PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Rozwój technik sporządzania gazowych mieszanin wzorcowych

Identyfikatory
Warianty tytułu
EN
Development of techniques of generation gaseous standard mixtures
Języki publikacji
PL
Abstrakty
PL
Różnego typu materiały odniesienia są wykorzystywane na coraz szerszą skalę w badaniach analitycznych. Jest to bezpośrednio związane z wymogiem oceny i kontroli jakości wyników pomiarowych, tak aby mogły one stanowić źródła wiarygodnych informacji analitycznych. Materiały odniesienia są niezbędnym narzędziem w trakcie opracowywania i walidacji nowych metodyk analitycznych. Bardzo często też stanowią przedmiot różnego rodzaju badań międzylaboratoryjnych. Ich stosowanie pozwala również na zachowanie spójności pomiarowej. Coraz szersza jest oferta dostępnych materiałów odniesienia zawierających anality w matrycach stałych i ciekłych. Problemem jest natomiast dostępność do gazowych materiałów odniesienia. Wynika to przede wszystkim z trudności w zachowaniu trwałości materiałów tego typu. Z tego to powodu nie wszystkie dostępne techniki sporządzania gazowych mieszanin wzorcowych mogą być wykorzystywane przy wytwarzaniu odpowiednich bezmatrycowych gazowych materiałów odniesienia. W pracy przedstawiono: klasyfikację znanych technik sporządzania gazowych mieszanin wzorcowych, techniki najszerzej wykorzystywane wraz z przedstawieniem schematów odpowiednich zestawów aparaturowych. Przedstawiono również informacje na temat nowego podejścia do zagadnienia sporządzania gazowych mieszanin wzorcowych. W tym przypadku strumień składnika mierzonego (analitu) jest otrzymywany w procesie termicznego rozkładu związków powierzchniowych powstałych w trakcie procesu chemicznej modyfikacji powierzchni odpowiedniego stałego nośnika.
EN
Different types of reference materials (RMs) are widely used in analytical researches. It's connected with the requirement of assessment and quality control of measurement results, to make them reliable source of analytical information. RMs are indispensable tool during data handling and validation of new analytical techniques. They are also widely used in different types of interlaboratory comparisons. Moreover, using them is a tool for keeping traceability. Available offers of RMs containing analytes in solid and liquid matrixes get-ting wider and wider. Bur there is still a problem to find suitable gaseous standard mixtu-res. lt's connected with some problems with stability of this kind of reference materials. Because of this not every single technique of generating gaseous standard mixtures can be used for producing suitable, matrix free-reference materials. Information showed in this article apply to: - classification of known techniques of producing gaseous standard mixtures - characteristic of the widest utilizing techniques with appropriate schemes of suitable apparatus. Besides that there are also information about new technique of generating gaseous standard based on thermal decomposition of appropriate surface compounds.
Rocznik
Strony
49--84
Opis fizyczny
Bibliogr. 126 poz., 9 rys., 8 tab.
Twórcy
autor
  • Katedra Chemii Analitycznej, Wydział Chemiczny, Politechnika Gdańska, ul. G. Naru-towicza 11/12, 80-952 Gdańsk, tel. 058 347 10 10, fax 0583472694, chemanal@pg.gda.pl
Bibliografia
  • [1] Hedrich M. i Heine H.J.: Gaseous Reference Materials - A Chalenge in Preparation and Stability. Spec. Publ. - R. Soc. Chem., 1999,238, 115-126.
  • [2] Namieśnik J i Zygmunt B.: Role of reference materials in analysis of environmental pollutants. Sci. Total. Environ., 1999,228,243-257.
  • [3] Namieśnik J i Zygmunt B.: Reference materials in environmental trace organic analysis. Accred. Qual. Assur., 2000,5,191-197.
  • [4] Jerzak B.: Racjonalne stosowanie materiałów odniesienia. Analityka, 2003, 4, 40-42.
