Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
To improve bioactivity of titanium and titanium, the implant surface modification by formation of self-organized TiO2 nanotube arrays with electrochemical techniques is presented. The influence of electrolyte composition and deposition parameters during anodization is characterized. The enhancement of phosphates deposition by titanium nanotubular structure is discussed. The calcium phosphate ceramics is shown to be uniformly deposited on anodized titanium surface of a nanotubular oxide layer.
Wydawca
Czasopismo
Rocznik
Tom
Strony
25--41
Opis fizyczny
Bibliogr. 85 poz., rys., tab.
Twórcy
autor
- Gdansk University of Technology, Faculty of Mechanical Engineering, Department of Mechanical Engineering and Materials Strength, 80-952 Gdańsk, Poland
Bibliografia
- 1. Geetha M., Singh A.K., Asokamani R., Gogia A.K.: Ti based biomaterials, the ultimate choice for orthopaedic implants – A review. Progress in Materials Science 54 (2009) 397-425.
- 2. Ducheyne P., Qiu Q.: Bioactive ceramics: the effect of surface reactivity on bone formation and bone cell function. Biomaterials 20 (1999) 2287-2303.
- 3. Hedzelek W., Sikorska B., Domka L.: Evaluation of selected mechanical and chemical methods of modifications of titanium. Physicochemical Problems of Mineral Processing 39 (2005) 149-154.
- 4. Variola F., Yi J-H., Richert L., Wuest J.D., Rosei F., Nanci A.: Tailoring the surface properties of Ti6Al4V by controlled chemical oxidation. Biomaterials 29 (2008) 1285-1298.
- 5. Jonasova L., Muller F.A., Helebrant A., Strnad J., Greil P.: Biomimetic apatite formation on chemically treated titanium. Biomaterials 25 (2004) 1187-1194.
- 6. Maiyalagan T., Viswanathan B., Varadaraju U.V.: Fabrication and characterization of uniform TiO2 nanotube arrays by sol-gel template method. Bull. Mater. Sci., vol.29 (7) (2006) 705-708.
- 7. Raja K.S., Misra M., Paramguru K.: Deposition of calcium phosphate coating on nanotubular anodized titanium. Materials Letters 59 (2005) 2137-2141.
- 8. Yu X., Li Y., Wlodarski W., Kandasamy S., Kalantar-Zadeh K.: Fabrication of nanostructured TiO2 by anodization: A comparision between electrotyles and substrates. Sensors and Actuators B 130 (2008) 25-31.
- 9. Lee J-H., Kim S-E., Kim Y-J., Chi Ch-S., Oh H-J.: Effects of microstructure of anodic titania on the formation of bioactive compounds. Materials Chemistry and Physics 98 (2006) 39-43.
- 10. Kodama A., Bauer S., Komatsu A., Asoh H., Ono S., Schmuki P.: Bioactivation of titanium surfaces using coatings of TiO2 nanotubes rapidly pre-loaded with synthetic hydroxyapatite. Acta Biomaterialia (2009), Article in progress.
- 11. Oh H-J., Lee J-H., Kim Y-J., Suh S-J., Lee J-H, Chi Ch-S.: Surface characteristics of porous anodic TiO2 layer for biomedical applications. Materials Chemistry and Physics 109 (2008) 10-14.
- 12. Xiao X-F., Liu R-F,, Tian T.: Preparation of bioactive titania nanotube arrays in HF/Na2HPO4 electrolyte. Journal of Alloys and Compounds 466 (2008) 356-362.
- 13. Krupa D., Baszkiewicz J., Sobczak J.W., Biliński A., Barcz A.: Modifying the properties of titanium surface with the aim of improving its bioactivity and corrosion resistance. Journal of Materials Processing Technology 143-144 (2003) 158-163.
- 14. Oh S., Jin S.: Titanium oxide nanotubes with controlled morphology for enhanced bone growth. Materials Science and Engineering C 26 (2006) 1301-1306.
- 15. Kim S.E., Lim J.H., Lee S. C., Nam S-C., Kang H-G., Choi J.: Anodically nanostructured titanium dioxides for implant applications. Electrochimica Acta 53 (2008) 4846-4851.
