Glow discharge assisted oxynitriding of titanium alloys

• Autorzy: Sobiecki J.R. , Skołek E. , Wierzchoń T.
• Języki publikacji: EN

Abstrakty

EN

The paper presents the results of glow discharge assisted oxynitriding of titanium alloys Ti 1 A1 I Mn and Ti6Al2Cr2Mo carried out in the N2 +air atmosphere. The oxynitrided diffusion layer is thus produced of the Ti(O,N) + Ti2N + aTi(N) type with a high hardness. The oxynitriding treatment does not spoil the high corrosion resistance of titanium alloys, especially when the treatment is conducted for longer times: after the 3h and 6h processes, the corrosion resistance only slightly decreased, whereas after the 12h process, when the Ti(ON) layer was the thickest, the corrosion resistance was comparable with that of- the untreated substrate. An increase of the process duration and, thus, of the thicknesses of the individual zones of the layer, increasingly increases the resistance of the layer to frictional wear.

Słowa kluczowe

EN

plasma oxynitriding; titanium alloy; corrosion resistance; wear resistance

• Wydawca: Politechnika Gdańska
• Czasopismo: Advances in Materials Science
• Rocznik: 2007
• Tom: Vol. 7, nr 3(13)
• Strony: 103--110
• Opis fizyczny: Bibliogr. 17 poz., rys.

Twórcy

autor

Sobiecki J.R.

autor

Skołek E.

autor

Wierzchoń T.

• Warsaw University of Technology, Faculty of Materials Science and Engineering Warsaw, Poland

Bibliografia

• 1. Lutering G., Williams J.G.: Titanium (Springer-Verlag) Berlin Germany 2003.
• 2. Burakowski T., Wierzchoń T.: Surface Engineering of Metals CRC Press LLC, Boca Raton New York, London, (1999).
• 3. Marciniak J.: Biomateriały Wydawnictwo Politechniki Śląskiej Gliwice 2002.
• 4. Brunette D.M., Tengvall P., Textor M., Thompson P.: Titanium in Medicine Springer Berlin 2001
• 5. Cukrowska B., Sowińska A., Zajączkowska A., Sobiecki J.R., Wierzchoń T., Czarnowska E.: Cytokine secretion during in vitro cellular interaction with titanium alloy and nitrided surface layers produced under glow discharge conditions. Annals of Transplantation vo1.9, no 1A (2004).
• 6. López M.F., Gutierrez A.,. Jimenez J.A: Surface characterization of new non-toxic titanium alloys for use as biomaterials. Surface Science 482-485 (2001).
• 7. Czarnowska E., Wierzchoń T., Maranda-Niedbała A., Kaczmarewicz E.: Improvement of titanium alloy for biomedical appliacations by nitriding and carbonitriding processes under glow discharge conditions Journal of Material Science: Materials in Medicine, 11 (2000), pp. 73-81.
• 8. Rossi S., Fedrizzi L., Bacci T., Pradelli G.: Corrosion behaviour of glow discharge nitrided titanium alloys. Corrosion Science 45 (2003).
• 9. Gokul Lakshmi S., Raman V., Rajendran N., Babi M.A.K., Arivouli D.: In vitro corrosion behaviour of plasma nitrided Ti-6A1-7Nb orthopaedic alloy in Hanks solution. Sciene and Technology of Advanced Materials 4(2003.)
• 10. Gokul Lakshmi S., Babi M.A.K., Arivouli D., Rajendran N., Tamilselvi S.: Elektrochemical behaviour and characterisation of plasma nitrided Ti-5A1-2Nb-1Ta orthopaedic alby in Hanks solution. Surface and Coatings Technology 182 (2004).
• 11. Wierzchoń T., Czarnowska E., Krupa D.: Inżynieria powierzchni w wytwarzaniu biomateriałów tytanowych Wydawnictwo Politechnika Warszawska 2004
• 12. Moskalewicz T., Zimowski S, Kitano Y., Czyrska-Filemonowicz A. Wierzchoń T.,: Microstructure and properties of the oxynitrided Ti-6A1-4V alloy Konowe Mater. 44 (2006), pp. 133-138.
• 13. Sobiecki J. R., Mróz W., Wierzchoń T.,: Wytwarzanie powłok hydroksyapatytu metodą PLD na azotowanych stopach tytanu Inżynieria Biomateriałów 34, (2004), pp. 6-8.
• 14. Czarnowska E.. Sowińska A,. Cukrowska B, Sobiecki J.R., Wierzchoń T.: Response of human osteoblast-like cells and fibroblasts to titanium alloy nitrided under glow discharge conditions, Materials Science Forum, 475-479 (2005), pp. 2415-2418.
• 15. Lelątko J., Paczkowski P., Wierzchoń I., Morawiec H.: TEM studies of the nitrided Ni-Ti surface layer Journal of Microscopy 223 (2006), pp. 234-236.
• 16. Sobiecki J.R., Wierzchoń T.: Glow discharge assisted oxynitriding of the binary Ti6Al2Cr2Mo titanium alloy Vacuum 79 (2005), pp. 203-208.
• 17. Murray J.L., Wriedt H.A, Bull of Alloy, Phase Diagrams, 8, 2, (1987), 148.