  • [5] Namieśnik J i Górecki T.: Quality of Analytical Results. Rev. Roum. Chim., 2001, 46, 953-962.
  • [6] Cuadros-Rodriguez L., Gamiz-Gracia L., Almansa-López E. i Laso-Sanchez J.: Calibration in chemical Measurement processes. II. A methodological approach. Trends Anal. Chem., 2001, 20, 620-636.
  • [7] Quevauviller Ph. i Donard O.F.X.: Stated references for ensuring traceability of chemical measurements for long-term environmental monitoring. Trends Anal. Chem., 2001, 20, 600-613.
  • [8] ISO guide 30. Trends and definitions used in connections with reference materials. ISO, Geneva (1992).
  • [9] Konieczka P., Namieśnik J., Zygmunt B., Bulska E., Świtaj-Zawadka A., Naganowska A., Kremer E. i Rompa M.: Ocena i kontrola jakości wyników analitycznych. CEEAM, Gdańsk 2004.
  • [10] Brown R.H., Curtis M., Saunders KJ. i Vandendriessche S. (red.): Clean Air at Wark New Trends in Assessment and Measurement for the 19905. Royal Society of Chemistry, Cambridge, UK 1992.
  • [11] Namieśnik l, Górecki T., Kozdroń B. i Torres L: Determination of Selected Organicpollutants in Indoor Air Using Permeation Passive Samplers. Intern. J. Environ. Anal. Chem., 1989, 37, 139-147.
  • [12] Namieśnik l: Zagęszczanie lotnych organicznych zanieczyszczeń atmosfery. Zesz. Nauk. Politechniki Gdańskiej, Chemia 28, Gdańsk 1985.
  • [13] Namieśnik J.: Generation of standard gaseous mixtures. J. Chromatogr., 1984, 300, 79-108.
  • [14] Namieśnik J. (red.): Kontrola chemiczna zanieczyszczeń środowiska (in Polish). Skrypt Politechniki Gdańskiej, Gdańsk 1994.
  • [15] King B.: The selection and use of reference materials - a basic guide for laboratories and accreditation bodies. Accred. Qual. Assur., 2003, 8, 429-433.
  • [16] Morris C., Berkley R. i Bumgarner J.: Preparation of multicomponent volatile organic standards using static dilution bottles. Anal. Leners, 1983, 16, 1585-1593.
  • [17] Rhoderick G.C. i Zieliński jr. W.L: Preparation of accurate multicomponent gas standards of volatile toxic organic compounds in the low-parts-per-billion range. Anal. Chem., 1988, 60 b, 2454-2460.
  • [18] Namieśnik J. (red.): Metody instrumentalne w kontroli chemicznych zanieczyszczeń środowiska. Skrypt Politechniki Gdańskiej, Gdańsk 1992.
  • [19] Namieśnik J., Jamrógiewicz Z., Pilarczyk M. i Torres L.: przygotowanie próbek środowiskowych do analizy. Chem. Inż. Ekol., 1997, 3(SI), 3-128.
  • [20] Gorlo D.: Nowe zastosowania analityczne techniki mikroekstrakcji do fazy stacjonarnej. Praca doktorska. Wydział Chemiczny, Politechnika Gdańska, Gdańsk 1998.
  • [21] Bonate P.L.: Le-GC, Concepts in Calibration Theory, Part III: Weighted Least-Squares Regression. 1992,10,310.
  • [22] Kalivas 1.H. i Suter J.M.: Generalized Simulated Annealing for Calibration Sample Selelction From an Existing Set and Orthogonalization of Undesigned Experiments. J. Chemom., 1991, 5, 37-48.
  • [23] Cowper CJ. i DcRose AJ.: Chromatograficzna analiza gazów. WNT, Warszawa 1988.
  • [24] Konieczka P.: Kalibracja jako etap procedury analitycznej. Chem. Inż. Ekol., 1997, 4, 37-47.