- 16. Zhang L., Chen Y., Rodriguez J., Fenniri H., Webster T.: Biomimetic helical rosette nanotubes and nonocrystalline hydroxyapatite coatings on titanium for improving orthopedic implants. Int. Journal of Nanomedicine 3(3) (2008) 323-333.
- 17. Li M., Xiao X., Liu R.: Synthesis and bioactivity of highly ordered TiO2 nanotube arrays. Applied Surface Science 255 (2008) 365-367.
- 18. Varhgese O.K., Gong D., Paulose M., Ong K.G., Grimes C.A.: Hydrogen sensing using titania nanotubes. Sensors and Actuators, B 93, 1-3 (2003) 338-344.
- 19. Liang Ch., Li X.: Effects of structure of anodic TiO2 nanotube arrays on photocatalytic activity for the degradation of 2,3-dichlorophenol in aqueous solution. Journal of Hazardous Materials 162 (2009) 1415-1422.
- 20. Baram N., Starosvetsky D., Starosvetsky J., Epshtein M., Armon R., Ein-Eli Y.: Enhanced inactivation of E. coli bacteria using immobilized porous TiO2 photoelectrocatalysis. Electrochimica Acta 54 (2009) 3381-3386.
- 21. Yu H., Yu J., Cheng B., Lin J.: Synthesis, characterization and photocatalytic activity of mesoporus titania nanorod/titanate nanotube composites. Journal of Hazardous Materials 147 (2007) 581-587.
- 22. Vitiello R.P., Macak J.M., Ghicov A., Tsuchiya H., Dick L.F.P., Schmuki P.: N-Doping of anodic TiO2 nanotubes using heat treatment in ammonia. Electrochemistry Communications 8 (2006) 544-548.
- 23. Tsuchiya H., Macak J.M., Ghicov A., Rader A.S., Taveira L., Schmuki P.: Characterization of electronic properties of TiO2 nanotube films. Corrosion Science 49 (2007) 203-210.
- 24. Fahim N.F., Morks M.F., Sekino T.: Electrochemical synthesis of silica-doped high aspect-ratio titania nanotubes as nanobioceramics for implant applications. Electrochimica Acta 54 (2009) 3255-3269.
- 25. Bauer S., Park J., Mark K., Schmuki P.: Improved attachment of mesenchymal stem cells on super-hydrophobic TiO2 nanotubes. Acta Biomaterialia 4 (2008) 1576-1582.
- 26. Kunze J., Muller L., Macak J.M., Greil P., Schmuki P., Muller F.A.: Time-dependent growth of biomimetic apatite on anodic TiO2 nanotubes. Electrochimica Acta 53 (2008) 6995-7003.
- 27. Zhang W., Li G., Li Y., Yu Z., Xi Z.: Fabrication of TiO2 nanotube arrays on biologic titanium alloy and properties. Trans. Nonferrous Met. Soc. China 17 (2007) 692-695.
- 28. Kaneco S., Chen Y., Westerhoff P., Crittenden J.C.: Fabrication of uniform size titanium oxide nanotubes: Impact of current density and solution conditions. Scripta Materialia 56 (2007) 373-376.
- 29. Petukhov D.I., Eliseev A.A., Kolesnik I.V., Napolskii K.S., Lukashin A.V., Tretyakov Y.D., Grigoriev S.V., Grigorieva N.A., Eckerlebe H.: Formation mechanism and packing options in tubular anodic titania films. Microporous and Mesoporous Materials 114 (2008) 440-447.
- 30. Bauer S., Kleber S., Schmuki P.: TiO2 nanotubes: Tailoring the geometry in H3PO4/HF electrolytes. Electrochemistry Communications 8 (2006) 1321-1325.
- 31. Crawford G.A., Chawla N.: Porous hierarchical TiO2 nanostructures: Processing and microstructure relationships. Acta Materialia 57 (2009) 854-867.
