Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
In this study, the environmentally cracking (EAC) behavior of 7010 Al-alloy was examined using slow strain rate technique (SSRT), This study brings out the developments on the heat treatment and alloying to improve the EAC resistance of 7010 Al-alloy. The effect of microstructures including the grain boundary precipitates, coarse metallic particles and recrystallized grains on the EAC behavior of 7010 Al-alloy has been examined
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
21--26
Opis fizyczny
Bibliogr. 14 poz., rys., tab.
Twórcy
autor
autor
- Dept. of Metallurgical Engineering and Materials Science IIT Bombay Mumbai 400 076, INDIA
Bibliografia
- [1] M. Puiggali, A. Zielinski, J.M. Olive, E. Renauld, D. Desjardins, M. Cid, Corro. Sci., (1998), 40, 805.
- [2] J.S. Robinson, Mater. Sci. Forum, (2000),pp. 331-337,1653.
- [3] M. Bobby-Kannan, V.S. Raja, R. Raman and A .K Mukhopadhyay, Corrosion, (2003), 59,881.
- [4] M. Bobby Kannan, V.S. Raja, and A .K. Mukhopadhyay, Scripta Mater., (2004), 51, 1075.
- [5] M. Bobby Kannan, V.S. Raja, A .K Mukhopadhyay and P. Schmuki, Metall. and Mater. Trans. A, (2005), 36,3257.
- [6] M. Hobby Kannan, "Role of multistep aging and scandium addition on the environmentally assisted cracking and exfoliation behavior of 7010 Al-alloy" Ph.D. thesis, Indian Institute of Technology Bombay, India, May 2005.
- [7] M. Bobby Kannan, V.S. Raja, J. Materials Sc., (Accepted).
- [8] A.K. Mukhopadhyay, G.M. Reddy, KS. Prasad, S.V. Kamat, A. Dutta and c.Mondal, "Influence of scandium addition on the microstructure and properties of AA 7010 alloy sheets", J.T.Sta1ey Honorary Symposium on Al Alloys, Advances in the Metallurgy of Al Alloys, ASM International (Indianapolis, USA, November 5-8, (2001), 63.
- [9] D. Najjar, T. Magnin, J.J. Warner, Mater. Sci. Eng. A, (1997), 238, 293.
- [10] RC Newman, T Shahrabi, K Sieradzki., Scripta Metall., (1989), 23, 71.
- [11] LA. Willey: US Patent 3619181, (1971).
- [12] Y. Wu, F.H. (Sam) Froes, C. Li, and A Alvarez, Metall. and Mater. Trans. A, (1999), 30, 1017.
- [13] Y. Zhi-min, Y. Lei, P. Qing-lin, and J. Feng, Trans. of the Nonferrous Metals Soc. of China, 2001,11, 822.
- [14] Y.W. Ridd1e, and T.H. Sanders J.I., Mater. Sci. Forum, (2000), pp. 331-337, 799.l
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPG5-0025-0003