Role of innovative supply chain practices and total quality management (TQM) on performance of Indian cement manufacturing firms : an empirical study

• Autorzy: Dubey R. , Chakrabarty A.

Warianty tytułu

PL

Rola innowacyjnych praktyk w łańcuchu dostaw i zarządzania przez jakość a wydajność indyjskich przedsiębiorstw wytwarzających cement : badanie doświadczalne

• Języki publikacji: EN

Abstrakty

EN

In extremely turbulent situation when world faces major economic crisis then particularly Indian manufacturing sector had major set back. In such situation some of Indian cement sector has demonstrated healthy performance through innovative supply chain practices. In this study author conducted an empirical study to understand how innovative practices in supply chain in combination with TQM (Total Quality Management) can help firm to reduce cost and improve customer satisfaction which in turn reflect high profitability and better market share. Out of five proposed model four model is accepted and fifth model is not supported by regression analysis. The findings clearly reveal that Indian cement Industry is quite in nascent stage to adopt Innovative supply chain practices.

PL

W wyjątkowo niespokojnych czasach, kiedy świat stawia czoła poważnemu kryzysowi gospodarczemu, szczególnie indyjski sektor wytwórczy doświadczył poważnego zahamowania. Pomimo takiej sytuacji, część indyjskiego sekora cementu wykazała dobrą wydajność dzięki zastosowaniu innowacyjnych praktyk w łańcuchu dostaw. W nieniejszej pracy autor przeprowadza badanie w celu zrozumienia jak innowacyjne praktyki w łańcuchu dostaw w połączeniu z zarządzaniem przez jakość (TQM) może pomóc przedsiębiorstwu zredukować koszty i poprawić satysfakcję klienta, co z kolei znajduje odzwierciedlenie w wysokiej rentowności i większym udziale w rynku. Z pięciu zaproponowanych modeli cztery zostały zaakceptowane, a piąty model nie jest wspierany przez analizę regresji. Wyniki jasno wykazują, że przemysł indyjskiego cementu znajduje się w stanie sprzyjającym zastosowaniu innowacyjnych praktyk w łańcuchu dostaw.

Słowa kluczowe

EN

supply chain; supply chain innovation; TQM; Total Quality Management; cement industry

PL

innowacyjność łańcucha dostaw; łańcuch dostaw; TQM; zarządzanie przez jakość; przemysł cementowy

• Wydawca: Czestochowa University of Technology
• Czasopismo: Polish Journal of Management Studies
• Rocznik: 2011
• Tom: Vol. 4
• Strony: 96--119
• Opis fizyczny: Bibliogr. 64 poz., rys., tab.

Twórcy

autor

Dubey R.

autor

Chakrabarty A.

