Multi-scale modelling of heterogeneous shell structures

• Autorzy: Massart T. J. , Mercatoris B. C. N. , Piezel B. , Berke P. , Laiarinandrasana L. , Thionnet A.
• Języki publikacji: EN

Abstrakty

EN

This paper reviews multi-scale computational homogenisation frameworks for the non-linear behaviour ofheterogeneous thin planar shells. Based on a review of some of the currently available methods, a computational homogenisation scheme for shells is applied on to representative volume elements for plain weave composites. The e?ect of ?exural loading on the potential failure modes of such materials is analysed, focusing on the reinforcement-matrix delamination mechanism. The attention is next shifted toward failure localisation in masonry unit cells. Subsequently, a recently developed computational FE2solution scheme accounting for damage localisation at structural scales based on RVE computations is applied.

Słowa kluczowe

EN

thin planar shells; computational homogenisation; failure; textile reinforced composites; masonry

PL

homogenizacja obliczeniowa; awaria; kompozyty; mur ceglany

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Computer Assisted Mechanics and Engineering Sciences
• Rocznik: 2011
• Tom: Vol. 18, no. 1-2
• Strony: 53--71
• Opis fizyczny: Bibliogr. 46 poz., rys., wykr.

Twórcy

autor

Massart T. J.

autor

Mercatoris B. C. N.

autor

Piezel B.

autor

Berke P.

autor

Laiarinandrasana L.

autor

Thionnet A.

• Building, Architecture & Town Planning CP 194/2 Universit´e Libre de Bruxelles (ULB) Avenue F.D. Roosevelt 50, 1050 Brussels, Belgium,

