PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
  • Sesja wygasła!
  • Sesja wygasła!
  • Sesja wygasła!
  • Sesja wygasła!
Tytuł artykułu

Pressure and velocity distribution in slide journal bearing lubricated micropolar oil

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This paper shows results of numerical solutions an modified Reynolds equations for laminar unsteady oil flow in slide journal bearing gap. Laminar unsteady oil flow is performed during periodic and unperiodic perturbations of bearing load or is caused by the changes of gap height in time. During modelling crossbar bearing operations in combustion engines, bearing movement perturbations from engine vertical vibrations causes velocity flow perturbations of lubricating oil on the shaft in the circumferential direction. This solution example apply to isothermal bearing model with infinity length. Lubricating oil used in this model has Newtonian properties and constant dynamic viscosity. Results are presented in the dimensionless hydrodynamic pressure and tangential tension distribution diagrams. Diagrams also presents capacity and friction force change during the time of velocity perturbations. Received solutions were compared with the solution received by the stationary lubrication flow in the slide journal bearing, which were made with the same parameter assumption by constant dynamic oil viscosity. Isothermal bearing model is similar to friction node model by steady-state heat load conditions. Described effect can be used as on example of modeling the bearing friction node operations in reciprocating movement during exploitation of engines and machines.
Rocznik
Strony
119--126
Opis fizyczny
Bibliogr. 6 poz., rys.
Twórcy
autor
  • Gdynia Maritime University ul. Morska 81-87,81-225 Gdynia, Poland tel.:+48 58 6901331, fax:+48 58 6901399, pawkras@am.gdynia.pl
Bibliografia
  • [1] Krasowski P.: Modelling of laminar unsteady and unsymetrical oil flow in slide journal bearing gap. Tribologia 5/2002, s. 1425-1436.
  • [2] Krasowski P.: Pressure and capacity forces in slide journal plane bearing by laminar unsteady lubrication. Journal of POLISH CIMAC , DIAGNOSIS, RELIABILITY AND SAFETY, Gdansk 2008, Vol.3 No. 2, pp. 91 – 98.
  • [3] Krasowski P.: Pressure and velocity distribution in slide journal bearing by laminar unsteady lubrication. Journal of KONES, POWERTRAIN AND TRANSPORT, Warsaw 2009, Vol.16 No. 2, pp. 239 – 246.
  • [4] Teipel I., Waterstraat A.: The Reynolds equation for lubrication under unsteady conditions. Proceedings The IX Canadian Congress of Applied Mechanics, University of Saskatchewan 1983, 497-502.
  • [5] Wierzcholski K.: Mathematical methods in hydrodynamic theory of lubrication, Technical University Press, Szczecin 1995.
  • [6] Wierzcholski K.: Teoria niekonwencjonalnego smarowania łożysk ślizgowych, Technical University Press, Szczecin 1995.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPG8-0035-0013
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.