New aspects of plastic anisotropy in materials

• Autorzy: Truszkowski W. , Kloch J.
• Języki publikacji: EN

Abstrakty

EN

Plastic anisotropy of materials can be calculated from the tensile test data following two ways: (1) by the analysis of the strain ratio [gamma] vs elongation [epsilon] relationship, or (2) by relating partial strains (epsilon w and epsilon t) due to width and thickness strains to the total elongation [epsilon]. It has been shown that when based on hyperbolic description of the funkcja(epsilon) relationship, the former method (1) makes possible the precise determination of the [gamma]0 value which constitutes the anisotropy coefficient with well defined physical meaning. The latter way (2) could be useful for determining the [gamma]0 value only in the case of the fully homogeneous deformation at the tensile test when both epsilon w(epsilon) and epsilon t(epsilon) are straightlinear functions in the whole zone of uniform elongation.

Słowa kluczowe

EN

plastic anisotropy; strain ratio; tensile test; drawability

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 1998
• Tom: Vol. 46, nr 3
• Strony: 289--300
• Opis fizyczny: Bibliogr. 27 poz., 7 rys.

Twórcy

autor

Truszkowski W.

autor

Kloch J.

• Aleksander Krupkowski Institute of Metallurgy and Materials Science, Polish Academy of Sciences, ul. Reymonta 25, 30-059 Kraków, Poland.

Bibliografia

• [1] W. Truszkowski, On the plastic anisotropy of metals defined by the strain ratio, Bull. Pol. Ac.: Tech., 15 (1967) 717-722.
• [2] W. Truszkowski, Erperimental contribution to the method of measuring the strain ratio of metals, Bull. Pol. Ac.: Tech., 15 (1967) 805-808.
• [3] W. Truszkowski, J. Król, Sur V’évaluation quantitative de lanisotropic des métaur, C.R. Acad. Sci. Paris, 269 (1969) 807-809
• [4] W. Truszkowski, J. Jarominek, Plastic anisotropy of cold rolled copper, Arch. Hutn., 14 (1969) 309-328.
• [5] W. Truszkowski, Sur le sens physique du rapport des allongements obtenu par la méthode d’extrapolation, La Metalurgia Italiana, 24 (1969) 489-493.
• [6] W. Truszkowski, J. Król, Tendance à l’anisotropie des métaur cubiques à faces centrées laminés à froid, Mém. Sci. Rev. Métallurg., 67 (1970) 201-207.
• [7] W. Truszkowski, J. Jarominek, Essai de synthèse des recherches sur l’anisotropie plastique, Mém. Sci. Rev. Métallurg., 70 (1973) 433-443.
• [8] W. Truszkowski, Zagadnienie anizotropii zgniecionych metali polikrystalicznych, Arch. Hutn., 1 (1956) 171-192.
• [9] W. Truszkowski, Z. Bojarski, Sur l’anisotropie de lacier inorydable 18/8 lamniné à froid, , Mém. Sci. Rev. Métallurg., 59 (1962) 112-118.
• [10] A. Krupkowski, S. Kawiński, The phenomenon of anisotropy in annealed polycrystallinc metals, J. Inst. Metals, 75 (1949) 869-880.
• [11] W. T. Lankford, S. C. Snyder, J. A. Bauscher, New criteria for predicting the press performance of deep drawing sheets, Trans. Am. Soc. For Metals, 42 (1950) 1197-1232.
• [12] G. Jegaden, J. Voinchet, P. Rocquet, Contribution à l’étude de la plastique des tôles, Mém. Sci. Rev. Métallurg., 59 (1962) 273-285.
• [13] J. Kuśnierz, Właściwa wartość współczynnika anizotropii, Rudy Metale, 21 (1976) 15-18.
• [14] J. Kuśnierz, Z. Jasieński, Courbe de traction et valeur propre du coefficient d’anisotropie des tôles d’aluminium, de cuivre et de laiton, Mém. Sci. Rev. Mét, 73 (1976) 485-502.
• [15] A. M. Garde, R. E. Reed-Hill, Dual analysis of longitudinal and transverse zirconium tensile stress-strain data, Special Technical Publication 551, Am. Soc, Test. Mater., (1974) 75-91.
• [16] W. Truszkowski, A. Eatkowski, A. Dziadoń, Stress-strain behaviour and microstructure of polycrystalline alpha-titanium, Proc. 2nd Risø. Intern. Symp. On Metallurgy and Mat. Science, (1981) 383-392.
• [17] R. E. Reed-Hill, W. R. Cribb, S. Monteiro, An empirical analysis of titanium stress-strain curves, Met. Trans., 4 (1973) 1011-1015.
• [18] R. E. Reed-Hill, W. R. Cribb, S. Monteiro, Concerning the analysis of tensile stress-strain data using log dσ/dεp versus logσ diagrams, Met. Trans., 4 (1973) 2665-2667.
• [19] S. Krishnamurthy, K. W. Qian, R. E. Reed-Hill, Effects of deformation twinning on the stress-strain curves of low stacking fault energy face-centered cubic alloys, Practical Applications of Quantitative Metallography, ASTM STP 839, Philadelphia, (1984) 41-64.
• [20] A. Styczyński, Z Jasieński, Zakresy odkształcenia W próbie rozciągania polikrystalicznej miedzi, Rudy Metale, 15 (1970) 309-314.
• [21] W. Truszkowski, S. Wierzbiński, Institute for Metal Research PAS, (Unpublished).
• [22] W. Truszkowski, A. Modrzejewski, J. Baczyński, Variation of the strain ratio in tensile tested (011) brass single crystals, Bull. Pol. Ac.: Tech., 37 (1989) 471-479.
• [23] W. Truszkowski, J. Kloch, The variation of strain ratio at the tensile test described by a hyperbolic function, Textures and Microstructures 26-27 (1996) 531-546.
• [24] A. Krupkowski, Anizotropia mono- I polikrystalicznego metalu o strukturze A1, Arch. Hutn., 2 (1957) 9-46.
• [25] A. Krupkowski, Przymusowe odkształcenie metalu O strukturze A1, Arch. Hutn., 3 (1958) 241-254.
• [26] A. Krupkowski, S. Cichocki, Postaciowa zmiana kryształów aluminium w próbie rozciągania, Prace Komisji Metalurg.-Odlewn PAN, Metalurgia 9 Kraków, (1969) 3-64.
• [27] W. Truszkowski, J. Kloch, Instability of strain ratio in single crystals defined by the r(ε) function, Bull. Pol. Ac.: Tech., 37 (1989) 467-470.