Surface layer modelling and diagnostic after loose solid balls treatment

• Autorzy: Stotsko Z. A. , Stefanovych T. O.
• Konferencja: "Diagnostyka Materiałów Polimerowych 2011". Międzynarodowa Konferencja Naukowo-Techniczna (1 ; 09-18.12.2011 ; Gliwice, Polska - Male (Val di Sole), Italy)
• Języki publikacji: EN

Abstrakty

EN

Purpose of this paper is development of the mathematical models of the methods of treatment with using loose solid balls. The main methods used for the theoretical research are mathematical modelling, integral calculus, fundamentals of analytic geometry, probability theory, hydraulics of multiphase flow. The main methods used for the experimental investigations were conducted by receiving diagrams of removed material depth, microhardness of the oblique slices of the treated samples, speckle interferograms of the surfaces treated with using loose solid balls. Method of mathematical modeling for treatment with using loose solid balls is developed based on the energy conception. Mathematical model is created that allows calculating the characteristics of surface quality depending on the technological modes of the treatment. It is planned developing and improving the mathematical modeling methods of the treatment with using loose solid balls in future research by extending theirs for the curvilinear treated surfaces. Practical implications has the applied software, elaborated on the models basis, that allows providing for calculations automation of the surface quality characteristics depending on the technological modes.

Słowa kluczowe

EN

manufacturing; processing; surface treatment; loose solid balls; strengthening; modelling; diagnostic

PL

produkcja; przetwórstwo; obróbka powierzchni; warstwa wierzchnia; wzmocnienie; modelowanie; diagnostyka

• Wydawca: Sieć Badawcza Łukasiewicz – Instytut Inżynierii Materiałów Polimerowych i Barwników
• Czasopismo: Przetwórstwo Tworzyw
• Rocznik: 2011
• Tom: [R.] 17, nr 6
• Strony: 529--533
• Opis fizyczny: Bibliogr. 8 poz., rys.

Twórcy

autor

Stotsko Z. A.

autor

Stefanovych T. O.

• Department of Electronic Machinebuilding, Lviv Polytechnic National University, Bandery str. 12, Lviv, 79013, Ukraine,

Bibliografia

• 1. Maslov E.N. Teoriya shlifovaniya materialov. - Moscow: Mashinostroenie, 1977. - 320 s. (in Russian)
• 2. Yascheritsyn P.I. and others Finishnaya obrabotka detaley uplotnennym potokom svobodnogo abraziva. - Minsk: Nauka i Tehnika, 1978. - 224 s. (in Russian)
• 3. Stotsko Z.A., Stefanovych T.O. Energetycha kontsepsiya protsesu strumenevoyi obrobky poverhon nezvyazanymy tverdymy tilamy // Ukrayinskiy mizhvidomchyy naukovo-tehnichnyy zbirnyk: Avtomatyzatsiya vyrobnychyh protsesiv u mashynobuduvanni ta pryladobuduvanni. - 2005. - No 39. - S. 99-104. (in Ukrainian)
• 4. Stotsko Z.A., Stefanovych T.O. Modelyuvannya protsesu strumynnoi pbrobky nezv’yazanymy tverdymy tilamy // Vseukrainskyy shchomisyachnyy naukovo-tehnichnyy i vyrobnychyy zhurnal: Mashynoznavstvo. - 2005. - No 6. - S. 31-34. (in Ukrainian)
• 5. Stotsko Z.A., Stefanovych T.O. Pobudova I doslidzhennya rozpodilu shvydkostey robochogo seredovyshcha pry strumynniy obrobtsi poverhon vyrobiv // Mizhnarodnyy zbirnyk naukovuh prats: Progresyvni tehnologii i systemy mashynobuduvannya. - 2006. - No 32. - S. 212-220. (in Ukrainian)
• 6. Z.A. Stotsko, T.O. Stefanovych Strengthening surfaces of machine components by treatment with using loose solid balls // Journal of Achievements in Materials and Manufacturing Engineering, the organ of the World academy of Materials and Manufacturing Engineering, Gliwice, Poland. - June, 2010. - Vol. 40, No 2. - P. 195-202
• 7. Z.A. Stotsko, T.O. Stefanovych Ensuring uniformity of strengthening for machine parts surfaces by shot-peening // Journal of Achievements in Materials and Manufacturing Engineering, the organ of the World academy of Materials and Manufacturing Engineering, Gliwice, Poland. - November, 2010. - Vol. 43, No 1. - P. 440-447
• 8. Z. Stotsko, T.O. Stefanovych Eksperimentalnoe issledovanie gidroabrazivnoy obrabotki // Technicka univerzita Kosice: Journal Manufacturing Engineering. - 2008. - No 1. - P. 12-13, 32. (in Russian)