- 32. Crawford G.A., Chawla N., Das K., Bose S., Bandyopadhyay A.: Microstructure and deformation behavior of biocompatible TiO2 nanotubes on titanium substrate. Acta Biomaterialia 3 (2007) 359-367.
- 33. Das K., Balla V.K., Bandyopadhyay A., Bose S.: Surface modification of laser-processed porous titanium for load-bearing implants. Scripta Materialia 59 (2008) 822-825.
- 34. Narayanan R., Seshadri S.K.: Point defect model and corrosion of anodic oxide coatings on Ti-6Al-4V. Corrosion Science 50 (2008) 1521-1529.
- 35. Wilks R.G., Santos E., Kurmaev E.Z., Yablonskikh M.V., Moewes A., Kuromoto N.K., Soares G.A.: Characterization of oxide layers formed on electrochemically treated Ti by using soft X-ray absorption measurements. Journal of Electron Spectroscopy and Related Phenomena 169 (2009) 46-50.
- 36. Macak J.M., Tsuchiya H., Ghicov A., Yasuda K., Hahn R., Bauer S., Schmuki P.: Current Opinion in Solid State and Materials Science 11 (2007) 3-18.
- 37. Cai Q., Yang L., Yu Y.: Investigations on the self-organized growth of TiO2 nanotube arrays by anodic oxidation. Thin Solid Films 515 (2006) 1802-1806.
- 38. Kuromoto N.K., Simao R.A., Soares G.A.: Titanium oxide films produced on commercially pure titanium by anodic oxidation with different voltages. Materials Characterization 58 (2007) 114-121.
- 39. Enyashin A.N., Ivanovskii A.L.: Theoretical study on the structure and electronic properties of TiO2 nanotubes and nanowires. Journal of Molecular Structure: THEOCHEM 766 (2006) 15-18.
- 40. Macak J.M., Tsuchiya H., Ghicov A., Schmuki P.: Formation and properties of anodic TiO2 nanotube layers. Electrochemical Communications 7 (2005) 1133-1137.
- 41. Bestetti M., Franz S., Cuzzolin M., Arosio P., Cavallotti P.L.: Structure of nanotubular titanium oxide templates prepared by electrochemical anodization in H2SO4/HF solutions. Thin Solid Films 515 (2007) 5253-5258.
- 42. Prida V.M., Manova E., Vega V., Hernandez-Velez M., Aranda P., Pirota K.R., Vazquez M., Ruiz-Hitzky E.: Temperature influence on the anodic growth of self-aligned titanium dioxide nanotube arrays. Journal of Magnetism and Magnetic Materials 316 (2007) 110-113.
- 43. Beranek R., Hildebrand H., Schmuki P.: Self-organized porous titanium oxide prepared in H2SO4/HF electrolytes. Electrochemical Solid State Letters 6 (2003) B12-4.
- 44. Mor G.K., Varghese O.K., Paulose M., Mukherjee N., Grimes C.A.: Fabrication of tapered, conical-shaped titania nanotubes. Journal of Materials Research 18 (2003) 2588-2593.
- 45. Raja K.S., Misra M., Paramguru K.: Formation of self-ordered nanotubular structure of anodic oxide layer on titanium. Electrochemical Acta 51 (2005) 154-165.
- 46. Tian T., Xiao X., Liu R., She H., Hu X.: Study on titania nanotube arrays prepared by titanium anodization in HN4F/H2SO4 solution. Journal of Materials Science 42 (2007) 5539-3342.
- 47. Aldabergenova S.B., Ghicov A., Albu S., Macak J.M., Schmuki P.: Smooth titania nanotubes: Self-organization and stabilization of anatase phase. Journal of Non-Crystalline Solids 354 (2008) 2190-2194.
- 48. Tao J., Zhao J., Wang X., Kang Y., Li Y.: Fabrication of titania nanotube arrays oncurved surface. Electrochemistry Communications 10 (2008) 1161-1163.
- 49. Yang B., Uchida M., Kim H.M., Zhang X., Kokubo T.: Preparation of bioactive titanium metal via anodic oxidation treatment. Biomaterials 25 (2004) 1003-1010.
