Cold forming techniques for the manufacture of steel structual sections

• Autorzy: Macdonald M. , Heiyantuduwa M. , Harrison D. K.
• Języki publikacji: EN

Słowa kluczowe

EN

cold forming; steel structural sections

PL

obróbka; stal strukturalna; formowanie; gięcie

• Wydawca: Wydawnictwo SIGMA-NOT ; Sieć Badawcza Łukasiewicz - Instytut Mechanizacji Budownictwa i Górnictwa Skalnego
• Czasopismo: Przegląd Mechaniczny
• Rocznik: 2008
• Tom: nr 2
• Strony: 40--43
• Opis fizyczny: Bibliogr. 11 poz., il.

Twórcy

autor

Macdonald M.

autor

Heiyantuduwa M.

autor

Harrison D. K.

• Glasgow Caledonian Uniwersity, School of Engineering and Computing

Bibliografia

• 1. AISI, Specification for the Design of Cold-Formed Steel Members with Commentary. American Iron and Steel Institute, Washington DC 2001 Edition, December 2001.
• 2. BS 5950 Part 5, British standards for structural use of steel work in buildings: Code of practice for design of cold formed thin gauge sections. BSI, London 1998.
• 3. ENW 1993-1-3, Eurocode 3: Design of Steel Structures, Part 1.3: Supplementary rules for cold formed thin gauge mem-bers and sheeting. Brussels, Belgium 1996.
• 4. Kato K.: A Basic Study on Cold-Roll Forming Technique. Technical Report No. 1, Nippon Kokan 1963, pp. 44 - 54.
• 5. Karren K. W., Winter G.:. Effects of Cold-Forming on Light-Gage Steel Members. Proc. ASCE J. Struct. Div., 93(ST1), 1967, pp. 433-469.
• 6. Winter G.: Effects of Cold Work on Cold Formed Steel Members. Thin-Walled Steel Structures - Their Design and Use in Buildings. Symposium at University College of Swansea, School of Engineering, 1967, pp. 119 - 136.
• 7. Heiyantuduwa M. A., Macdonald M.: Effect of Cold Forming Manufacturing Techniques on the Materiał Properties of Steel Structural Sections. 20th International Conference on Computer-Aided Productions Engineering - CAPE 2007, GlasgowUK, pp. 172- 177.
• 8. Macdonald M., Taylor G. T., Rhodes J.: The Effect of Cold Forming on the Yield Strength of Thin Gauge Steel - Hardness Test Approach. Thin-Walled Structures, Vol. 29, Nos. 1-4/1997, pp. 243-256.
• 9. Hlavacek V.: Calculation of the Increase in Yield Strength due to the Effects of Cold Work of Forming. International Association for Bridge and Structural Engineering, 11a, Sept. 1968, pp. 273-284.
• 10. Rhodes J.: Design of Cold-Formed Steel Members. Elsevier Applied Science 1991.
• 11. Karren K. W.: Corner Properties of Cold-Formed Steel Shapes. Proc. ASCE J. Struct. Div., 93(ST1), 1967, pp. 401-432.