Emerging technologies for deposition of high adhesive Ti-based coatings at room temperature

• Autorzy: Lackner J.M. , Waldhauser W. , Berghauser R. , Major B. , Major R. , Major Ł.
• Języki publikacji: EN

Abstrakty

EN

Titanium-based compounds are widely spread coating materials for tribological and bio-medical applications due to their exceptionally physical and chemical properties. Recently, the trend of using temperature-sensitive materials like polymers demands new low-temperature coating techniques for protective surface finishing as well as for functionalization of the surfaces. However, till now there is a lack of industrially-scaled low-temperature vacuum coating techniques (<50 °C). This work presents the up-scaling of pulsed laser deposition (PLD) and unbalanced magnetron sputtering with au optional ion beam pretreatment step using an anode layer source to industrial-scaled processes as well as the characterization of the most decisive film properties (adhesion, structure,...) of the deposited Ti-based films on steel and polymer substrates.

Słowa kluczowe

EN

emerging vacuum coating technologies; pulsed laser deposition; anode layer source; room temperature deposition; industrial scale-up

• Wydawca: Politechnika Gdańska
• Czasopismo: Advances in Materials Science
• Rocznik: 2007
• Tom: Vol. 7, nr 3(13)
• Strony: 37--49
• Opis fizyczny: Bibliogr. 40 poz., rys.

Twórcy

autor

Lackner J.M.

autor

Waldhauser W.

autor

Berghauser R.

autor

Major B.

autor

Major R.

autor

Major Ł.

• Joanneum Research Forschungsges. mbH, Laser Center Leoben, Niklasdorf, Austria,