- 50. Wang Y., Tao J., Wang L., He P., Wang T.: HA coating on titanium with nanotubular anodized TiO2 intermediate layer via electrochemical deposition. Transactions of Nonferrous Metals Society of China 18 (2008) 631-635.
- 51. Berger S., Jakubka F., Schmuki P.: Formation of hexagonally ordered nanoporous anodic zirconia. Electrochemistry Communications 10 (2008) 1916-1919.
- 52. Macak J.M., Schmuki P.: Anodic growth of self-organized anodic TiO2 nanotubes in viscous electrolytes. Electrochimica Acta (2006) 1258-1264.
- 53. Raja K.S., Gandhi T., Misra M.: Effect of water content of ethylene glycol as electrolyte for synthesis of ordered titania nanotubes. Electrochemistry Communications 9 (2007) 1069-1076.
- 54. Allam N.K., Grimes C.A.: Effect of cathode material on the morphology and photoelectrochemical properties of vertically oriented TiO2 nanotube arrays. Solar Energy Materials & Solar Cells 92 (2008) 1468-1475.
- 55. Vega V., Cerdeira M.A., Prida V.M., Alberts D., Bordel N., Pereiro R., Mera F., Garcia S., Hernandez-Velez M., Vazquez M.: Electrolyte influence on the anodic synthesis of TiO2 nanotube arrays. Journal of Non-Crystalline Solids 354 (2008) 5233-5235.
- 56. Xiao X., Tian T., Liu R., She H.: Influence of titania nanotube arrays on biomimetic deposition apatite on titanium by alkali treatment. Materials Chemistry and Physics 106 (2007) 27-32.
- 57. Zhao J., Wang X., Chen R., Li L.: Fabrication of titanium oxide nanotube arrays by anodic oxidation. Solid State Communications 134 (2005) 705-710.
- 58. Oh S-H., Finones R.R., Daraio C., Chen L-H., Jin S.: Growth of nano-scale hydroxyapatite using chemically treated titanium oxide nanotubes. Biomaterials 26 (2005) 4938-4943.
- 59. Popat K.C., Leoni L., Grimes C.A., Desai T.A.: Influence of engineered titania nanotubular surfaces on bone cells. Biomaterials 28 (2007) 3188-3197.
- 60. Macak J.M., Schmidt-Stein F., Schmuki P.: Efficient oxygen reduction on layers of ordered TiO2 nanotubes loaded with Au nanoparticles. Electrochemistry Communications 9 (2007) 1783-1787.
- 61. Sieber I., Hildebrand H., Friedrich A., Schmuki P.: Formation of self-organized niobium porous oxide on niobium. Electrochemistry Communications 7 (2005) 97-100.
- 62. Crawford G.A., Chawla N.: Tailoring TiO2 nanotube growth during anodic oxidation by crystallographic orientation of Ti. Scripta Materialia 60 (2009) 874-877.
- 63. Zhao J., Wang X., Sun T., Li L.: Crystal phase transition and properties of titanium oxide nanotube arrays prepared by anodization. Journal of Alloys and Compounds 434-435 (2007) 792-795.
- 64. Yang Y., Wang X., Li L.: Synthesis and growth mechanism of graded TiO2 nanotube arrays by two-step anodization. Materials Science and Egnineering B 149 (2008) 58-62.
- 65. Ghicov A., Tsuchiya H., Hahn R., Macak J.M., Munoz A.G., Schmuki P.: TiO2 nanotubes: H+ insertion and strong electrochromic effects. Electrochemistry Communications 8 (2006) 528-532.
- 66. Munoz A.G.: Semiconducting properties of self-organized TiO2 nanotubes. Electrochimica Acta 52 (2007) 4167-4176.
- 67. Hokkanen B., Funk S., Burghaus U., Ghicov A., Schmuki P.: Adsorption kinetics of alkanes on TiO2 nanotubes array – structure – activity relationship. Surface Science 601 (2007) 4620-4628.
- 68. Balaur E., Macak J.M., Taveira L., Schmuki P.: Tailoring the wettability of TiO2 nanotube layers. Electrochemistry Communications 7 (2005) 1066-1070.
