Identification Of Quasi-Static Cutting Force Of Triticale-Straws For Designing Use Of Scissor And Finger Cutting Sets

• Autorzy: Bochat A.
• Języki publikacji: EN

Abstrakty

EN

In the article there are presented empirical study results of quasi-static cutting force of triticale-straws. Research conducted on the testing machine INSTRON 8501 showed unambiguously that along with increase of cutting angle relevant to symmetry axis of straws in the range from 0 to 150, cutting force value approximately linearly decreases. In that case, it is necessary to check in an empirical way whether mentioned phenomenon occurs with cutting straws by means of scissor and finger cutting set (simultaneous cutting of a few dozen or a few hundred straws). Established change range of straw cutting angle is possible to realize during work of scissor and finger cutting set in field conditions.

Słowa kluczowe

EN

scissor and finger cutting sets; cutting; stalk of corn

• Wydawca: Faculty of Ocean Engineering and Ship Technology, Gdańsk University of Technology
• Czasopismo: Journal of Polish CIMAC
• Rocznik: 2009
• Tom: Vol. 4, no 3
• Strony: 17--22
• Opis fizyczny: Bibliogr. 2 poz., rys., tab.

Twórcy

autor

Bochat A.

• University of Technology and Life Sciences in Bydgoszcz Mechanical Engineering Faculty Department of Agricultural Engineering al. Kaliskiego 7, 85-789 Bydgoszcz, Poland,

Bibliografia

• [1] Bochat A., Błaszczyk M., Zastempowski M., Research issues of single straw and stem cutting process, Chemical Engineering and Apparatus no. 1/2007.
• [2] Chattopahyay P.S., Pandey K.P., Mechanical properties of sorghum in relation to quasi-static deformation, Journal of Agricultural Engineering Research, Vol.73, 1999.