A biomechanical model for a new incremental technique for tooth restoration

• Autorzy: Sarcev I.N. , Petronievic B.S. , Atanackovic T.M.
• Języki publikacji: EN

Abstrakty

EN

The objective of this study is to introduce a modified incremental technique that leads to improved marginal adaptation and to develop a mathematical model that explains the results obtained. The technique proposed is a two-step incremental technique that reduces volume of a resin that is polymerized at each step and eliminates the central point in resin, so that the stresses are additionally reduced. In the first step, the resin is placed in the cylindrical cavity with a conical dental instrument embedded in the middle of restoration. After polymerization, the conical dental instrument is removed and the conical hole is filled with the second layer of composite and polymerized. This technique is a variant of a method where singular stress point is eliminated. We modified the previous technique by introducing a conical dental instrument into the centre of the cavity. The procedure proposed was compared with the bulk and horizontal layer incremental technique. This study confirmed that the incremental type placement technique used here has better marginal adaptation than bulk technique and horizontal two-layer incremental technique although it has larger C-factor in the first step than the two-layer incremental technique. Thus, the elimination of the central point of restoration leads to better marginal adaptation. Conical shape of the cavity that is filled in the second step makes this technique easy to apply in clinical conditions. A mathematical model describing stresses in the restoration shows stress reduction as a consequence of applying the procedure proposed.

Słowa kluczowe

EN

composite resin; marginal adaptation; incremental technique

PL

kompozyt; marginalna adaptacja; technika przyrostowe

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Acta of Bioengineering and Biomechanics
• Rocznik: 2012
• Tom: Vol. 14, no. 3
• Strony: 85--91
• Opis fizyczny: Bibliogr. 25 poz., rys., tab.

Twórcy

autor

Sarcev I.N.

autor

Petronievic B.S.

autor

Atanackovic T.M.

• Clinic of Dentistry, Faculty of Medicine, University of Novi Sad, Novi Sad, Serbia,

Bibliografia

• [1] ANDERS A., PEUTZFELDT A., van DIJKEN J.W.V., Effect of power density of curing unit, exposure duration, and light guide distance on composite depth of cure, Clin. Oral. Invest., 2005, 9(2), 71–76.
• [2] ARAVAMUDHAN K., RAKOWSKI D., FAN P.L., Variation of depth cure and intensity with distance using LED curing lights, Dent. Mater., 2006, 22(11), 988–994.
• [3] ATANACKOVIC T.M., GURAN A., Theory of elasticity for scientists and engineers, Birkhauser, Boston, 2000.
• [4] BARDWELL S., DELIPERI D.N., An alternative method to reduce polymerization shrinkage in direct posterior composite restorations, J. Am. Dent. Assoc., 2002, 133(10), 1387–1398.
• [5] BRAGA R.R., BOARO L.C., KUROE T., AZEVEDO C.L., SINGER J.M., Influence of cavity dimensions and their derivatives (volume and ’C’ factor) on shrinkage stress development and microleakage of composite restorations, Dent. Mater., 2006, 22(9), 818–823.
• [6] BRAGA R.R., FERRACANE J.L., Contraction stress related to degree of conversion and reaction kinetics, J. Dent. Res., 2002, 81(2), 114–118.
• [7] CHARTON C., COLON P., PLA F., Shrinkage stress in lightcured composite resins: Influence of material and photoactivation mode, Dent. Mater., 2007, 23(8), 911–920.
• [8] CHOI K.K., RYU G.J., CHOI S.M., LEE M.J., PARK S.J., FERRACANE J.L., Effects of cavity configuration on composite restoration, Oper. Dent., 2004, 29(4), 462–469.
• [9] DAVIDSON C.L., FEILZER A.J., Polymerization shrinkage and polymerization shrinkage stress in polymer-based restoratives, J. Dent., 1997, 25(6), 435–440.
• [10] DAVIDSON C.L., DE GEE A.J., Relaxation of polymerization contraction stresses by flow in dental composites, J. Dent. Res., 1984, 63(2), 146–148.
• [11] FERRACANE J.L., Developing a more complete understanding of stresses produced in dental composites during polymerization, Dent. Mater., 2005, 21(1), 36–42.
• [12] FEILZER A.J., DE GEE A.J., DAVIDSON C.L., Setting stress in composite resin in relation to configuration of the restoration, J. Dent. Res., 1987, 66(11), 1636–1639.
• [13] HUYSMANS M.C., van der VARST P.G., LAUTENSCHLAGER E.P., MONAGHAN P., The influence of simulated clinical handling on the flexural and compressive strength of posterior composite restorative materials, Dent. Mater., 1996, 12(2), 116–120.
• [14] LINDBERG A., van DIJKEN J.W.V. HÖRSTEDT P., In vivo interfacial adaptation of class II resin composite restorations with and without a flowable resin composite liner, Clin. Oral. Invest., 2005, 9(2), 77–83.
• [15] LOGUERCIO A.D., REIS A., BALLESTER R.Y., Polymerization shrinkage: effects of constraint and filling technique in composite restorations, Dent. Mater., 2004, 20(3), 236–243.
• [16] MILEWSKI G., HILLE A., Experimental strength analysis of orthodontic extrusion of human anterior teeth, Acta of Bioengineering and Biomechanics, 2012, 14(1), 15–21.
• [17] MILEWSKI G., Numerical and experimental analysis of effort of human tooth hard tissues in terms of proper occlusal loadings, Acta of Bioengineering and Biomechanics, 2005, 7(1), 47–59.
• [18] PETROVIC Lj., DROBAC M., STOJANAC I., ATANACKOVIC T., A method of improving marginal adaptation by elimination of singular stress point in composite restorations during resin photo-polymerization, Dent. Mater., 2010, 26(5), 449–455.
• [19] PARK J., CHANG J., FERRACANE J., LEE I-B., How should composite be layered to reduce shrinkage stress: incremental or bulk filling? Dent. Mater., 2008, 24(11), 1501–1505.
• [20] PETROVIC L.M., ATANACKOVIC T.M., A model for shrinkage strain in photo polymerization of dental composites, Dent. Mater., 2008, 24(4), 556–560.
• [21] REIS A.F., GIANNINI M., AMBROSANO B.G.M., CHAN D.C.N., The effects of filling techniques and a low-viscosity composite liner on bond strength to class II cavities, J. Dent., 2003, 31(1), 59–66.
• [22] TAKAHASHI H., FINGER W.J., WEGNER K., LUTTERODT A., KOMATSU M., WÖSTMANN B., BALKENHOL M., Factors influencing marginal cavity adaptation of nanofiller containing resin composite restorations, Dent. Mater., 2010, 26(12), 1166–1175.
• [23] WU X., SUN Y., XIE W., LIU Y., SONG X., Development of novel dental nanocomposites reinforced with polyhedral oligomeric silsesquioxane (POSS), Dent. Mater., 2010, 26 (5), 456–462.
• [24] WEI Y.-J., SILIKAS N., ZHANG Z.-T., WATTS D.C., Hygroscopic dimensional changes of self-adhering and new resinmatrix composites during water sorption/desorption cycles, Dent. Mater., 2011, 27(3), 259–266.
• [25] WATTS D.C., SATTERTHWAITE J.D., Axial shrinkage-stress depends upon both C-factor and composite mass, Dent. Mater, 2008, 24(1), 1–8.