  • [25] Danzer K, Matthias O. i Currie L.A.: Guidelines for calibration in analytical chemistry. Part 2: Multicomponent calibration (IUPAC Technical Report). Pure Appl. Chem., 2004, 76, 1215¬-1225.
  • [26] Caroli S., Forte G. i lamiceli A.L.: ICP-AES and ICP-MS Quantification of Trace Elements in the Ma-rine Macroalga Fucus sample, a New Candidate Certified Reference Material. Microchem. J., 1999, 62(2), 244-250.
  • [27] Ross A. Sutherland i Filip M.G.: Determination of Al, Cu, Fe, Mn, Pb and Zn in certified reference materials using the optimized BCR sequential extraction procedure. Tack; Anal. Chim. Acta, 2002, 454(2), 249-257.
  • [28] Caroli S., Senofonte O., Caimi S., Robouch P., Pauwels J. i Kramer G.N.: Certified Reference Materials for Research in Antarctica: The Case of Marine Sediment. Microchem. J., 1988, 59(1), 136- 143.
  • [29] Dybczyński R., Danko B. i Polkowska-Motrenko H.: Some difficult problems, still existing in the prepa¬ration and certification of CRMs. Fresenius J. Anal. Chem., 2001, 370, 126-130.
  • [30] Dybczyński R., Danko B. i Polkowska-Motrenko H.: NAA study on homogeneity of reference materials and their suitability for microanalytical techniques. J. Radioanal. Nucl. Chem., 2000, 245, 97-104.
  • [31] Dybczyński R., Polkowska-Motrenko H., Samczyński Z. i Szopa Z.: Virginia Tobacco Leaves (CTA-VTL-2) - New Polish CRM for Inorganic Trace Analysis Including Microanalysis. Fresenius J. Anal. Chem., 1998, 360, 384-387.
  • [32] http://www.nist.gov/
  • [33] Barratt R.S.: The preparation of standard gas mixtures. A review. Analyst, 1981, 106, 817-849.
  • [34] Namieśnik J. i Przyk E.: Kierunki rozwojowe w zakresie sporządzania gazowych mieszanin wzorcowych. Chem. Inż. Ekol., 1999, 6, 289-300.
  • [35] Szulc J. i Witkiewicz Z.: Wytwarzanie niskich stężeń par w gazach do wzorcowania detektorów. Chem. Anal., 1981, 26, 375-387.
  • [36] Muniak W. Witkiewicz Z., Woryna E., Kusińska E., Twardowski A. i Goca B.: Preparation of standard gaseous mixtures by a manometric method using the Benedict-Webb-Rubin equation. J. Chromatogr., 1988,436,323-327.
  • [37] Fizykochemiczne metody kontroli zanieczyszczeń środowiska, praca zbiorowa pod redakcją J. Namieśnika i Z. Jamrógiewicza. WNT, Warszawa 1998.
  • [38J Denyszyn RB. i Sassaman T.: Parts-Per-Billion Gaseous Mixtures: A New Challenge. ASTM, STP, 1987,957, 101-109.
  • [39] Miller J.A, Grubaugh KW. i Jordon LM.: Analysis of stack gases using a portable gas chromatographic sampling and analyzing system. Environ. Sci. Technol., 1980, 14(1), 97-100.
  • [40] Rhoderick G.c.: Development of gas standards from solid 1,4-dichlorobenzene. J. Chromatogr. A, 1995, 710(1), 229-235.
  • [41] Rhoderick G.C. i Fresenius J.: Development of fifteen component hydrocarbon gas standard reference material at 5nmol/mol in nitrogen. Anal. Chem., 1997, 359. 477-483.
  • [42] Gerboles M., Diaz E. i Noriega-Guerra A.: Uncertainty calculation and implementation of the static volumetric method for the preparation of NO and S02 standard gas mixtures. Accred. Qual. Assur. 1998, 2, 69-78.