Bibliografia

• [1] S.L. Angioni, M. Meoa, A. Foreman. A comparison of homogenization methods for 2-D woven composites Composites: Part B, 42: 181–189, 2011.
• [2] M. Ansar, W. Xinwei, Z. Chouwei. Modeling strategies of 3D woven composites: A review Composite Structures, 93: 1947–1963, 2011.
• [3] F. Armero and D. Ehrlich. Finite element methods for the multi-scale modeling of softening hinge lines in plates at failure. Computer Methods in Applied Mechanics and Engineering, 195(13–16): 1283–1324, 2006.
• [4] P. Badel, E. Vidal-Salle, E. Maire, and P. Boisse. Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale. Composites Science and Technology, 68: 2433–2440, 2008.
• [5] T. Belytschko, S. Loehnert, and J.H. Song. Multiscale aggregating discontinuities: A method for circumventing loss of material stability. International Journal for Numerical Methods in Engineering, 73(6): 869–894, 2008.
• [6] T. Belytschko and J.H. Song. Coarse-graining of multiscale crack propagation. International Journal for Numerical Methods in Engineering, 81: 537–563, 2010.
• [7] A. Bensoussan, J.L. Lions, and G. Papanicolaou. Asymptotic analysis for periodic structures. North-Holland Publishing Company, 1978.
• [8] J. Besson, G. Cailletaud, J.L. Chaboche and S. Forest M´ecanique non lin´eaire des mat´eriaux, Herm`es, 2001.
• [9] J. Besson and R. Foerch. Large scale object oriented finite element code design. Computer Methods in Applied Mechanics and Engineering, 142: 165–187, 1997.
• [10] R. de Borst, L.J. Sluys, H.B. Muhlhaus, and J. Pamin. Fundamental issues in finite element analyses of localization of deformation. Engineering Computations, 10(2): 99–121, 1993.
• [11] S. Brasile, R. Casciaro, and G. Formica. Multilevel approach for brick masonry walls – Part I: A numerical strategy for the nonlinear analysis. Computer Methods in Applied Mechanics and Engineering, 196: 4934–4951, 2007.
• [12] P. Cartraud and T. Messager. Computational homogenization of periodic beam-like structures. International Journal of Solids and Structures, 43(3–4): 686–696, 2006.
• [13] A. Cecchi and K. Sab. A homogenized Reissner-Mindlin model for orthotropic periodic plates: Application to brickwork panels. International Journal of Solids and Structures, 44(18–19): 6055–6079, 2007.
• [14] K.S. Challagulla, A. Georgiades, G.C. Saha, and A.L. Kalamkarov. Micromechanical analysis of grid-reinforced thin composite generally orthotropic shells. Composites Part B-Engineering, 39(4): 627–644, 2008.
• [15] E.W.C. Coenen, V.G. Kouznetsova, and M.G.D. Geers. Computational homogenization for heterogeneous thin sheets. International Journal for Numerical Methods in Engineering, 83(8–9): 1180–1205, 2010.
• [16] S. Daggumati, W. Van Paepegem, J. Degrieck, J. Xu, S.V. Lomov, I. Verpoest. Local damage in a 5-harness satin weave composite under static tension: Part II – Meso-FE modelling. Composites Science and Technology, 70: 1934–1941, 2010.
• [17] V.S. Deshpande, N.A. Fleck. Collapse of truss core sandwich beams in 3-point bending. International Journal of Solids and Structures, 38: 6275–6305, 2001.
• [18] F. Feyel and J.L. Chaboche. FE2 multiscale approach for modelling the elastoviscoplastic behaviour of long fiber SiC/Ti composite materials. Computer Methods in Applied Mechanics and Engineering, 183(3–4): 309–330, 2000.
• [19] A. Gasser, P. Boisse and S. Hanklar. Mechanical behaviour of dry fabric reinforcements. 3D simulations versus biaxial tests. Computational Materials Science. 17: 7–20, 2000
• [20] M.G.D. Geers, E.W.C. Coenen, and V.G. Kouznetsova. Multi-scale computational homogenization of structured thin sheets. Modelling and Simulation in Materials Science and Engineering, 15(4): S393–S404, 2007.
• [21] A. Ibrahimbegovic and D. Markovic. Strong coupling methods in multi-phase and multi-scale modeling of inelastic behavior of heterogeneous structures. Computer Methods in Applied Mechanics and Engineering, 192(28–30): 3089–3107, 2003.
• [22] D.S. Ivanov, S.V. Lomov, S.G. Ivanov, I. Verpoest. Stress distribution in outer and inner plies of textile laminates and novel boundary conditions for unit cell analysis. Composites: Part A, 41: 571–580, 2010.
• [23] H.E. Johnson, L.A. Louca, S. Mouring, A.S. Fallah. Modelling impact damage in marine composite panels International Journal of Impact Engineering, 36: 25–39, 2009.
• [24] A.L. Kalamkarov, I.V. Andrianov, and V.V. Danishevs’kyy. Asymptotic homogenization of composite materials and structures. Applied Mechanics Reviews, 62(3), 2009. Article Number: 030802.
• [25] V.G. Kouznetsova, W.A.M. Brekelmans, and F.P.T. Baaijens. An approach to micro-macro modeling of heterogeneous materials. Computational Mechanics, 27(1): 37–48, 2001.
• [26] V.G. Kouznetsova, M.G.D. Geers, and W.A.M. Brekelmans. Multi-scale second-order computational homogenization of multi-phase materials: a nested finite element solution strategy. Computer Methods in Applied Mechanics and Engineering, 193(48–51): 5525–5550, 2004.
• [27] J. Lemaitre, J.L. Chaboche M´ecanique des mat´eriaux solides, Dunod, 1985.
• [28] S.V. Lomov et al. Meso-FE modelling of textile composites : Road map, data flow and algorithms. Composites Science and Technology, 67: 1870–1891, 2007.
• [29] J. Makowski and H. Stumpf. Strain localization in stress-resultant theory of shells. Mechanics Research Communications, 25(4): 455–465, 1998.
• [30] T.J. Massart, R.H.J. Peerlings, and M.G.D. Geers. An enhanced multi-scale approach for masonry wall computations with localization of damage. International Journal for Numerical Methods in Engineering, 69(5):1022–1059, 2007.
• [31] T.J. Massart, R.H.J. Peerlings, and M.G.D. Geers Structural damage analysis of masonry walls using computational homogenization International Journal of Damage Mechanics, 16: 199–226, 2007.
• [32] B.C.N. Mercatoris, P. Bouillard, and T.J. Massart. Multi-scale detection of failure in planar masonry thin shells using computational homogenisation. Engineering Fracture Mechanics, 76(4): 479–499, 2009.
• [33] B.C.N. Mercatoris and T.J. Massart. Assessment of periodic homogenization-based multiscale computational schemes for quasi-brittle structural failure. International Journal for Multiscale Computational Engineering, 7(2): 153–170, 2009.
• [34] B.C.N. Mercatoris and T.J. Massart. A coupled two-scale computational scheme for the failure of periodic quasi-brittle thin planar shells and its application to masonry. International Journal For Numerical Methods in Engineering, 85: 1177–1206, 2011.
• [35] M. Mistler, A. Anthoine, and C. Butenweg. In-plane and out-of-plane homogenisation of masonry. Computers & Structures, 85(17–18): 1321–1330, 2007.
• [36] G. Nilakantan, M. Keefe, T.A. Bogetti, R. Adkinson, J.W. Gillespie. On the finite element analysis of woven fabric impact using multiscale modeling techniques International Journal of Solids and Structures, 47: 2300–2315, 2010.
• [37] R.H.J. Peerlings and N.A. Fleck. Computational evaluation of strain gradient elasticity constants. International Journal for Multiscale Computational Engineering, 2(4): 599–619, 2004.
• [38] B. Piezel. Comportement et analyse multi-´echelles d’un composite `a renfort tiss´e tridimensionnel. PhD Thesis, Mines ParisTech, France, 2010.
• [39] B. Piezel, L. Laiarinandrasana, E. Mansour, J. Renard, and A. Thionnet. Analyse experimentale d’un composite textile en vue d’une modelisation multi-´echelles. 16e Journ´ees Nationale sur les Composites – JNC 16, France, 2009.
• [40] R.J.M. Smit, W.A.M. Brekelmans, and H.E.H. Meijer. Prediction of the mechanical behavior of nonlinear heterogeneous systems by multi-level finite element modeling. Computer Methods in Applied Mechanics and Engineering, 155(1–2): 181–192, 1998.
• [41] P. Suquet. Elements of homogenization for inelastic solid mechanics. In: Homogenization techniques for composite media., volume 272. Springer-Verlag, Berlin, 1987.
• [42] K.I. Tserpes, G. Labeas, S. Pantelakis. Multi-scale modeling of the mechanical response of plain weave composites and cellular solids Theoretical and Applied Fracture Mechanics, 54: 172–179, 2010.
• [43] I. Verpoest and S.V. Lomov. Virtual textile composites software WiseTex: Integration with micro-mechanical, permeability and structural analysis. Composites Science and Technology, 65: 2563–2574, 2005.
• [44] P.N. Vinh, O. Lloberas-Valls, M. Stroeven, L.J. Sluys. Homogenization-based multiscale crack modelling: From micro-diffusive damage to macro-cracks Computer Methods in Applied Mechanics and Engineering, 200(9–12): 1220–1236, 2011.
• [45] H.N.G. Wadley, N.A. Fleck, A.G. Evans. Fabrication and structural performance of periodic cellular metal sandwich structures. Composites Science and Technology, 63: 2331–2343, 2003.
• [46] J. Zeman and M. ˇSejnoha. From random microstructures to representative volume elements. Modelling and Simulation in Materials Science and Engineering, 15(4): S325–S335, 2007.