- 69. Tsuchiya H., Macak J.M., Ghicov A., Tang Y.Ch., Fujimoto S., Niinomi M., Noda T., Schmuki P.: Nanotube oxide coating on Ti-29Nb-13Ta-4.6Zr alloy prepared by self-organizing anodization. Electrochimica Acta 52 (2006) 94-101.
- 70. Yasuda K., Schmuki P.: Control of morphology and composition of self-organized zirconium titanate nanotubes formed in (HN4)2SO4/NH4F electrolytes. Electrochimica Acta 52 (2007) 4053-4061.
- 71. Wang N., Li X., Wang Y., Hou Y., Zou X., Chen G.: Synthesis of ZnO/TiO2 nanotube composite film by a two-step route. Materials Letters 62 (2008) 3691-3693.
- 72. Ryu W.H., Park C.J., Kwon H.S.: Synthesis of highly ordered TiO2 nanotube in malonic acid solution by anodization. Journal of Nanoscience and Nanotechnology 8 (2008) 1-4.
- 73. Tian T., Xiao X-F., She H-D., Liu R-F.: Biomimetic growth of apatite on titania nanotube arrays fabricated by titanium anodization in HN4F/H2SO4 electrolyte. Materials Science-Poland, vol.8, no.3 (2008) 487-494.
- 74. Ghicov A., Tsuchiya H., Macak J.M., Schmuki P.: Titanium oxide nanotubes prepared in phosphate electrolytes. Electrochemistry Communications 7 (2005) 505-509.
- 75. Luo B., Yang H., Liu S., Fu W., Sun P., Yuan M., Zhang Y., Liu Z.: Fabrication and characterization of self-organized mixed oxide nanotube arrays by electrochemical anodization of Ti-6Al-4V alloy. Materials Letters 62 (2008) 4512-4515.
- 76. Macak J.M., Hildebrand H., Marten-Jahns U., Schmuki P.: Mechanistic aspects and growth of large diameter self-organized TiO2 nanotubes. Journal of Electroanalytical Chemistry 621 (2008) 254-266.
- 77. Feng X., Macak J.M., Schmuki P.: Flexible self-organization of two size-scales oxide nanotubes on Ti45Nb alloy. Electrochemistry Communications 9 (2007) 2403-2407.
- 78. Feng X.J., Macak J.M., Albu S.P., Schmuki P.: Electrochemical formation of self-organized anodic nanotube coating on Ti-28Zr-8Nb biomedical alloy surface. Acta Biomaterialia 4 (2008) 318-323.
- 79. Cai Q., Paulose M., Varghese O.K., Grimes C.A.: The effect of electrolyte composition on the fabrication of self-organized titanium oxide nanotube arrays by anodic oxidation. Journal of Materials Research 20 (2005) 230-236.
- 80. Tsuchiya H., Macak J.M., Ghicov A., Taveira L., Schmuki P.: Self-organized porous TiO2 and ZrO2 produced by anodization. Corrosion Science 47 (2005) 3324-3335.
- 81. Taveira L.V., Macak J.M., Tsuchiya H., Dick L.F.P., Schmuki P.: Voltage oscillations and morphology during the galvanostatic formation of TiO2 nanotubes. Journal of Electrochemical Sciences 152 (2005) B405.
- 82. Yasuda K., Schmuki P.: Electrochemical formation of self-organized zirconium titanate nanotube multilayers. Electrochemistry Communications 9 (2007) 615-619.
- 83. Narayanan R., Seshadri S.K., Kwon T.Y., Kim K.H.: Electrochemical nano-grained calcium phosphate coatings on Ti-6Al-4V for biomaterial applications. Scripta Materialia 56 (2007) 229-232.
- 84. Webster T.J., Ejiofor J.U.: Increased osteoblast adhesion on nanophase metals: Ti, Ti6Al4V, and CoCrMo. Biomaterials 25 (2004) 4731-4739.
- 85. ISO Standard : ISO 13779:2-2008: http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=43827
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPG8-0018-0040