Natural frequencies of tuned and mistuned bladed discs on a shaft

• Autorzy: Rządkowski R. , Drewczyński M. , Kubitz L.
• Języki publikacji: EN

Abstrakty

EN

The dynamic behaviour of a rotor consisting of two tuned and mistuned bladed discs on a solid shaft is considered. The effect of the shaft's flexibility on the dynamic characteristics of the bladed discs and the coupling effects between the shaft and bladed disc modes are investigated. Results show clearly the coupling effects in a bladed disc-shaft system. Interference diagrams are developed, from which the dynamic behaviour of a bladed disc can be predicted for varying flexibility relationships between solid shafts and bladed discs. The global rotating mode shapes of flexible tuned and mistuned bladed disc-shaft assemblies are calculated. Rotational effects, such as centrifugal stiffening, are accounted for and all the possible couplings between the flexible parts are allowed. Calculated natural frequencies obtained from the blade, the bladed disc and the shaft with two discs are checked to discover resonance conditions and coupling effects. It is shown that blade mistuning strongly affects the interaction between flexible bladed discs and a flexible shaft. This interaction affects the flexible bladed disc modes and is not restricted to the modes with zero, one and two nodal diameters. The torsional frequency of the shaft with two bladed discs is coupled with the zero nodal diameter modes of the single bladed discs. It is shown that including the shaft in the bladed discs model is important from the designer's point of view and may alter the spectrum of frequencies considerably.

Słowa kluczowe

EN

bladed disc; blade; mistuning

• Wydawca: Politechnika Gdańska
• Czasopismo: TASK Quarterly : scientific bulletin of Academic Computer Centre in Gdansk
• Rocznik: 2006
• Tom: Vol. 10, No 3
• Strony: 275--289
• Opis fizyczny: Bibliogr. 27 poz., rys.

Twórcy

autor

Rządkowski R.

autor

Drewczyński M.

autor

Kubitz L.

• Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14, 80-952 Gdansk, Poland,

Bibliografia

• [1] Berger Hand Kulig T S 1981 Simulation Models for Calculating the Torsional Vibrations of Large Turbine-Generator Units after Electrical System Faults, Springer-Verlag, pp. 237-245
• [2] Chivens D R and Nelson H D 1975 J. Eng. Industry 97 881
• [3] Rządkowski R 1998 Dynamics of Rotor Steam Turbine Rotor Blading, Part Two, Bladed Discs, Vol. 22, Ossolineum, Wroclaw
• [4] Dubigeon Sand Michon J C 1986 J. Sound and Vibration 106 (1) 53
• [5] Huang S C and Ho K B 1996 Trans. of the ASME 118 100
• [6] Jacquet-Richardet G, Ferraris G and Rieutord P 1996 J. Sound and Vibration 191 (5) 901
• [7] Kanki Hand Yammamoto Y 1989 Proc. of 12th Biennial ASME Conf. on Mechanical Vibration and Noise, Montreal, Canada, DE 18 (1) pp. 17-21
• [8] Khader Nand Masoud S 1991 J. Sound and Vibration 149 (3) 471
• [9] Wagner J T 1967 ASME J. Eng. Power 89 502
• [10] Dye R C F and Henry T A 1969 ASME J. Eng. Power 91 182
• [11] Ewins D J 1969 J. Sound and Vibration 9 65
• [12] El-Bayoumy L E and Srinivasan A V 1975 AIA A J. 13 460
• [13] Irretier H 1983 Vibrations of Bladed Disk Assemblies, ASME, New York, pp. 115-125
• [14] Rządkowski R 1994 J. Sound and Vibration 173 (3) 395
• [15] Rządkowski R 1994 J. Sound and Vibration 173 (3) 402
• [16] Rządkowski R 1996 J. Sound and Vibration 190 (4) 629
• [17] Wei S T and Pierre C 1988 ASME J. Vib., Acoust., Stress, Reliab. Des. 110 429
• [18] Wei S T and Pierre C 1983 ASME J. Vib., Acoust., Stress, Reliab. Des. 110 439
• [19] Dugundji J and Bundas D J 1983 AIAA J. 22 1652
• [20] Kaza K Rand Kielb R E 1984 AIAA J. 22 1618
• [21] Valero N A and Bendiksen 0 0 1985 30th Int. Gas Turbine Conf. and Exh., Houston, Texas, ASME Pap. 85-GT-115
• [22] Crawley E F and Hall K C 1985 J. Eng. Gas Turbine and Power 107 418
• [23] Khader Nand Loewy R G 1989 Gas Turbine and Aeroengine Congress and Expos., Toronto, Canada, ASME Pap. 89-GT-330
• [24] Gnesin V and Rządkowski R 2001 Vibracii v Tekhnikie i Tekhnologiakh 4 (20) 107
• [25] Rządkowski Rand Kovalov A 2003 Trans. of the Inst. of Fluid-Flow Mach. 112 139
• [26] Crawley E F 1983 J. of Eng. Power 105 585
• [27] Rządkowski R, Kwapisz L, Sokołowski J, Karpiuk R, Ostowski P and Radulski W 2003 ISCORMA-2, Gdansk, pp. 381-392