• Asian Council of Logistics Management, Kolkata,

Bibliografia

• [1] Berry, W.L.; Hill, T.; Klompmaker, J.E.; and McLaughlin, C.P. (1991), “Linking Strategy Formulation in Marketing and Operations: Em-pirical Reseach”, Journal of Operations Management, Vol.10, Iss.3, p.294-302.
• [2] Conant, J.S. and Mokwa, M.P. and Varadarajan, P.R. (1990), “Strategic Types, Distinctive Marketing Competence and Organizational Performance: A multiple Measures-Based Study”. Strategic Management Journal, Vol.11, Iss.5, p.365-383.
• [3] Evans, J.R. and Lindsay, W.M. (1996), “The Management and Control of Quality”, 3rd ed., West Publishing Co., StPaul, MN.
• [4] Geringer, M.J. and Hebert, L. (1991), “Measuring Performance of International Joint Ventures”, Journal of International Business Studies, Vol.22.Iss.2.p.249-261.
• [5] Hair, J.F.; Anderson, R.E.; Tatham, R.L. and Black, W.C. (1998), “Multivariate Data Analysis”, Upper Saddle River, New Jersey: Prentice-Hall International, Inc.
• [6] Hamel, G. (1994), “The Concept of Core Competence, in Competence-based Competition”, Gary Hamel and Aime Heene, eds., John Wiley & Sons, West Sussex, England.
• [7] Hitt, M.A. and Irelend, R.D. (1985), “Corporate Distintive Competence, Strategy, Industry and Performance”, Strategic Management Journal, Vol.6, Iss.3, p.273-293.
• [8] Li, L.X. (2000), “An Analysis of Sources of Competitiveness and Performance of Chinese Manufacturers”, International Journal of Operations and Production Management, Vol.20, Iss.3, p.299-315.
• [9] Pfeffer, J., and Salancik, G. (1978), “The external Control of Organizations”, Harper & Row, New York.
• [10] Pothukuchi, V. K.; Damanpour, F.; Coi, J.; and Seung, H.P. (2002), “National and Organizational Culture differences and International Joint Venture performance”, Journal of Business Studies, Vol. 33, No.2, p.243-265.
• [11] Selznick, P. (1957), “Leadership in Administration: a Sociological Interpretation”, Harper and Row, New York.
• [12] Skinner, W. (1969), “Manufacturing – Missing Link in Corporate Strategy”, Harvard Business Review, May-June, pp.136-145.
• [13] Tunaly, C. (1992), “Manufacturing Strategy – Plans and Business Performance”, International Journal of Operation & Production Man-agement, Vol.12, No.3, pp.4-24.
• [14] Wiklund, J. (1999), “The sustainability of the Entrepreneural Orientation – Performance Relationship” Entrenreneurship Theory and Practice, Vol.24. Iss.1, p.37-48.
• [15] http://www.businessreviewindia.in/news/manufacturing/india-soaring-high-manufacturing-sector
• [16] http://www.cmaindia.org/portal/static/DynamicFacts.aspx
• [17] http://www.scdigest.com/assets/FirstThoughts/10-12-03.php?cid=3973
• [18] Anderson, C. and Martin, M. (1995). Why employees speak to coworkers and bosses.Journal of Business Communication, 32(3), pp. 249-65.
• [19] Blackford, M. (1991), A History of Small Business in America, Twayne Publisher, New York.
• [20] Chew, S.S. Zuraidah, M.Z. (2000), Supplier Quality Assurance: The Malaysian Way, RESQUA 2000, Regional Symposium on Quality & Automation, May4th, Penang.
• [21] Crosby, Philip (1979), Quality is Free, New York, McGraw Hill.
• [22] Davidson, A. R., Chelsom, J.V., Stern, L.W., Janes, F.R. (2001), A new tool for assessing the presence of total quality, The TQM Magazine, Vol. 13 No.1, pp.12-24.
• [23] Fowler, F.J. (1998), Design and Evaluation of survey questions, Handbook of Applied Research Methods, Bickman, L. and Rog, D.J. (eds.) Sage Publications, London, pp. 343-374.
• [24] Gomes, H (1996) Quality Qoutes, ASQC Quality Press, Milwaukee.
• [25] Hong & Satit ( 2005), “The Impact of ISO 9000 Certification on Quality Management Practices in Thailand”.Journal of Industrial Technology,21(1),pp.1-6.
• [26] Ishikawa, K (1989), Introduction to quality control, JUSE Press Ltd, Tokyo.
• [27] K.M.Ho, Samuel (1999) Change for the better via ISO 9000 and TQM, Management Decision 37/4, MCB University Press, pp. 381-385.
• [28] Kearney, A.T. (1992) Total Quality- Time to Take off the Rose-Tinted Spectacles. IFS Publications, London.
• [29] Lau, H.C., Idris, M.A. (2000), The soft foundation of Critical Success Factors on TQM implementation in Malaysia, RESQUA 2000, Regional Symposium on Quality & Automation, May 4th, Penang.
• [30] Magutu et.al (2010), “Management Through Effective Information Quality Management (IQM) in Banking Services”, AJBUMA Vol.1 pp. 96-111.
• [31] Mathews, B.P., Ueno,A., Periera, L.Z., Silva, G., Kekale, T., Repka, M. (2001), Quality Training: Findings from a European Survey, The TQM Magazine, Vol. 13 No.1, pp. 61-68.
• [32] Moreno- Luzon, M.D. (1993), Can total quality management make small firms competitive? Total Quality Management, Vol. 4 No.2, pp. 165-181.
