Explosion welding of titanium - copper bimetals

• Autorzy: Maronek M. , Gatial M. , Szulc Z. , Turna M.
• Języki publikacji: EN

Abstrakty

EN

The paper deals with explosion welding of titanium and copper in order to produce bimetals suitable for making targets used in sputtering process. Paper describes materials frequently used for target fabrication and technologies often used for their production. There are also brief characteristics of welded materials, their mechanical and other properties as well as need for their purity. A key part of the paper is devoted to explosion welding process, its description, including welding parameters, used explosives and welding procedure itself. The last part of paper deals with quality control examination of final bimetal, i. e. ultrasonic testing, mechanical testing and microstructure analysis.

Słowa kluczowe

EN

bimetal; explosion welding; copper; titanium

• Wydawca: Politechnika Gdańska
• Czasopismo: Advances in Materials Science
• Rocznik: 2007
• Tom: Vol. 7, nr 4(14)
• Strony: 89--94
• Opis fizyczny: Bibliogr. 6 poz., rys., tab.

Twórcy

autor

Maronek M.

autor

Gatial M.

autor

Szulc Z.

autor

Turna M.

• Slovak University of Technology, Faculty of Materials Science and Technology, Department of Welding, Trnava, Slovakia

Bibliografia

• 1. Turńa, M. et al.: Special methods of bimetallic target production, Strojarstvo ć.2, Media/ST, 1999, p. 54- 55
• 2. Rittner, N.M.: Sputtcred Targets and Sputtered Films. Technology and Markets, BCC, Norwalk, USA, 1999.
• 3. Hrivńak, L: Utility properties and material selection, STU Bratislava, 1988
• 4. Blahuśek, J.: Nondestructive methods for materials evaluation. NDT Bulletin 4, 1996, ć.3, p. 45 - 49
• 5. STN EN 583-1-5: Nondestructive testing. Manual testing of metal sheets by ultrasonic energy.
• 6. Mićian, M.: Electric arc and its thermal influence on weld material. Strojarstvo. 4/2006, s. 2-3.