Argon-shielded hot pressing of titanium alloy Ti6Al4V powders

• Autorzy: Gronostajski Z. , Bandoła P. , Skubiszewski T.
• Języki publikacji: EN

Abstrakty

EN

The paper presents the method of the argon-shielded hot pressing of titanium alloy (Ti6A14V) powder (used in medical industry). The powders produced in the GA (gas atomization) process and in the HDH (hydride–dehydride) process were used in the experiments. A pressing process was conducted at a temperature of 800–850 °C for different lengths of time. An unoxidized sintered material, nearly as dense as a solid material and having a lamellar structure (á+â), was obtained from the titanium alloy powder produced in the HDH process.

Słowa kluczowe

EN

powders; metallurgy; titanium

PL

tytan; proszek tytanu; metalurgia

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Acta of Bioengineering and Biomechanics
• Rocznik: 2010
• Tom: Vol. 12, no. 1
• Strony: 41--46
• Opis fizyczny: Bibliogr. 16 poz., il.

Twórcy

autor

Gronostajski Z.

autor

Bandoła P.

autor

Skubiszewski T.

• Institute of Production Engineering and Autmation, Wrocław University of Technology, Poland,

Bibliografia

• [1] HENRIQUES V.A.R., BELLINATI C.E., da SILVA C.R.M., Production of Ti-6%Al-7%Nb alloy by powder metallurgy (P/M), Journal of Materials Processing Technology, 2001, 118, 212-215.
• [2] MELECHOW R., TUBIELEWICZ K., BŁASZCZUK W., Tytan i jego stopy, Wydawnictwo Politechniki Częstochowskiej, 2004.
• [3] LONG M., RACK H.J., Titanium alloys in total joint replacement-a materials science perspective, Biomaterials, 1998, 19, 1621-1639.
• [4] CZARNOWSKA E., WIERZCHOŃ T., MARANDA-NIEDBAŁA A., Properties of the surface layers on titanium alloy and their biocompatibility in vitro tests, Journal of Materials Processing Technology, 1999, 92-93, 190-194.
• [5] WANG G., ZHANG K.F., WU D.Z., WANG J.Z., YU Y.D., Superplastic forming of bellows expansion joints made of titanium alloys, Journal of Materials Processing Technology, 2006, 178, 24-28.
• [6] NIESPODZIANA K., JURCZYK K., JURCZYK M., Titanium-silica nanocomposites: preparation and characterization, Archives of Metallurgy and Materials, 2008, Vol. 53/3, 875-880.
• [7] KUBIAK K., Technologiczna plastyczność dwufazowych stopów tytanu odkształcanych na gorąco, Oficyna Wydawnicza Politechniki Rzeszowskiej, 2004.
• [8] MOISEYEV V.N., Titanium Alloys, Taylor & Francis group, 2006.
• [9] BEDNAREK S., ŁUKASZEK-SOŁEK A., SIŃCZAK J., Analysis of strain and stress in the lower forging limit of Ti-6Al-2Mo-2Cr titanium alloy, Archives of Civil and Mechanical Engineering, 2008, Vol. 8, No. 2, 13-20.
• [10] RUTKOWSKI W., Projektowanie i właściwości wyrobów spiekanych z proszków i włókien, PWN, 1977.
• [11] FUJITA T., OGAWA A., OUCHI C., TAJIMA H., Microstructure and properties of titanium alloy produced in the newly developed blended elemental powder metallurgy process, Material Science and Engineering, 1996, A213, 148-153.
• [12] KIM K.T., YANG H.C., Densification behavior of titanium alloy powder during hot pressing, Materials Science and Engineering, 2001, A313, 46-52.
• [13] DYBIEC H., Plastic consolidation of metallic powders, Archives of Metallurgy and Materials, 2007, Vol. 52/2, 161-170.
• [14] BANDOŁA P., GRONOSTAJSKI Z., SKUBISZEWSKI T., Processing of titanium and Ti6Al4V titanium alloy powder, Ores and Non-ferous Metals, R54/11, 2009.
• [15] BLACK J., HASTINGS G., Handbook of Biomaterial Properties, Springer-Verlag, 1998, 181.
• [16] BANDOŁA P., GRONOSTAJSKI Z., SKUBISZEWSKI T., Influence of cold and hot pressing on densification behaviour of titanium alloy powder Ti6Al4V, Archives of Civil and Mechanical Engineering, 2009, Vol. 9, No. 2, 47-57.