  • [43] Lucero D.P.: Ultra low-level calibration gas generation by multistage dilution techniques. Calibration in Air Monitoring. ASTM Spec. Tech. Publ., 1976, 598, 301-319.
  • [44] Guenier J.P. i Muller J.: Sampling of gaseous pollutants. Badges: use and Comparison with activated charcoal tubes. Cah. Notes Doc., 1981, 105, 493-507.
  • [45] Morris c., Berkley R. i Bumgarner J.: Preparation of multicomponent volatile organic standard using static dilution bottles. Anal. Letters, 1983, 16, 1585-1593.
  • [46] Wright R.S. i Murdoch R.W.: Laboratory Evaluation of Gas Dilution Systems for Analyzer Calibration and Calibration Gas Analysis. Air & Waste, 1994, 44, 428-430.
  • [47] Namieśnik l i Konieczka P.: Sporządzanie gazowych mieszanin wzorcowych technika autorozcieńcza-nia. Chem. Anal., 1991, 36, 356-361.
  • [48] Namieśnik J. i Konieczka P.: Sporządzanie gazowych mieszanin wzorcowych techniką autorozcieńcza¬nia. Materiały IV Ogólnopolskiej Konferencji chromatograficznej, Lublin 04-08.09.1989, s. P-44.
  • [49] Konieczka P.: Sporządzanie gazowych mieszanin wzorcowych techniką autorozcieńczania. Praca dyplo¬mowa, Politechnika Gdańska, Gdańsk 1989.
  • [50] Frary B.D.: Multipoint calibration from one standard solution and automatic dilution of overrange samples for flame atomic absorption spectrometry. Analyst, 1998, 123(2), 233-237.
  • [51] Braun W., Peterson N.c., Bass A.M. i Kurylo M.: A vacuum ultraviolet atomic emission detector: Quan¬- titative and qualitative chromatographic analysis of typical C, N, and S containing compounds. J. Chromatogr., 1971, 55(2), 237-248.
  • [52] Ichinose M., Yasuoka T, Takano J., Mitsuzawa S. i Zimmerman P.R.: Reprinted from the Proceedings of the Faculty Science, Tokai Univerity, 1985, XX.
  • [53] Gupta lP. i Swarup G.: Alaboratory method for preparation of low concentration gas mixtures. Indian J. Technol., 1991, 29, 214-216.
  • [54] Debbrecht FJ., Daugherty D.T i Neel TM.: Nat. Bur. Stand., (U.S.) Spec. Publ., Diffusion tubes as a primary standard for OSHA-type calibration. 1979, 519, 761-769.
  • [55] Namieśnik J., Torres L, Kozłowski E. i Mathieu J.: Evaluation of the suitability of selected porous polymers for preconcentrations of volatile organic compounds. J. Chromatogr., 1981,208(2), 239-252.
  • [56] Namieśnik J., Bownik M. i Kozłowski E.: Urządzenia z przegrodami półprzepuszczalnymi do sporzą-dzania gazowych mieszanin wzorcowych. Pomiary, Automatyka, Kontrola, 1982, 28, 67-69.
  • [57] Maria P.-Ch., Gał J.-F, Balza M., Pere-Trepat E. i Tumbiolo S.: Using Thermogravimetry for Weight Loss Monitoring Permeation Tubes Used for Generation of Trace Concentration Gas Standards. Anal. Chem., 2002, 74, 305-307.
  • [58] Wedel A., Muller K.P., Ratte M. i Rudolph J.: Measurements of Volatile Organic Compounds (VOC) during POPCPRN 1994: Applying a New On-Line GC-MS-Technique. l Atmos. Chem., 1998, 31, 73-103.
  • [59] Perez Ballesta P., Baldan A. i Cancelinha J.: Atmosphere Generation System for the Preparation of Ambient Air Volatile Organic Compound Standard Mixtures. Anal. Chem., 1999,71,_2241-2245.
