The role of finishing, operations in a tube plastic forming process

• Autorzy: Topolska S.
• Języki publikacji: EN

Abstrakty

EN

The paper presents the analysis of the role of fnishing operations in a process of plastic forming, The quality level in plastic forming is strongly related with the quality level of finishing operations, These operations ale different for various plastic forming processes, In this paper the pipe manufacturing process bas been chosen as an example of the plastic forming process, The base technological operations are: rolling and welding, But the main technological operations ale considered in the connection to finishing process, They mainly influence the quality image of a producer. During these operations it is possible to diagnose and correct a lot of manufacturing faults and prepare the product for dispatching, The in finishing operations ale: machining, cleaning and checking.

Słowa kluczowe

EN

plastic forming; finishing; quality assessment

• Wydawca: Politechnika Gdańska
• Czasopismo: Advances in Materials Science
• Rocznik: 2007
• Tom: Vol. 7, nr 2(12)
• Strony: 327--333
• Opis fizyczny: Bibliogr. 7 poz., rys., tab.

Twórcy

autor

Topolska S.

• Silesian University of Technology, Faculty of Mechanical Engineering Institute of Engineering Materials and Biomaterials Gliwice, Poland

Bibliografia

• [1] Karkoszka T., Szewieczek D.: Analysis of the wire rod superficial processing based on the quality criterion, Journal of Achievements of Material and Manufacturing Engineering 2006, Vol. 18, Issue 1-2, pp. 443-446.
• [2] Gzieło A., Koszkul J., Kwiatkowski D., Pietrzak M., Świerczyński H.: Quality control system for the process of continuous casting of steel, Journal of Achievements of Material and Manufacturing Engineering 2006, Vol. 17, Issue 1-2, pp. 333-336.
• [3] Topolska S., Szewieczek D.: The Visualization of a Manufacturing Process of Pipes Welding, Journal of Achievements in Materials and Manufacturing Engineering 2007, Vol. 20, Issue 1-2, pp. 575 - 578.
• [4] Haga T., Watari H., Kumai S.: High speed roll casting of Mg alloy strip by a vertical type twin roll caster, Journal of Achievements of Material and Manufacturing Engineering 2006, Vol. 15, Issue 1-2, pp. 186-192.
• [5] Blicharski M.: Material Engineering. Steel, WNT, Warszawa 2004 (in Polish)
• [6] Oakland J.: Total quality management, Oxford Press, Oxford 1994.
• [7] Goetsch D., Davis S.: Quality management, Prentice Hall, New York 2005.