Direct torque control of doubly fed induction machine

• Autorzy: Bonnet F. , Vidal P.E. , Pietrzak-David M.
• Języki publikacji: EN

Abstrakty

EN

This paper presents novel biconverter structure to supply the Doubly Fed Induction Machine (DFIM). Two Voltage Source Inverters (VSI) feed the stator and rotor windings. The outputs of two VSI are combined electromechanically in the machine and, as a result, novel features can be obtained. For example, for high power drive applications, this configuration use two inverters dimensioned for a half of the OFIM power. A new Dual-Direct Torque Control scheme is developed with flux model of DFIM. Two Switching Tables (ST) linked to VSI are defined for stator and rotor flux vector control. Experimental and simulation results confirm good dynamic behaviour in the four quadrants of the speed-torque plane. Moreover, experimental results show the correct flux vector control behaviour and speed tracking performances.

Słowa kluczowe

EN

direct torque control; doubly fed induction machine; switching tables; voltage source inverters; flux model

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2006
• Tom: Vol. 54, nr 3
• Strony: 307--314
• Opis fizyczny: Bibliogr. 8 poz., 17 rys., 2 tab.

Twórcy

autor

Bonnet F.

autor

Vidal P.E.

autor

Pietrzak-David M.

• Laboratoire d'Electrotechnique et d'Electronique Industrielle, Institut National Polytechnique, Toulouse Cedex, 31071 France,

Bibliografia

• [1] W. Leonhard, Control of Electrical Drives, Berlin: Springer-Verlag, 1996.
• [2] M.P. Kaźmierkowski and H. Tunia, Control of Converter-Fed Driver, Amsterdam: Elsevier-PWN, 1994.
• [3] Y. Kawabata, E. Ejiogu, and T. Kawabata, “Vector controlled double inverter fed wound rotor induction motor suitable for high power drives”, IEEE Trans. Industry Appl. 35 (5), 1058–1066 (1999).
• [4] G.S. Buja and M.P. Ka´zmierkowski, “Direct torque control of pwm inverter-fed ac motor – a survey,” IEEE Trans. on Industrial Electronics 51 (4), (2004).
• [5] J.P. Caron and J.P. Hautier, Modélisation et Commande de la Machine Asynchrone, Editions Technip, Paris 1995.
• [6] F. Bonnet, P. Vidal, and M. Pietrzak-David, “Adaptive variable structure control of a doubly fed induction machine”, Proc. of Int. Conf. Pelincec, Warsaw, on CD (2005).
• [7] A.M. Arcker, “Contrôle direct du couple electromagnetique de machines asynchrones de grande puissance”, Ph.D. Dissertation, Institut National Polytechnique de Toulouse, Enseeiht, Toulouse, 1999.
• [8] P.E. Vidal and M. Pietrzak-David, “Stator flux oriented control of a doubly fed induction machine”, Proc. EPE, Toulouse, on CD (2003).