  • [60] Barkó G. i Hlavay J.: Development of a calibration instrument for the dynamic generation of organic vapors. Fresenius J. Anal. Chem., 1998, 360, 119-121.
  • [61] Janicki W., Wolska L, Górecki T i Namieśnik J.: Apparatus for calibration of gas chromatographic systems for thermal desrption. Chem. Anal., 1993, 38, 423-428.
  • [62] Spicer C.V., Kenny D.W., Slivon LE. i Ward G.F.: Development and Evaluation of a Rapid Multicom¬- ponent Calibration Procedure for Air Toxic analysis Using the Trace Atmospheric Gas analyzer (TAGA). Proc. APCA Annu. Meet., San Francisco, 24-26 February 1988, paper 88-150.7.
  • [63] Spinhirne J.P. i Koziel J.A.: Generation and Calibration of Standard Gas Mixtures for Volatile Fatty Acids Using Permeation Tubes and Solid-Phase Microextraction Transactions of ASAE, 2003, 46, 1639-1646.
  • [64] Kozdroń-Zabiegala B., Namieśnik 1. i Przyjazny A.: Use of passive dosimeters for evaluation of the quality of indoor and out-door air. Indoor Built. Environ., 1995,4, 189-203.
  • [65] Knopf D.: Continuous dynamic-gravimetric preparation ąf calibration gas mixtures for air pollution measurements. Accred. Qual. Assur., 2001, 6, 113-119.
  • [66] Van Merbel N.C., Hagemon J.J. i Brinkman K.A.Th.: Membrane-based sample preparation for chroma¬tography. J. Chromatogr., 1993, 634(1), 1-29.
  • [67] Goelen E., Lambrechts M., Geyskens P. i Rymen T: Development and performance cIwracteristics of a capillary dosage unit with in situ weight sensor Fir the preparation ąf known amounts ą( gaseous VOC's in Gir. Intern. 1. Environ. Anal. Chem., 1992,47, 217-225.
  • [68] McKinlej J.J. i Merriman D.C.: Permeation tube sources for internal standards in process samples. Proc. Control Qual., 1996, 8(2-3), 69-74.
  • [69] Quaß U. i Schilling M.: A new test gas generator for atmospheric trace compounds. Fresenius J. Anal. Chem., 1994, 350, 461-466.
  • [70] Balasubramanian N. i Krishnameorthy S.: Development of simple permeation device for the generation of hydrogen sulfide. Analyst, 1995, 120, 2287-2289.
  • [71] Altshuller A.P. i Cohen 1.R.: Application of Diffusion Cells to Production of Known Concentration of Gaseous Hydrocarbons. Anal. Chem., 196O, 32, 802-810.
  • [72] Gautrois M. i Koppmann R.: Diffusion technique for the production of gas standards for atmospheric measurements. 1. Chromatogr. A, 1999, 848, 239-249.
  • [73] Pitombo LR.M. i Cardoso A.A.: Standard gas mixture production based on the diffusion method. Intern. J. Environ. Anal. Chem., 1990, 39, 349-360.
  • [74] Gautrois M. i Koppmann R: Diftusion technique for the production of gas standards for atmospheric measurements. 1. Chromatogr. A, 1999, 848, 239-249.
  • [75] Eiceman G.A., Preston D., Tiano G., Rodriguez J. i Parmeter J.E.: Quantitative calibration of vapor levels of TNT, RDX, and PETN using a diffusion generator with gravimetry and ion mobility spectrome¬try Talanta, 1997, 45, 57-74.
  • [76] Tanaka H.: On-Line Generation Methods of Highly Reactive Reagents and Their Application to Flow Analyses. J. Flow. Injection Anal., 1997, 14(1), 1-14.
  • [77] Ishikawa K., Hobo T., Suzuki S. i Watabe K.: Generation of trace amounts of alkanethiol standard gases using reaction gas chronomatography. J. Chromatogr., 1984, 295, 445-452.
