Study of pool boiling and critical beat flux enhancement in nanofluids

• Autorzy: Kim S.J. , Bang I.C. , Buongiorno J. , Hu L.W.
• Języki publikacji: EN

Abstrakty

EN

The pool boiling characteristics of dilute dispersions of alumina, zirconia and silica nanoparticles in water were studied. These dispersions are known as nanofluids. Consistently with other nanofluid studies, it was found that a significant en-hancement in Critical Heat Flux (CHF) can be achieved at modest nanoparticle concentrations ( <0.1% by volume). Buildup of a porous layer of nanoparticles on the heater surface occurred during nucleate boiling. This layer significantly improves the surface wettability, as shown by a reduction of the static contact angle on the nanofluid-boiled surfaces compared with the pure-water-boiled surfaces. CHF theories support the nexus between CHF enhancement and surface wettability changes. This represents a first important step towards identification of a plausible mechanism for boiling CHF enhancement in nanofluids.

Słowa kluczowe

EN

nanoparticle deposition; critical beat flux; pool boiling; wettability; contact angle

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2007
• Tom: Vol. 55, nr 2
• Strony: 211--216
• Opis fizyczny: Bibliogr. 24 poz., rys.

Twórcy

autor

Kim S.J.

autor

Bang I.C.

autor

Buongiorno J.

autor

Hu L.W.

• Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, 02139-4307 MA, USA,

Bibliografia

• [1] S.M. You, J. Kim, and KH. Kim, "Effect of nanoparticles on critical heat flux of water in pool boiling heat transfer", Applied Physics Letters 83 (16), 3374-3376 (2003).
• [2] P. Vassallo, R. Kumar, and S.D'Amico, "Pool boiling heat transfer experiments in silica-water nano-fluids", Int. J. Heat and Mass Transfer 47, 407-411 (2004).
• [3] I. C. Bang and S. H. Chang, "Boiling heat transfer performance and phenomena of AbO3-water nano-fluids flam a plain surface in a pool", Int. J. Heat and Mass Transfer 48, 2407-2419 (2005).
• [4] D. Milanova and R. Kumar, "Role of ions in pool boiling heat transfer of pure and silica nanofluids", Applied Physics Letters 87, 233107 (2005).
• [5] H. Kim, J. Kim, and M. Kim, "Experimental study on CHF characteristics of water- TiO2 nano-fluids", Nuclear Engineering and Technology 38 (1), 2006.
• [6] S.J. Kim, B. Truong, J. Buongiorno, L.W. Hu, and I.C. Bang, "Study of two-phase heat transfer in nanofluids for nuclear applications", Proc. ICAPP '06, USA, paper 6005 (2006).
• [7] J. Buongiorno and L.-W. Hu, "Nanofluid coolants for advanced nuclear power plants", Proc. ICAPP '05, paper 5705 (2005).
• [8] S. Das, N. Putra, and W. Roetzel, "Pool boiling characteristics of nano-fluids", Int. J. Heat and Mass Transfer 46, 851-862 (2003).
• [9] J.G. Collier and J.R Thome, Convective Boiling and Condensation, 3rd ed., Science Publications, Oxford, 1996.
• [10] R. Cole and W. Rosenhow, "Correlation of bubble departure diameters for boiling of saturated liquids", Chem. Eng. Prog. Symp. Ser. 65 (92), 211-213 (1969).
• [11] T.N. Dinh, J.P. Thu, and T.G. Theofanous, "Burnout in high heat flux boiling: the hydrodynamic and physico-chemical factors", 42nd AIAA .Aerospace Sciences Meeting and Exhibit, Nevada, 2004.
• [12] D. Wen and Y. Ding, "Experimental investigation into the pool boiling heat transfer of aqueous based ,-alumina nanofluids", J. Nanoparticle Research 7, 265-274 (2005).
• [13] C.H. Wang and V.K. Dhir, "Effect of surface wettability on active nucleation Bite density during pool boiling of water on a vertical surface", J. Heat Transfer 115, 659-669 (1993).
• [14] S.S. Kutateladze, "Heat transfer in condensation and boiling", AEC-TR-3770 (1952).
• [15] N. Zuber, "Hydrodynamic aspects of boiling heat transfer", AECU-4439 (1959).
• [16] Y. Haramura and Y. Katto, "A new hydrodynamic model of CHF applicable widely to both pool and forced convection boiling on submerged bodies in saturated liquids", Int. J. Heat and Mass Transfer 26, 389-399 (1983).
• [17] P. Sadasivan, P.R. Chappidi, C. Unal, and R.A. Nelson, "Possible mechanisms of macrolayer formation", Poland External Flow Boiling (ASME 1992), 135 (1992).
• [18] Y. Katto and S. Yokoya, "Principal mechanism of boiling crisis in pool boiling", Int. J. Heat and Mass Transfer 11, 993-1002 (1968).
• [19] T.G. Theofanus et al, "The boiling crisis phenomenon. Part II: dryout dynamics and burnout", Experimental Thermal and Fluid Science 26, 793-810 (2002).
• [20] W. Rosenhow and P. Griffith, "Correlation of maximum heat flux data for boiling of saturated liquids", Chem. Eng. Prog. Symp. Ser. 52 (18), 47-49 (1956).
• [21) N. Kolev, "How accurately call we predict nucleate boiling?", in Multiphase Flow Dynamics 2, Springer, Berlin, 2002.
• [22] S. Kim, LC, Bang, J. Buongiorno and L.-W. Hu, "Surface wettability change during pool boiling of nanofluids and its effect on critical heat flux", Int. J. Heat and Mass Transfer (2007), (to be published).
• [23] S.J. Kim, LC. Bang, J. Buongiorno, and L.W. Hu, "Surface wettability change during pool boiling of nanofluids and its effect on critical heat flux", Int. J. Heat and Mass Transfer 50, 4105-4116 (2007).
• [24] S.V. Gupta, "Capillary action in narrow and tubes - a unified approach", Metrology 41, 361-364 (2004), (in Polish).