Numerical and experimental study on aluminium pipe bending process

• Autorzy: Domanowski P. , Nowak B.
• Języki publikacji: EN

Abstrakty

EN

In this paper the analysis of cold working bending process of the aluminum pipe was presented based on both numerical simulations and experimental tests. The parameters such as wall thickness above and below bending axis were compared and discussed for both numerical simulations and experimental tests. The numerical simulations were performed in Abaqus 6.9/CAE computational environment on the basis of finite element method while the bending machine was designed and constructed for the purpose of tests. The usefulness of numerical simulations was also discussed.

Słowa kluczowe

EN

bending process; numerical simulations

• Wydawca: Faculty of Ocean Engineering and Ship Technology, Gdańsk University of Technology
• Czasopismo: Journal of Polish CIMAC
• Rocznik: 2011
• Tom: Vol. 6, no 3
• Strony: 33--42
• Opis fizyczny: Bibliogr. 8 poz., rys., tab.

Twórcy

autor

Domanowski P.

autor

Nowak B.

• University of Technology and Life Sciences in Bydgodszcz al. Prof. S. Kaliskiego 7, 85-789 Bydgoszcz, Poland,

Bibliografia

• [1] ABAQUS. Abaqus manuals. Inc. Providence, 2005.
• [2] Altan T, Metal forming handbook. Springer Verlag Berlin Heidelberg, 1998.
• [3] Bathe K. Finite Element Procedures. Prentice Hall, 1996.
• [4] Boyer H E. Atlas of strain-stress curves. ASM International, 1987.
• [5] Dixit U M, Dixit U S. Modeling of metal forming and machining processes by finite element and soft computing methods. Springer Verlag London, 2006.
• [6] Domanowski P, Wocianiec R. Structure Design and Numerical Control System of Automatic Pipe Bending Machine, 13th International Conference on Developments in Machinery Design and Control, Bydgoszcz, Poland 2009.
• [7] Wogoner R. H, Chenot U. S. Fundamentals of metal forming, Wiley, 1996.
• [8] Zienkiewicz O. C., Taylor R. L. The Finite Element Method Vol. 1. Butterworth-Heinemann, 2000.