Influence of linear rate constant on parabolic process of oxidation of low-carbon steel

• Autorzy: Adamaszek K. , Jurasz Z.
• Języki publikacji: EN

Abstrakty

EN

In this paper we give a presentation of the recently developed approaches concerned of the rate of oxidation the Arema steel at high-temperature in first stage of this process. The comparison analysis was performed on the basis of the experimental results of oxidation of cylindrical specimens made of above steel. The experiment was carried out in chamber furnace on series of specimens with dimension '" = 20 . 1=30 mm. The specimens were oxidised at 1000°C for 10 - 2280 minutes in air and then quenched in silica sand, afterwards were measured both with and without of scale.

Słowa kluczowe

EN

high-temperature; oxidation; linear and parabolic rate constant

• Wydawca: Politechnika Gdańska
• Czasopismo: Advances in Materials Science
• Rocznik: 2007
• Tom: Vol. 7, nr 2(12)
• Strony: 236--241
• Opis fizyczny: Bibliogr. 8 poz., rys., tab.

Twórcy

autor

Adamaszek K.

autor

Jurasz Z.

• Automotive Research and Development Center "BOSMAL", Bielsko-Biała, Poland

Bibliografia

• [1] Kučera J., Hajduga M.: High-Temperature and Long-Time Oxidation of Iron and Steels, University of Bielsko-Biała, 1998.
• [2] Mrowiec S., Weber T.: Teoria gazowa metali, ed., Wyd. Śląsk, Katowice, 1975.
• [3] Mrowiec S.: Kinetyka i mechanizm utleniania stali. ed., Wyd. Śląsk, Katowice, 1982.
• [4] Mrowiec S., T. Weber T.: Nowoczesne materiały żaroodporne. WNT, Warszawa, 1982.
• [5] Kofstad P.: High Temperature Corrosion, ed., Elsevier, London, 1988.
• [6] Kubaschewski O., Hopkins RE.: Oxidation of Metals and Alloys. Butterworths, London, 1962.
• [7] Volk W.: Statystyka stosowana dla inżynierów. PWN, Warszawa, 1973.
• [8] Kučera J. Adamaszek K., Jurasz Z.: Proceedings of the VIII Seminar Diffusion and Thermodynamics of Materials, Brno, September, 4- 6 th, (2002), pp. 184-187.