Technologies in rapid pro duet development

• Autorzy: Chlebus E.
• Języki publikacji: EN

Abstrakty

EN

The manufacture and consumption of market pro duet s show ever growing trends, and this means not only the supply and demand volume but also, to a higher and higher extent, searching for new pro duet s distinguishable from the variety of pro duet s on the market. Thus, it is necessary to find methods of functional, logical and structural combination of the so far existing engineering applications like CAx, RP /RT /RE, PDM/TDM, PPC/ERP, CE/SE and RDBMS techniques. A new challenge imposed on manufacturers by the competitive market is the so-called "product customization", i.e. attending to an individual customer's requirements in the features of a series manufactured product. The general objective of customisation is to elaborate features of a product, manufacturing processes, documentation and production organisation in such a way that the product's individual features meet the customer's requirements and its manufacturing process, price and service do not stray from series manufactured products.

Słowa kluczowe

EN

integrated product and process development; CAx tools; rapid technologies; process modelling and simulation

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2007
• Tom: Vol. 55, nr 1
• Strony: 71--83
• Opis fizyczny: Bibliogr. 19 poz., rys., tab.

Twórcy

autor

Chlebus E.

• Institute of Mechanical Engineering and Automation, Wrocław University of Technology, 5 Lukasiewicza St., 50-371 Wrocław, Poland,

Bibliografia

• [1] C.O. Bauer, "Produkthaftung-Anspruche an die Konstruktion haben einen Anteil von 70%", Maschinenmarkt 68, (1984).
• [2] M. Eiger, "Requirements with regard to PDM system architecture and funcionality - a vendors report", Proc. Product Data Management based on International Standards AG, Braunschwaig, 1999.
• [3] E. Chlebus, B. Dybała, and T. Boratyński, "Measurements methods of macrogeometry of free surfaces in digitizing of physical objects", Metrology Congress, Wrocław, 2004, (in Polish).
• [4] A. Gebhardt, Rapid Prototyping - Werkzeuge Jur die schnelle Produktentwicklung, Hanser, München, 1996.
• [5] K. Oczoś, "Rapid prototyping and rapid tooling - development of methods and techniques of rapid manufacture of models, prototypes and small-series products", Mechanics 4, (1998), (in Polish).
• [6] E. Westkämper, Manufuture - A Vision for 2020, Hannover, 2004.
• [7] E. Chlebus, Innovative Rapid Prototyping-Rapid Tooling Technologies in Product Development, Centre for Advanced Manufacturing Technologies, Wrocław University of Technology, Wrocław, 2003.
• [8] Wohlers Report 2006, Rapid Prototyping, Tooling Manufacturing State of the Industry, Annual Worldwide Progress Report, Wohlers Associates, Inc., Oak Ridge Bussines Park, 2006.
• [9] E. Chlebus and M. Cholewa, "Rapid prototyping – rapid tooling", CADCAM FORUM, 23-29 (1999).
• [10] www.stereolithography.com/rapidprototyping.Php
• [11] X. Wu, Direct Laser Fabrication, Politechnika Wrocławska, Wrocław 2002.
• [12] E. Chlebus and T. Kurzynowski, "Review of rapid prototyping techniques to the construction of metal prototype models", Surface Mining 5-6, 71-74 (2006), (in Polish).
• [13] T. Kurzynowski, A. Lipowicz, and B. Dybała, "Customised medical model building with selective laser melting", Production Engineering, 105-111 (2006).
• [14] B. Dybała and M. Frankiewicz, "Extremal time shortening of a cycle by using configurations of the conformal cooling: actual state of the Hipermoulding project", TS Report 41, 34-37 (2006), (in Polish).
• [15] www.myb20.com/myb2ous/ReverseEngineering/Tools/Process/10618.htm reverse Reverse Engineering- Technologies for Reverse Engineering (2001).
• [16] T. Będza and B. Dybała, "Applications of many methods of reverse engineering in measurements of difficult objects", Production Engineering, 517-524 (2006).
• [17] Rapid Prototype Tooling, Prospekt HEK GmbH, 2000.
• [18] R. Ścigała, B. Dybała, R.Będziński and, E. Chlebus, "Rapid prototyping techniques and rapid tooling in technics and medicine", Acta of Bioengineering and Biomechanics 1 (1), (1999).
• [19] www.mcp-group.de