Human pelvis loading rig for static and dynamic stress analysis

• Autorzy: Zanetti E.M. , Bignardi C. , Audenino A.L.
• Języki publikacji: EN

Abstrakty

EN

This work is aimed at designing and constructing a loading rig for the synthetic hemi-pelvis; this system has been conceived with the goal of applying differently oriented articular forces in order to experimentally test the stress distribution and the stability of surgical reconstructions like, for example, hip arthroplasty or pelvic fixation. This device can be interfaced with a usual loading machine; it preserves the anatomy of the hemi-pelvis; it is simply constrained and it allows the simulation of all physiologic activities. Moreover, the visual accessibility of the peri-acetabular area has been guaranteed and this is imperative in order to be able to perform full-field analyses like a thermoelastic or photoelastic stress analysis. First experimental trials have shown a good repeatability of loading–unloading cycles (<1.2%), a low hysteresis (<2.4%) and a good dynamic behaviour (up to 10 Hz loading frequencies).

Słowa kluczowe

EN

dynamical loading; hip arthroplasty; mechanical test; pelvic fractures; pelvis; thermoelastic stress analysis

PL

ładowanie dynamiczne; staw biodrowy; test mechaniczny; złamania miednicy; miednica; analiza naprężeń termoelastycznych

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Acta of Bioengineering and Biomechanics
• Rocznik: 2012
• Tom: Vol. 14, no. 2
• Strony: 61--66
• Opis fizyczny: Bibliogr. 23 poz., rys.

Twórcy

autor

Zanetti E.M.

autor

Bignardi C.

autor

Audenino A.L.

• Dipartimento di Ingegneria Industriale, Universitŕ di Perugia, Italy,

Bibliografia

• [1] ANSI/ISA-51.1. Process Instrumentation Terminology, American National Standards Institute/ISA, The Instrumentation, Systems, and Automation Society, 1979 (R1993).
• [2] ARCHDEACON M.T., AREBI S., TOAN LE T., WIRTH R., KEBEL R., THAKORE M., Orthogonal pin construct versus parallel uniplanar pin constructs for pelvic external fixation: A biomechanical assessment of stiffness and strength, Journal of Orthopaedic Trauma, 2009, 23, 100–105.
• [3] BERGMANN G., GRAICHEN F., ROHLMANN A., Hip joint loading during walking and running, measured in two patients, J. Biomech., 1993, 26(8), 969–990.
• [4] CILINGIR A.C., UCAR V., KAZAN R., Three-dimensional anatomic finite element modelling of hemi-arthroplasty of human hip joint, Trends Biomater. Artif. Organs, 2007, 21(1), 63–72.
• [5] CRISTOFOLINI L., VICECONTI M., CAPPELLO A., TONI A., Mechanical validation of whole bone composite femur models, J. Biomech., 1996, 29, 525–535.
• [6] DALSTRA M., HUISKES R., Load transfer across the pelvic bone, J. Biomechanics, 1995, 28(6), 715–724.
• [7] DULIEU-BARTON J.M., STANLEY P., Development and application of thermoelastic stress analysis, Journal of Strain Analysis, 1998, 33, 93–104.
• [8] FINLAY J.B., BOURNE R.B., LANDSBERG R.P.D., ANDREAE P., Pelvic stresses in vitro. I. Malsizing of the endoprostheses, J. Biomechanics, 1986, 19(9), 703–714.
• [9] HARWOOD N., CUMMINGS W.M., Thermoelastic stress analysis, Hilger, New York, 1991.
• [10] KOHLES S.S., VANDERBY R. Jr, Thermographic strain analysis of the proximal canine femur, Med. Eng. Phys., 1997, 19, 262–266.
• [11] MARKOLF K.L., AMSTUTZ H.C., Compressive deformations of the acetabulum during in vitro loading, Clin. Orthop., 1983, 173, 284–292.
• [12] MASSIN P., VANDENBUSSCHE E., LANDJERIT B., AUGEREAU B., Experimental study of periacetabular deformations before and after implantation of hip prostheses, J. Biomechanics, 1996, 29(1), 53–61.
• [13] MICHAELI D.A., MURPHY S.B., HIPP J.A., Comparison of predicted and measured contact pressures in normal and dysplastic hips, Med. Eng. Phys., 1997, 19(2), 180–186.
• [14] MUELLER L.A., VOELK M., KRESS A., PITTO R.P., SCHMIDT R., An ABJS Best Paper: Progressive cancellous and cortical bone remodeling after press-fit cup fixation: a 3-year followup, Clin. Orthop. Relat. Res., 2007, 463, 213–220.
• [15] PONSON K.J., HOEK van DIJKE G.A., JOOSSE P., SNIJDERS C.J., Improvement of external fixator performance in type C pelvic ring injuries by plating of the pubic symphysis: An experimental study on 12 external fixators, Journal of Trauma-Injury Infection & Critical Care, 2002, 53, 907–913.
• [16] REFIOR H.J., SCHIDLO C., PLITZ W., HEINING S., Photoelastic and thermoelastic measurements of stress on the proximal femur before and after implantation of a hip prosthesis with retention of the femoral neck, Orthopedics, 2002, 25, 505–511.
• [17] RIES M., PUGH J., AU J.C., GURTOWSKI J., DEE R., Cortical pelvic strains with varying size hemiarthroplasty in vitro, J. Biomechanics, 1989, 22(8/9), 775–780.
• [18] RITTER M.A., GALLEY M.R., Acetabular fixation options in total hip replacements, Orthopedics, 2008, 31(9), 887–888.
• [19] SPARKS D.R., BEASON D.P., ETHERIDGE B.S., ALONSO J.E., EBERHARDT A.W., Contact pressures in the flexed hip joint during lateral trochanteric loading, Journal of Orthopaedic Research, 2005, 23, 359–366.
• [20] VANDERBY R. Jr, KOHLES S.S., Thermographic stress analysis in cortical bone, J. Biomech. Eng., 1991, 113, 418–422.
• [21] WIDMER K.-H., ZURFLUH B., MORSCHER E.W., Load transfer and fixation mode of press-fit acetabular sockets, The Journal of Arthroplasty, 2002, 17(7), 926–935.
• [22] ZANETTI E.M., MUSSO S.S., AUDENINO A.L., Thermoelastic stress analysis by means of a standard thermocamera, Experimental Techniques, 2007, 31(2), 42–50.
• [23] ZANETTI E.M., AUDENINO A., Differential thermography for experimental, full-field stress analysis of hip arthroplasty, J. Mechanics in Med. & Biol., 2010, 10(3), 515–529.