PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Dobór impulsów o zadanym widmie do systemów UWB

Autorzy
Identyfikatory
Warianty tytułu
EN
Pulse spectrum design for UWB systems
Języki publikacji
PL
Abstrakty
PL
Przedstawiono obecny stan wiedzy w zakresie projektowania kształtu widma impulsów do ultraszerokopasmowych systemów radia impulsowego. Omówiono dobór widma sygnału UWB dotyczącego zarówno dostosowania widma do limitów mocy i zakresów częstotliwości zdefiniowanych w obowiązujących aktach prawnych, jak i spełnienia warunków międzysystemowej kompatybilności elektromagnetycznej radia impulsowego i systemów wąskopasmowych. Zawarto także wyniki badań symulacyjnych i pomiarów wpływu zakłóceń impulsowych na jakość transmisji w wąskopasmowych systemach radiowych.
EN
This paper presents the state of art in field of spectrum shaping for impulse radio ultra wideband systems. The problem of spectrum design is important for two reasons: emission limits from legislation documents and electromagnetic compatibility of impulse radio and existing narrowband devices. Results of measurements of narrowband transmission quality degradation in presence of impulse interferences are also included.
Rocznik
Tom
Strony
56--62
Opis fizyczny
Bibliogr. 24 poz., rys., tab.
Twórcy
autor
Bibliografia
  • [1] Katulski R., Sadowski J.: IEEE 802.15.4a Impulse Radio Spectrum Shaping by Changes in Pulse Sequence, mat. International Sympo-sium on Electromagnetic Compatibility, Kyoto 2009
  • [2] Decyzja Komisji Europejskiej nr 2007/131 /EC: On allowing the use of the radio spectrum for equipmerrt using ultra-wideband technology in a harmonised manner in the Community, 2007 r.
  • [3] Rozporządzenie Ministra Transportu z dnia 3 lipca 2007 r. w sprawie urządzeń radiowych nadawczych lub nadawczo-odbiorczych, które mogą być używane bez pozwolenia radiowego, Dz. U. nr 138 (2007) póz. 872
  • [4] Rozporządzenie Ministra Infrastruktury z dnia 29 lutego 2008 r. zmie¬niające rozporządzenie w sprawie urządzeń radiowych nadawczych lub nadawczo-odbiorczych, które mogą być używane bez pozwolenia radio¬wego, Dz. U. nr 47 (2008) póz. 277
  • [5] Federal Communications Commission, FCC 02-048, First report and order, 2002 r.
  • [6] Bbahhar F, Rivenq A, Heddebaut M., Rouvaen J.M.: Using UWB Gaussian pulses for inter-vehicle Communications, IEEE Proceedings - Communications, Vol 152, iss. 2,2005
  • [7] Bagga S., de Verta G., Haddad S., Serdijn W, Long J.: A PPM Gaussian Pulse Generator for Uttra-Wideband Communications, mat. International Symposium on Circuits and Systems, Vol. 1, 2004
  • [8] Corral C., Sibecas S., Emmami S., Stratis G.: Pulse Spectrum Optimization for Ultra-Wideband Communication, mat. IEEE Conference on Ultra Wideband Systems and Technologies, 2002
  • [9] Beaulieu N., Hu B.: On Determining a Best Pulse Shape for Multiple Access Ultra-Wideband Wireless Systems, mat. IEEE Global Telecommunications Conference, 2007
  • [10] Lu X,Chen W: A New UWB Pulse Design Method for Multiple Narrow-band Interference and Wide-band Interference Mitigation, mat. Fourth International Conference on Communications and Networking in China, 2009
  • [11] Pan B.,Crv B.,Wace Kuttrig Z., .A Novel Ultra Wkleband Pulse Design Algorithm, IEEE Communications Letters, Vol. 7, iss. 5, 2003
  • [12] IEEE Staridard for Information Technology, Part 802.15.4AmendmentĄ 2007
  • [13] Liao S., Ho M., Chen C., Chiu C., Chung W: A Novel DS-UWB Pulses Design Using Genetic Algorithm, mat. IEEE International Conference on Future Computer and Communication, 2009
  • [14] Ray K, Udar N., Viswanathan R.:A Weighted Sum of Gaussian-Derived Pulse Design for UWB, mat. IEEE Radio and Wireless Symposium, 2006
  • [15] Huang L, Zhang K, Lu Y: A Novel Method to Generate UWB Shaping Pulses Based on Chirp Pulse, mat. 6th International Conference on ITS Telecommunications, 2006
  • [16] Rambabu K., Yan-Wah M., Chan K., Bomemann J.: Design of Muttiple-Stopband Fitters for Interference Suppression in UWB Applications, IEEE Transactions on Microwave Theory and Technigues, Vol. 54, nr 8,2006
  • [17] Yamamoto Y, LJK.,Takizawa K,, Hashimoto O.: Tunable Notch Filters for DAA Implementation and Its Influence on UWB System performance, mat China-Japan Joint Microwave Conference, 2008
  • [18] Townsend K., Belostotski L, Haslett J., Nielsen J.: Ultra-Wideband Front-End With Tunable Notch Filter, mat. IEEE North-East Workshop on Circuits and Systems, 2006
  • [19] Kim C., Lim J., Jang J., Jung Y, Lee K, Lee M.: Design of the Wideband Notched Compact UWB Antenna, mat. Asia-Pacific Microwave Conference, 2007
  • [20] Chang T, Wu M.: Band-Notched Design for UWB Antennas, IEEE Anten¬nas and Wireless Propagation Letters, vol. 7,2008
  • [21] Kwon D, Kim Y, Chubinsky N.: A Printed Dipole UWB Antenna with GPS Frequency Notch Function, mat. IEEE Antennas and Propagation Society International Symposium, vd. 3A, 2005
  • [22] Wang Z., Hong W, Kuai Z., Yu C., Zhang Y, Dong Y: Compact Ultra-Wideband Antennas with Multiple Notches, mat. International Confe¬rence on Microwave and Milimeter Wave Technology, vol. 3, 2008
  • [23] Pancera E., Modotto D., Locatelli A., Pigozzo F, De Angelis C.: Novel Design of UWB Antenna with Band-Notch Capability, mat. 10th European Conference on Wireless Technology, 2007
  • [24] Elsherbini A., Zhang C., Fathy A., Mahfouz M.: Notch Bandwidth and Filter Order Trade-offs in Band-Notched Monopole Antennas for UWB Applications, mat. IEEE Antennas and Propagation Society International Symposium, 2008
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPG8-0028-0040
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.