Mechanical properties of temporomandibular joint disc on the basis of porcine preparation investigations

• Autorzy: Chladek W. , Czerwik I.
• Języki publikacji: EN

Abstrakty

EN

The paper presents the results of a study on mechanical properties of porcine temporomandibular joint discs. Taking into account anatomical properties, three typical spots were selected for the investigation: the posterior, anterior and central parts of the disc. The main focus was on the influence of samples' preparation on the changes in mechanical properties. Complete undamaged discs, cylindricallycut disc samples of 5 mm in diameter as well as discs of locally broken continuity in the upper layer around the measuring zone were prepared. Periodic compression was applied during testing, by varying the force in a sawtooth control signal. The rate of increasing the force applied equalled 1 N/s with a maximum value of 3 N. Based on the stress and strain characteristics obtained, the object's rigidity, Young's modulus of the samples, and effective Young's modulus of joint discs were calculated. Results showed that the stress and strain characteristics of the discs' substance depend on sample preparation, measurement location and load history within a given number of cycles. Only the fifth load cycle may be considered as stabilized. The most rigid proved to be the posterior part of the disc, as the rigidity of the samples, of an incised disc and of a complete disc in the fifth loading cycle amounted to 117.9 N/mm, 88.8 N/mm and 87.1 N/mm, respectively. A central part of the disc exhibited the lowest rigidity, whose values for the samples, for an incised disc and for a complete disc reached 87.9 N/mm, 70.6 N/mm, and 38.7 N/mm, respectively. Excision of the samples resulted in their dehydration, which led to increased rigidity, as reflected by Young's modulus values. In the posterior part of the disc, the modulus value was 12.56 MPa, while in the anterior part and in the center, these values reached 7.25 MPa and 6.99 MPa, respectively. Excised discs also exhibited dehydration effects during examination. While loading complete discs, the lowest effective values of Young's modulus were obtained, despite the influence of the tissues adjacent to the loaded zone, counteracting deformation. The values were 4.44 MPa, 1.97 MPa and 2.99 MPa for the posterior, central and anterior parts, respectively. Present data allow the conclusion that the error introduced due to breaking the tissue continuity is greater than the error resulting from ignoring substance continuity when applying local loads to an undamaged disc. Therefore, it seems more sensible to adopt the effective Young's modulus values in numerical analyses rather than to apply the results obtained for the samples cut out of discs.

Słowa kluczowe

EN

joint disc; temporomandibular joint; rigidity; modulus of elasticity; load; preparation; samples

PL

wspólna płyta; staw skroniowy; sztywność; moduł sprężystości; obciążenia; przygotowania; próbki

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Acta of Bioengineering and Biomechanics
• Rocznik: 2008
• Tom: Vol. 10, nr 4
• Strony: 15--20
• Opis fizyczny: Bibliogr. 17 poz., rys., tab.

Twórcy

autor

Chladek W.

autor

Czerwik I.

• Department of Process Modelling and Medical Engineering, Silesian Polytechnic University, Katowice

Bibliografia

• [1] OKESON J.P., The treatment of mastication organ dysfunction and occlusion disorders, Czelej, Lublin, 2005.
• [2] TANAKA E., EIJDEN T., Biomechanical behavior of temporomandibular joint disc, Critical Reviews in Oral Biology and Medicine, 2003, 14(2), 138–150.
• [3] MOV V.C., HUISKES R., Basic Orthopaedic Biomechanice and Mechano-Biology, Lippincott Williams and Wilkins, 2005.
• [4] ZHANG M., ZHENG Y.P., MAK A.F.T., Estimating the effective Young’s modulus of soft tissues from indentation tests–nonlinear finite element analysis of effects of friction and large deformation, Medical Engineering and Physics, 1997, Vol. 19, 512–517.
• [5] DELAFARGUE A., ULM F.J., Explicit approximations of the indentation modulus of elastically orthrotropic solids for conical indenters, International Journal of Solids and Structures, 2004, 7351–7360.
• [6] FONTENOT M.G., Viscoelastic properties of human TMJ disco and disc replacement materials, Journal of Dental Research, 1985, 64–163.
• [7] CHIN L.P.Y., AKER F.D., ZARRINNIA K., The viscoelastic properties of the human temporomandibular joint disc, Journal of Oral and Maxillofacial Surgery, 1996, 54, 315–318.
• [8] TANAKA E., SHIBAGUCHI T., TANAKA M., TANNE K., Viscoelastic properties of the human temporomandibular joint disc in patients with internal derangement, Journal of Oral and Maxillofacial Surgery, 2000, 58, 997–1002.
• [9] TANNE K., TANAKA E., SAKUDA M., The elastic modulus of the temporomandibular joint disc from adult dogs, Journal of Dental Research, 1991, 70, 1545–1548.
• [10] TENG S.Y., XU Y.H., CHENG M.H., LI Y., Biomechanical properties and collagen fiber orientation of TMJ discs in dogs. Part 2. Tensile mechanical properties of the discs, Journal of Craniomandibular Disorders: Facial and Oral Pain, 1991, 5, 107–114.
• [11] BEATTY M.W., BRUNO M.J., IWASAKI L.I., NICKEL J.C., Strain rate dependent orthotropic properties of pristine and impulsively loaded porcine temporomandibular joint disc, Journal of Biomedical Materials Research, 2001, 57, 25–34.
• [12] ALLEN K.D., ATHANASIOU K.A., Viscoelastic characterization of the porcine temporomandibular joint disc under unconfined compressions, Journal of Biomechanics, 2006, 312–322.
• [13] LAI W.F.T., BOWLEY J., BURCH J.G., Evaluation of shear stress of the human temporomandibular joint disc, Journal of Orofacial Pain, 1998, 12, 153–159.
• [14] POZO R., TANAKA E., TANAKA M., OKAZAKI M., TANNE K., The regional difference of viscoelastic property of bovine temporomandibular joint disc in compressive stress–relaxation, Medical Engineering and Physics, 2002, 24, 165–171.
• [15] CHLADEK W., KRASIŃSKI A., KASPERSKI J., Krążek stawowy jako element redukujący naprężenia stykowe, Protetyka Stomatologiczna, Warszawa, 2002.
• [16] IWASAKI L.R., NICKEL J.C., MCLACHAN K.R., Relationship Between Growth Function and Stress in the Temporomandibular Joint, Science and Practice of Occlusion, Quitessence, Hong Kong, 1997, 125–37.
• [17] BEEK M., KOOLSTRA J.H., RUIJVEN L.J., EIJDEN T.M.G.J., Three-dimensional finite element analysis of the human temporomandibular joint disc, Journal of Biomechanics, 2000, 33, 307–316.