  • [78] Oms-Molla M.T. i Klockow D.: Generation of test atmospheres of 2,4-dinitrophenol and evaluation of sampling methods for its determination in air. Intern. J. Environ. Anal. Chem., 1996, 62, 281-288.
  • [79] Tocksteinova Z. i Opekar P.: The electrochemical generation of small amounts of hydrogen cyanide. Talanta, 1986, 33(8), 688-690.
  • [80] Ishikawa K., Watabe K., Hobo T. i Suzuki S.: Generation of trace amonut of acrolein standard gas using reaction gas chromatography, Bunseki Kagaku, 1983, 32, 321-325.
  • [81] Przyjazny A: Stable standard solutions for gas chromatographic determination of volatile thiols. J. Chromatogr., 1984, 292(1), 189-196.
  • [82] Grosjean O., Pung K., Collins J., Harrison J. i Breitung E.: Portable generator for on-site calibration of peroxyacetyl nitrate analyzers. Anal. Chem., 1984, 56, 569-573.
  • [83] Nunnermacker L.J., Dickerson RR, Pried A. i Sams R.: A New Gas-Phase Nitric Acid Calibration System. Environ. Sci. Technol., 1989, 23(1), 106-110.
  • [84] Hashimoto Y. i Tanaka S.: A new method of generation of gases at parts per million levels for prepara-tion of standard gases. Environ. Sci. Technol., 1980, 14(4), 413-416.
  • [85] Vejrosta 1. i Novak 1.: Method for the preparation of continuous streams of gaseous calibration mixtures with defined contents of standard substances. J. Chromatogr., 1979, 175, 261-267.
  • [86] Meddle D.W. i Smith A.F: Field method for the determination ąf aromatic primary amines in air. Part I. Generation of standard atmospheres of amines. Analyst, 1981, 106 (1267), 1082-1087.
  • [87] Greenhouse S. i Andrawes F: Generation of gaseous standard using exponential dilution flasks in series. Anal. Chim. Acta, 1990, 236, 221-226.
  • [88] De Souza TLe. i Laweless S.P.: Development of calibration systems for measuring total reduced sulfur and sulfur dioxide in ambient concentrations in the parts per billion range. Anal. Chem., 1976, 48, 2234-2239.
  • [89] Bruner F., Canulli C. i Possanzini M.: Coupling of permeation and exponential dilution methods for use gas chromatographic trace analysis. Anal. Chem., 1973, 45, 1970-1971.
  • [90] Fowlis I.A. i Scott RP.W.: A Vapor Dilution System for Detector Calibration. J. Chromatogr., 1963, 11, 1-10.
  • [91] Wang J.-L., Lin W.-Ch. i Chen T.-Y.: Using atmospheric CCI4 as an internal reference in gas standard preparation. Atmos. Environ., 2000, 34, 4393-4398.
  • [92] Wolska L.: Zastosowanie połączenia termiczna desorpcja-chromatografia gazowa w analityce próbek środowiskowych. Rozprawa doktorska. Wydział Chemiczny, Politechnika Gdańska, Gdańsk 1996.
  • [93] Prokopowicz M.: Gazowe mieszaniny wzorcowe sporządzane w oparciu o termiczny rozklad związków powierzchniowych. Rozprawa doktorska. Wydział Chemiczny, Politechnika Gdańska, Gdańsk 1999.
  • [94] Raymond P.W. Scott: Silica Gel and Bonded Phases, Their Production, Properties and Use in LC, John Wiley&Sons, Chichester - New York - Brisbane - Toronto - Singapore 1993.
  • [95] Unger KK: Porous Silica - its Properties and use as Support in Column Liquid Chromatography, J. Chromatogr. Library, 16, Elsevier Scientific Publishing Como., Amsterdam, chapter 2, 1979.
  • [96] Ligor M., Ścibiorek M. i Buszewski B.: New coating surfaces of fibres for solid phase microextractioln (SPME). J. Microcol. Sep., 1997, 11(5), 377-383.
