Fretting Wear of Materials – Methodological Aspects of Research

• Autorzy: Kulesza E. , Dąbrowski J. R. , Sidun J. , Neyman A. , Mizera J.
• Języki publikacji: EN

Abstrakty

EN

In this article, methodical aspects of studies on material fretting wear have been presented. The results of studies conducted on a “pin on disc” type device made at the Department of Materials and Biomedical Engineering of the Bialystok University of Technology confirmed the decisive influence of the amplitude of oscillations and the load value on the course and nature of the process. At a constant value of load, the course of resistance to motion was dependent on the amplitude. Increasing the amplitude of oscillations caused a change in friction conditions: from static friction (elastic deformation of formed adhesive connections, without dislocation of cooperating elements) to kinetic friction (breaking of adhesive bridges and displacement with sliding). The increase of the load value at a constant amplitude value caused a change in the course and nature of resistance to motion from sliding friction to friction at-rest.

Słowa kluczowe

EN

material fretting; fretting wear

PL

cierność materiałów; zużycie

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2012
• Tom: Vol. 6, no. 3
• Strony: 58--61
• Opis fizyczny: Bibliogr. 16 poz., Rys.

Twórcy

autor

Kulesza E.

autor

Dąbrowski J. R.

autor

Sidun J.

autor

Neyman A.

autor

Mizera J.

• Faculty of Mechanical Engineering, Chair of Materials and Biomedical Engineering, Bialystok University of Technology, ul. Wiejska 45 C, 15-351 Bialystok, Poland,

Bibliografia

• 1. Glossary of Terms and Definitions In the Field of Friction, Wear and Lubrication, (1969) OECD Publications, Paris
• 2. Guzowski S. (2003), Analiza zuŜycia frettingowego w połączeniach wciskowych na przykładzie osi zestawów kołowych pojazdów zynowych, Wydawnictwo PK, Kraków.
• 3. Hannel S., Fouvry S., Kapsa Ph., Vincent L. (2001), The fretting sliding transition as a criterion for electrical contact performance, Wear, Vol. 249, 761-770.
• 4. Hebda M., Wachał A. (1980), Trybologia, WNT Warszawa.
• 5. Hoppner D., Chandrasekoron V. (1994), Fretting in orthopaedic implants; a review. Wear, Vol. 173, 189-197.
• 6. Neale M. J. (1995), The tribology handbook, Elsevier, Oxford.
• 7. Neyman A. (1993), Studia nad frettingiem. Wpływ struktury węzła styku na zużcie, Zeszyt Naukowy Politechniki Gdańskiej, MechanikaNo. 501, Gdańsk.
• 8. Neyman A. (2003), Fretting w elementach maszyn, Wydawnictwo PG. Gdańsk.
• 9. O`Connor J.J. (1981), The role of elastic stress analysis in the interpretation of fretting fatigue failures. In Waterhouse R.B. ed. Fretting Fatigue, London: Applied Science Publishers.
• 10. Shanshan G., Zhenbing C., Huixin Q., Minhao Z., Haiyang Y.(2010), Comparison between radial fretting and dual-motion fretting features of cortical bone, Tribology International, Vol. 43, 440-446.
• 11. Smith E.H. (1998), Mechanical Engineer’s Reference Book, Elsevier.
• 12. Tomlinson G.A. (1927) The Rusing of steel surfaces In contact. Proc. Roy. Soc. No 115A, 427.
• 13. Tristani L., Zindine E.M., Boyer L., Klimek G. (2001), Mechanical modeling of fretting cycles in electrical contacts, Wear, Vol. 249, 12-19.
• 14. Waterhouse R.B., (1972), Fretting corrosion, Pergamon Press Ltd., Oxford.
• 15. Wierzcholski K., Czajkowski A.A. (1999), Procesy zużycia biotribologicznego. Mat. Konferencyjne XXIII Jesiennej Szkoły Tribologicznej, Zielona Góra Lubiatów, Wrzesień 1999, 247-252.
• 16. Young W.P., Hyung G.J., Kang Y.L. (2010), Effect of intermittent fretting on corrosion behavior in electrical contact, Wear, Vol. 268, 353-360.