Bibliografia

• 1. Muenchhausen R.E., Wu X.D.: in Pulsed Laser Deposition of Thin Films, ed. by Chrisey D.B., Hubler G.K., John Wiley & Sons, New York, 1994, p. 357.
• 2. Xi X.X.: in Pulsed Laser Deposition of Thin Films, ed. by Chrisey D.B., Hubler G.K., John Wiley & Sons, New York, 1994, p. 381.
• 3. Fork D. K.: in Pulsed Laser Deposition of Thin Films, ed. by Chrisey D.B., Hubler G.K., John Wiley & Sons, New York, 1994, p. 393.
• 4. Donley M. S., Zabinski J. S.: in Pulsed Laser Deposition of Thin Films, cd. by Chrisey D.B., Hubler G.K., John Wiley & Sons, New York, 1994, p. 431.
• 5. Jordan R., Cole D., Lunney J.G., Mackay K., Givord D.: Applied Surface Science 86 (1995) 24.
• 6. Saenger K. L.: in Pulsed Laser Deposition of Thin Films, ed. by Chrisey D.B., Hubler G.K., John Wiley & Sons, New York, 1994, p. 581.
• 7. Metev S., Meteva K.: Applied Surface Science 43 (1989), p.402.
• 8. Greer J. A.: in Pulsed Laser Deposition of Thin Films, ed. by Chrisey D.B., Hubler G.K., John Wiley & Sons, New York, 1994, p. 293.
• 9. Lackner J.M., Waldhauser W., Ebner R., Stotter C., Jakopic G., Schóberl T.: BHM, 149 (2004), p. 118.
• 10. Lackner J.M.: Industrially-scaled hybrid Pulsed Laser Deposition at Room Temperature, OREKOP, Krakow, 2005.
• 11. Mann D. A.: Plasma Modifizierung von Kunststoffoberflachen zur Haftfestigkeitssteigerung von Metallschichten, IPA-IAO Forschung und Praxis, Band 189, Springer-Verlag, Berlin, 1994.
• 12. Vallon S., Brenot R., Hofrichter A., d'Drevillon B., Gheorghiu A., Senemand C., Sapieha J. E. K., L. Martinu, E. P.-Epaillard: J. Adhesion Sci. Technol. 10 (1996), p. 1313. 13. Vallon S., Hofrichter A., Guyot L., Drevillon B., Sapieha J. E. K., Martinu L., Epaillard F. P.: J. Adhesion Sci. Technol. 10 (1996), p. 1287.
• 14. Petasch W., Rauchle E., Walker M., Elsner P.: Surf. Coat. Technol. 74-75 (1995), p. 682.
• 15. Haack R.P., Smith T.: Int. J. Adhesion Adhesives, 1(1983) p. 15.
• 16. Rank R., Wuenshce T., Fahland M., Charton C., Schiller N.: 47th Annual Technical Conference Proceedings of the Society of Vacuum Coaters, 2004, p. 632.
• 17. Haefer R.A.: Oberflachen- und Dunnschicht-Technologie, Teil II: Oberflachenmodifikation durch Teilchen und Quanten, Springer-Verlag, Berlin, 1991.
• 18. Akhsakhalyan A.D., Biryutin B.A., Gaponov S.V., Gudkov A.A., Luchin V.L, Sov. Phys.-Techn. Phys. 27 (1982), p. 969.
• 19. Akhsakhalyan A.D., Biryutin B.A., Gaponov S.V., Gudkov A.A., Luchin V.L, Sov. Phys.-Techn. Phys. 27 (1982), p. 973.
• 20. Burtner D., Blacker R., Keem J., Siegfried D., Wahlin E.: 46th Annual Technical Conference Proceedings of the Society of Vacuum Coaters, 2003, p. 263.
• 21. Lackner J.M.: Surf. Coat. Technol., 200 (2005), p. 1439.
• 22. Liston E.M.: Adhes. 30 (1989), p. 199.
• 23. Nowak S., Kuttel O.M.: Mater. Sci. Form 140-142 (1993), p. 705.
• 24. Groning P., Kuttel O.M., Collaud-Coen M., Dietler G., Schlapbach L., Appl. Surf. Sci. 89 (1995), p. 83.
• 25. J.M. Burkstrand, J. Appl. Phys. 52 (1981), p. 4785.
• 26. L.J. Atanasoska, S.G. Anderson, H.M. Meyer, Z. Lin, J.H. Weaver: J. Vac. Sci. Technol. A 5 (1987), p. 3325.
• 27. Bodó P., Sundgren J.: J. Vac. Sci. Technol. A 6 (1988), p. 2396.
• 28. Akhter S., Zhou X.-L., White J.M.: Appl. Surf. Sci. 37 (1989), p. 201.
• 29. Bou M., Martin J.M., Le Mogne Th., Appl. Surf. Sci. 47 (1991), p. 149.
• 30. Zaporjtchenko V., Strunskus T., Behnke K., v. Bechtoldsheim C., Thran A., Faupel F.: Microelectr. Eng. 50 (2000), p. 465.
• 31. Lee J.H., Cho J-S., Koh S.-K., Kim D.: Thin Solid Films 449 (2004), p. 147.
• 32. Park S.K., Han J.1., Kim W.K., Kwak M.G.: Thin Solid Films 397 (2001), p. 49.
• 33. Kukla R., Hofmann D., Ickes G., Patz U.: Surf. Coat. Technol. 74-75 (1995), p. 648.
• 34. Schiller, S. Kirchhoff V., Schiller N., Morgner H.: Surf. Coat. Technol. 125 (2000), p. 354.
• 35. Ziegler J.F.: SRIM 2006 - Stopping and Range of Ions in Matter, Software Package, 2006.
• 36. Lackner J.M., Waldhauser W., Berghauser R., Ebner R., Kothleitner G.: Surf. Coat. Technol. 200 (2005), p. 387.
• 37. Lackner J.M.: Materials Science Forum 513 (2006), p. 85.
• 38. Ko D.H., Kim E.-H., Choi S.: Thin Solid Films 340 (1999), p. 13.
• 39. Petrov I., Hultman L., Helmersson U., Sundgren J.-E., Greene J.E.: Thin Solid Films 169 (1989), p. 299.
• 40. Pelleg J., Zevin L.Z., Lungo S.: Thin Solid Films 197 (1991), p. 117.