  • [97] Out E.O. i Pawliszyn J.: Solid phase micro-extraction of metal ions. Mikrochim. Acta, 1993, 112, 41-46.
  • [98] Ligor M. i Buszewski B.: Determination of menthol and menthone in food and pharmaceutical products by solid-phase microextraction-gas chromatography. J. Chromatogr. A, 1999,847, 161-169.
  • [99] Zeng Z., Qiu W. i Huang Z.: Solid-Phase Microextraction Using Fused-silica Fibers Coated with Sol-Gel-Derived Hydroxy-Crown Ether. Anal. Chem., 2001, 73, 2429-2436.
  • [100] Gbatu T.P., Sutton K.L. i Caruso J.A.: Development of new SPME fibers by sol-gel technology for SPME-HPLC determination of organometals. Anal. Chim. Acta, 1999, 402, 67-79.
  • [101] Zygmunt B., Jastrzębska A. i Namieśnik J.: Solid phase microextraction - a convenient 1001 for the determination of organic pollutants in environmental matrices. Crit. Rev. Anal. Chem., 2001, 31, 1-18,
  • [102] Namieśnik l, Zygmunt B. i Jastrzębska A: Application of solid-pase microextraction for detemrmina-tion of organic vapours in gaseous matrices. J. Chromatogr. A, 2001. 885, 405-418.
  • [103] Lord H. i Pawliszyn J.: Evolution of solid-phase microextraction technology. J. Chromatogr. A, 2000, 885,153-193.
  • [104] Eisert R. i Pawliszyn J.: Automated in-lube solid phase microextraction coupled to high-performance liquid chromatography. Anal. Chem., 1998,69,3140-3147.
  • [105] Eiser R i Levsen K: Development of a prototype system for quasi-continuous analysis of organic contaminants in surface or sewage water based on in-line coupling of solid-phase microextraction to gas chromatography. J. Chromatogr., 1996, 737, 59-65.
  • [106] Motlagh S. i Pawliszyn J.: On-line of flowing samples using solid phase microextraction-gas chromatography. Anal. Chim. Acta, 1993, 284, 265-273.
  • [107] Świtaj-Zawadka A.: Badania możliwości wytwarzania bezmatrycowych materiałów odniesienia lotnych analitów. Rozprawa doktorska. Wydział Chemiczny, Politechnika Gdańska, Gdańsk 2004.
  • [108] Przyk E., Konieczka P., Szczygielska-Tao J., Teschner R, Biernat J.F. i Namiesnik J.: Use of porous glass and silica gel as support media of a surface compound for generation of analytes in gaseous standard mixtures. New method for the determination of the amount of analyte generated. J. Chroma¬togr, A, 2001, 928, 99-108.
  • [109] Konieczka P.: Influence of process parameters on the composition of gaseous standard mixtures oj n-propanethiol obtained by thermal decomposition of surface compounds. Fresenius J. Anal. Chem. 2000, 367, 132-140.
  • [110] Konieczka P.: Nowa metoda sporządzania gazowych mieszanin wzorcowych. Rozprawa doktorska, Wydział Chemiczny, Politechnika Gdańska, Gdańsk 1994
  • [111] Świtaj A., Przyk E., Szczygelska-Tao J., Wójcik l, Biernat J.F. i Namieśnik J: Applicability oj glass fiber as a support material Jor generation of gaseous standard mixtures using thernlal decomposition of the surface compound. Calibration of analytical equipment. J. Sep. Sci., 2003, 26,1057-1062.
  • [112] Przyk E., Świtaj-Zawadka A., Konieczka P., Szczygelska-Tao J., Biernat J.F. i Namieśnik J.: Thermal decomposition or surface compounds for the generation of small quantities of acetaldehyde. Calibra¬tion of a thermal desorption gas chromatography-flame ionization detection. Anal. Chim. Acta, 2003, 488, 89-96.