• [33] Oakland, J. S. (2001) Total Organizational Excellence: Achieving world-class performance, Oxford : Butterworth-Heinemann
• [34] Parkin, M.A. (1996) The impact of TQM in UK SMEs, Industrial Management and Data Systems, No.4, pp. 6-10.
• [35] Parast, M. M., Adams, S. G., Jones, E. C., Rao, S. S., and Raghu-Nathan, T.S. (2006). Comparing Quality Management Practices between the United States and Mexico. Quality Management Journal, 13(4), 36-49.
• [36] Philips (1995). Philips Quality - Let’s Make Things Better.Corporate Quality Bureau, Philips Electronics N.V., Eindhoven, The Netherlands.
• [37] Prescott, B.D. (1995), Creating a World Class Quality Organization, London, Kogan Page.
• [38] Porter, L.J., Parker, A.J., (1993), Total Quality Management-the critical success factors, Total Quality Management, Vol. 4 No.1, pp. 810-829.
• [39] Powell, T.C. (1995), “Total quality management as a competitive advantage: a review and empirical study”, Strategic Management Journal, Vol. 16 No. 1, pp. 15-37.
• [40] Quazi H.A. & R. Padibjo Samuel. (1998) A journey toward total quality management through ISO 9000 certification – a study on small and medium sized enterprises in Singapore, International Journal of Quality &Reliability Management, 15, pp. 489-508.
• [41] Ramirez, C., Loney, T., (1993), Baldridge award winners identify the essential activities of a successful quality practices, Quality Digest, January, pp. 38-40.
• [42] Richardson, Terry (1997), Total Quality Management, Delmar Publishers, New York.
• [43] Ross, J.E. (1994) Total Quality Management: Text and Cases Readings, 2nd Edition, Kogan Page, London.
• [44] Sanderson, Michael. (1995) Future developments in total quality management – what can we learn from the past, The TQM Magazine, 7, pp. 28-31.
• [45] Saraph, J.V., Benson, P.G., Schroeder, R.G., (1989), An instrument for measuring the critical factors of quality management, Decision Sciences, Vol. 20 No. 4, pp. 810-829.
• [46] Saunders, D.M. (1995) Four Days with Dr. Deming, Addison- Wesley Publishing Company, USA.
• [47] Saylor, J.H. (1992), TQM Field Manual, McGraw Hill, USA.
• [48] Siti Zaleha bte Omain (2000), Kajian Terhadap Pengamalan Pengurusan Penyelengaraan oleh industri terpilih di Malaysia, Unpublished Master’s thesis, Universiti Teknologi Malaysia.
• [49] SPSS Training: Introduction to SPSS v6.1 And Statistics (1996), SPSS UK Ltd.
• [50] Steve Levit (1994) Quality is Just the Beginning, Management for Total Responsiveness: New York, McGraw – Hill.
• [51] Tamimi, N., Gershon, M., (1995), A tool for assessing industry TQM practice versus Deming philosophy, Production and Inventory Management Journal, Vol. No. 1, pp. 27-32.
• [52] Tang, Victor & Bauer Roy, (1995) Beyond strategic advantage & TQM, Competitive Dominance: New York, Van Nostrand Reinhold.
• [53] Tenner, A.R. & I.J. Detoro (1992) Total Quality Managemetn: Three Steps to Continuous Improvement. Reading, MA: Addison-Wesley.
• [54] Thiagarajan, T., Zairi, M. (1998) An empirical analysis of critical factors of TQM-A proposed tool for self- assessment and benchmarking purposes,
• [55] Benchmarking for Quality Management & Technology, Vol. 5 No. 4, pp. 291-
• [56] Wilkinson, A., Redman, T., Snape, Ed (1994), What is happening in Quality Management? : Findings from an IM Survey, The TQM Magazine, Vol. 6 No.1, pp.55-58.
• [57] Wilkinson, A., Marchington, M. and Dale, B. (1992) Manufacturing More Effective TQM: Implications for the Management of Human Resources. Human Resource Management Journal, vol. 2 no. 1, 69-88.
• [58] Wolkins, D.O. (1996), Total Quality: A framework for Leadership, Productivity Press.
• [59] Woods,J.(1998), “The Six Values Of a Quality Culture”,The Quality year Book,1998 Edition.CWL Publishing Enterprises.
• [60] Yusof S.M. (1999), Development of a Framework for TQM Implementation in Small Business, Unpublished Ph.D. thesis, University of Birmingham.
• [61] Yusof, S.M. & Aspinwall, E.M. (2000) Total quality management implementation frameworks: comparison and review, Total Quality Management, Vol. 11, pp. 281-294.
• [62] Yusof, S.M. & Aspinwall, E.M. (2000) TQM implementation issues: review and case study, International Journal of Operation & Production Management, Vol. 20, pp. 144 -357.
• [63] Zairi, M., (1996), Benchmarking for best practice, Butterworth-Heinemann, Oxford.
• [64] Zhang, Z., Waszink, Ab., Wijngaard, J. (2000) An instrument for measuring TQM implementation for Chinese manufacturing companies, International Journal of Quality & Reliability Management, Vol. 17 No. 7, pp.730-755.