Assessment of Cutting Edge Defects Using a Vision Method

• Autorzy: Sioma A.
• Języki publikacji: EN

Abstrakty

EN

The paper discusses a vision method of assessment of laser cutting edges and surfaces of metals. It presents an analysis of the defects that occur at the edges and surfaces of components cut out in laser technology. It discusses in detail examples of defects, their causes, and methods of preventing their occurrence in the cutting process. The paper presents a vision method for the identification and assessment of defects based on selected examples. It also discusses a method of constructing a three-dimensional image of a product, issues related to the resolution of the vision system and the resolution of laser beam analysis, and methods of image analysis.

Słowa kluczowe

EN

3D vision system; image processing; surface defects; process control; quality control

PL

przetwarzanie obrazów; sterowanie; kontrola jakości

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2012
• Tom: Vol. 6, no. 1
• Strony: 57--62
• Opis fizyczny: Bibliogr. 11 poz., Wykr.

Twórcy

autor

Sioma A.

• AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics,Department of Process Control, Al. Mickiewicza 30, 30-059 Kraków, Poland,

Bibliografia

• 1. Bednarczyk J., Sioma A. (2011), Application of a visual measurement technique to the assessment of electrodynamic stamping, Solid State Phenomena; Control engineering in materials processing, Vol. 177, 1–9, 20.
• 2. Gawlik J., Ryniewicz A., Sioma A. (2004), The strategies and methods of measurement in multifunctional quality inspection, 8th International Symposium on Measurement and Quality Control in Production, Erlangen, MEASURE AND QUALITY CONTROL IN PRODUCTION Book Series: VDI BERICHTE Vol. 1860, 649-662.
• 3. Kowal J., Sioma A. (2009), Active vision system for 3D product inspection: Learn how to construct three-dimensional vision applications by reviewing the measurements procedures, Control Engineering USA, Vol. 56, 46-48.
• 4. Kowal J., Sioma A. (2010), Metoda budowy obrazu 3D produktu z wykorzystaniem systemu wizyjnego [Construction of a 3D image of a product using a vision system], Acta Mechanica et Automatica, Vol. 4. No. 1, 48–51.
• 5. Oczoś K., Liubimow V. (2003), Struktura geometryczna powierzchni [The geometric structure of surfaces], Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszów.
• 6. Pawlus P. (2006), Topografia powierzchni [Surface topography], Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszów.
• 7. Sioma A. (2010), Zastosowanie systemów wizyjnych 3D w kontroli jakości wykonania elementów pneumatyki i hydrauliki [Using 3D vision systems in the quality inspection of pneumatic and hydraulic components], Pneumatyka, No. 1, 27–30.
• 8. Sioma A. (2011a), Modelowanie i symulacja realizacji procesu technologicznego [Modelling and simulation of processes], Mechanik miesięcznik naukowo-techniczny, No. 12, 990.
• 9. Sioma A. (2011b), Projektowanie CAD z wykorzystaniem danych z systemu wizyjnego [CAD design using data from a vision system], Mechanik miesięcznik naukowo-techniczny, No. 12, 990.
• 10. Sioma A., Struzikiewicz G. (2011), Pomiary głowicy frezowej z wykorzystaniem systemu wizyjnego [Milling head measurements using a vision system], Świat Obrabiarek, No. 9-10, 8-10.
• 11. Tytko A., Sioma A. (2011,) Evaluation of the operational parameters of ropes, Solid State Phenomena, Control engineering in materials processing, Vol. 177, 125–134.