Numerical-Experimental Analysis of Plastic Flow Beginning Phase Round the Hole in the Thin Shield Under Tension

• Autorzy: Bućko S. , Jodłowski H. , Trzebicki M.
• Języki publikacji: EN

Abstrakty

EN

The method of recognition of plastic strains with the use of optical interference was characterized in the work. The idea of the method was shown on the example test for 15HM steel tension. The results of experimental testing of plastic strains initiation in the thin shield with opening of O20 diameter under tension, especially considering round the hole zone were presented in further part of the work. The experiment was carried out with the use of method mentioned above. In the experiment the stresses initializing plastic deformations and the shape of plastic zone were determined. The stress state analysis in the hole zone in the specimen under tension was realized with the use of finite element method. The calculations were done for two significantly different hole diameters. The results of FEM calculations allow for certification that for the holes of diameters significantly bigger than the shield thickness round the hole plane stress state occurs.

Słowa kluczowe

EN

plastic strain identification; optical interference; stress concentration; experimental research; FEM analysis

PL

identyfikacja odkształceń plastycznych; interferencja optyczna; koncentracja naprężeń; badania eksperymentalne; analiza MES

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2012
• Tom: Vol. 6, no. 1
• Strony: 21--25
• Opis fizyczny: Bibliogr. 9 poz., Rys.

Twórcy

autor

Bućko S.

autor

Jodłowski H.

autor

Trzebicki M.

• Institute of Applied Mechanics, Cracow University of Technology, al. Jana Pawła II 37, 30 -864 Kraków, Poland,

Bibliografia

• 1. Brzoska Z. (1972), Strength of the materials (in polish), PWN Warszawa.
• 2. Bućko S., Jodłowski H. (2006), Plastic zones formation in materials with physical plastic limits on the base of new research methods (in polish), Materiały X Krajowej Konferencji Wytrzymałości i Badania Materiałów, Kudowa Zdrój.
• 3. Bućko S., Jodłowski H. (2009), Inicjacja odkształceń w stali z wyraźną granicą plastyczności w warunkach gradientu naprężeń, Acta Mechanica et Automatica, Vol. 3, No. 1.
• 4. Durelli A. J., Parks V.J. (1970), Moire Analysis of Strain, Prentice - Hall, Englewood Cliffs, New Jersey 1970.
• 5. Howland R.C.J. (1930), On the Stresses in Neighborhood of a Circular Hole in a Strip Under Tension, Phil. Trans. Roy. Soc. (London), A, Vol. 229 (1929-30), 67.
• 6. Jodłowski H. (2007), Metoda rozpoznawania odkształceń plastycznych w procesie obciążania stali wykazująść materiałową, Praca doktorska, Politechnika Krakowska, Kraków.
• 7. Malinin N. N., Rżysko J. (1981), Mechanika materiałów, PWN Warszawa 1981.
• 8. Nadai A. (1950), Theory of flow and fracture of solids, t. I, New York 1950, McGraw-Hill.
• 9. Theocaris S., Marketos E. (1964), Elastic-plastic analysis of perforated thin strips of a strain- -hardening material, J. Mech. Phys. Solids., 11, 377 – 390.