  • [113] Świtaj-Zawadka A., Konieczka P., Szczygelska-Tao l, Biernat lF. i Namieśnik J.: New procedure of silica gel surface modification. Preparation of gaseous standard mixtures for calibration purposes. J. Chromatogr. A, 2004, 1033, 145-151.
  • [114] Konieczka P., Makarewicz J., Lobach E., Namieśnik J. i Biernat lF.: Preparation of standard gaseous mixtures of carbon dioxide in nitrogen by thermal decomposition of surface compound. Determina¬tion f the influence of some parameters of thermal decomposition process on the Composition of the generated mixtures. Chem. Anal., 1994, 39, 179-188.
  • [115] Konieczka P., Namieśnik J., Przyjazny A., Lobach E. i Biernat J.F.: Utilization of thermal decoposition immobilized compounds for the generation of gaseous standard mixtures used in the calibration of gas analyses. Analyst, 1995,120, 2041-2046.
  • [116] Prokopowicz M., Lobach E., Namieśnik J., Biernat J.F. i Przyjazny A.: Utilization of standards gene-rated in the process of thermal decomposition chemically modified silica get for a single point calibra¬tion of a GC/FID system. Talanta, 1997, 44, 1551-1561.
  • [117] Prokopowicz M., Luboch B., Przyjazny A., Biernat J.F. i Namieśnik J.: Quartz rod coated with modified silca gel as a source of CO and CO2 for standard gaseous mixtures. JHRC, 1998, 21, 303-308.
  • [118] Prokopowicz M., Lewandowska K., Skwierawska A., Przyjazny A., Biernat J.F. i Namieśnik J.: Synthesis and characterization of modified silica gel as an intermediate in generation of gaseous standard mixtures. Chromatographia, 1997,44, 483-490.
  • [119] Konieczka P., Prokopowicz M., Skwierawska A., Przyjazny A., Biernat J.F. i Namieśnik J.: Thermat decomposition of immobilized compounds for the generation of gaseous standard mixtures containing ammonia and amines. Mikrochim. Acta, 1997, 127, 211-217.
  • [120] Konieczka P., Lobach B., Namieśnik J. i Biernat J.F.: Study of a method for the preparation of standard gas mixtures based on thermal decomposition of surface compounds. Application to isothiocy-nates. Anal. Chim. Acta, 1992,265, 127-132.
  • [121] Konieczka P., Namieśnik J. i Biernat J.F.: Generation of standard gaseous mixtures by thermal decom¬position of surface compounds. Standard mixtures of thiols. J. Chromatogr., 1991, 540, 449-455.
  • [122] Konieczka P., Wolska L., Lobach E., Namieśnik J., Przyjazny A. i Biernat J.F.: Calibration of the thermal desorption-gas chromatography-mass spectrometry system using standards generated in the process of thermal decomposition o chemically modified silica get. J. Chromatogr., 1996, 742, 175-179.
  • [123] Konieczka P., Świtaj-Zawadka A. i Namieśnik J.: Gaseous standard mixtures - the chalange of obtaining small amounts of measurand. Trends Anal. Chern., 2004, 23, 450-458.
  • [124] Prokopowicz M., Przyjazny A., Biernat J.F. i Namieśnik J.: Characterization of modified silica gel as source of ethene for standard gaseous mixtures. Microchem J. 1998, 59, 437-447.
  • [125] Konieczka P., Prokopowicz M., Zygmunt B., Biernat J.F. i Namieśnik J.: Thermal decomposition of silica based surface compounds as a source of volatile standards. A new approach to the generation of gaseous calibration mixtures. Chromatographia Supl., 2000, 51, 249-260.
  • [126] Namieśnik J., Konieczka P., Chrzanowski W. i Biernat J.F.: Trends in development of techniques of preparation of gaseous standard mixtures. Chem. Anal., 1994, 39, 245-262.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPG5-0014-0033
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.