Design, Analysis and Performance Evaluation of the Linear, Magnetorheological Damper

• Autorzy: Bajkowski J. M.
• Języki publikacji: PL

Abstrakty

EN

The paper issues the design and analysis of the linear, magnetorheological damper. Basic information concerning the characteristics of the typical magnetorheological fluid and the damper incorporating it, were presented with the short description of the applied fluid MRF-132 DG. Basing on the computations, the prototype damper T-MR SIMR 132 DG was designed, manufactured, and tested under different operating conditions. Presented calculations were verified with the experimental results and their accuracy was evaluated. The conclusions and observations from the research were compiled in the summary.

Słowa kluczowe

PL

drgania; tłumienie; MRF

EN

vibration; damping; magnetorheological fluid; MRF

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2012
• Tom: Vol. 6, no. 1
• Strony: 5--9
• Opis fizyczny: Bibliogr. 7 poz., Rys.

Twórcy

autor

Bajkowski J. M.

• The Faculty of Automotive and Construction Machinery Engineering, Institute of Vehicles, Warsaw University of Technology, ul. Narbutta 84, 00-524 Warsaw, Poland,

Bibliografia

• 1. Gavin H., Hoagg J., Dobossy M. (2001), Optimal Design of MR Device, Proc. U.S.-Japan Workshop on Smart Structures for Improved Seismic Performance in Urban Regions, Seattle, 225-236.
• 2. Kęsy Z. (2008), Sprzęgła z cieczami elektro- i magnetoreologicznymi, wyd. Politechnika Radomska, Radom
• 3. Kim J.-H., Lee Ch.-W., Jung B.-B., Park Y. (2001), Design of Magneto-Rheological Fluid Based Device, KSME International Journal, Vol. 15 No. 11, pp. 1517-1523.
• 4. Milecki A. (2010), Electro- and magneto-rheological fluids and their application in technique (in Polish), wyd. II, wyd. Politechniki Poznańskiej, Poznań, 42-60.
• 5. Mukhlis R. Z., Mohamed N., Mohd Nor M. J. (2006), The design and simulation of flow mode electrorheological damper, Jurnal Teknologi, University of Technology Malaysia , 44(A) Jun 2006, 115–125.
• 6. Poynor J. C. (2001), Innovative Designs for Magneto- Rheological Dampers, Master of Science in Mechanical Engineering degree thesis, Mehdi A., Virginia Polytechnic.
• 7. Phillips R. (1969), Engineering applications of fluids with a variable yield stress, Ph.D. Thesis, University of California, Berkeley.