Grain Size Dependence of Creep Lifetime Modeled by Means of Cellular Automata

• Autorzy: Nowak K.
• Języki publikacji: EN

Abstrakty

EN

Grain size dependence of creep is a complex relation. It can be increasing, decreasing or constant function accordingly to current conditions and material. It is a consequence of complex nature of microscopic mechanisms affecting creep. Some of them are analyzed in current paper by means of multiscale model, using simulation of damage development done by cellular automata technique. It was shown that enlarged sizes of grains, which promote development of intergranular microcracks, are compensated by reduced density of voids forming vacancies. Obtained in simulations grain size dependency follows experimentally observed dependency for small grains in dislocation creep range.

Słowa kluczowe

EN

cellular automata; creep; dependence

PL

automat komórkowy; pełzanie; zależność

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2011
• Tom: Vol. 5, no. 4
• Strony: 81--85
• Opis fizyczny: Bibliogr. 25 poz., Tab., Wykr.

Twórcy

autor

Nowak K.

• Wydział Inżynierii Lądowej, Politechnika Krakowska, Kraków,

Bibliografia

• 1. Abedrabbo N., Pourboghrat F., Carsley J. (2006), Forming of AA5182-O and AA5754-O at elevated temperatures using coupled thermo-mechanical finite element models, International Journal of Plasticity, 23, 841–875.
• 2. Bolkowski S., Stabrowski M., Skoczylas J., Sroka J., Sikora J., Wincenciak S. (1993), Komputerowe metody analizy pola elektromagnetycznego, WNT, Warszawa.
• 3. Goshima T., Hanson M.T., Keer L.M. (1990), Threedimensional analysis of thermal effects on surface crack propagation in rolling contact, Journal of Thermal Stresses, Vol. 13, 237-261.
• 4. Grześ P. (2009), Finite element analysis of disc temperature during braking process, Acta Mechanica et Automatica, Vol. 3, No. 4, 36-42.
• 5. Kaczorek T. (2002), Positive 1D and 2D Systems, Springer Verlag, London.
• 6. Malinin N. N, Rżysko J. (1981), Mechanika materiałów, PWN, Warszawa.
• 7. Belloni G., Bernasconi G., Piatti G. (1977), Creep damage and rupture in AISI 310 austenitic steel, Meccanica, Vol. 12, 84-96.
• 8. Boettner R.C., Robertson W.D. (1961), A Study of the Growth of Voids in Copper During the Creep Process by Measurement of the Accompanying Change in Density, Trans. Metall. Soc. AIME, Vol. 221, 613-622.
• 9. Chrzanowski M., Nowak K. (2007), Cellular Automata in Damage Mechanics: Brittle Creep Rupture Case, Arch. Mech., Vol. 59, 329-339.
• 10. Chrzanowski M., Nowak K. (2009), On Multiscale Modelling of Creep Damage by Means of Cellular Automata, Journal of Multiscale Modelling, Vol. 1, 389-402.
• 11. Chrzanowski M., Nowak K. (2010), Opis zniszczenia mieszanego w warunkach pełzania przy pomocy automatów komórkowych, Acta Mechanica et Automatica, Vol. 4, 29-36.
• 12. Dobrzański L.A. (1996), Metaloznawstwo z podstawami nauki o materiałach, Wydawnictwa Naukowo-Techniczne, Warszawa.
• 13. Evans H.E. (1984), Mechanisms of Creep Fracture, Elsevier Applied Science Publishers, London, New York.
• 14. Evans R.W., Wilshire B. (1993), Introduction to Creep, The Institute of Materials, London.
• 15. Feltham P., Meakin J.D. (1959), Creep in Face-Centred Cubic Metals with Special Reference to Copper, Acta Metall., Vol. 7, 614-627.
• 16. Fleck R.G., Cocks A.C.F., Taplin D.M.R. (1970), The Influence of Polycrystal Grain Size upon the Creep Ductility of Copper, Metall. Mater. Trans., Vol. 1B, 3415-3420.
• 17. Hayhurst D.R. (2005), CDM mechanisms-based modelling of tertiary creep: ability to predict the life of engineering components, Arch. Mech., Vol. 57, 2-3.
• 18. Johnson W. R., Barrett C.R., Nix W.D. (1972), The effect of environment and grain size on the creep behavior of a Ni-6 pct W solid solution, Metall. Mater. Trans., Vol. 3B, 695-698.
• 19. Lemaitre J., Dufailly J. (1987), Damage measurements, Eng. Fract. Mech., Vol. 28, 643-661.
• 20. Matic P., Geltmacher A.B. (2001), A cellular automatonbased technique for modeling mesoscale damage evolution, Comp. Mat. Sci., Vol. 20, 120-141.
• 21. Nowak K. (2011), Uncertainty of lifetime for CAFE creep damage model, Computer Methods in Materials Science, Vol. 11, 315-323.
• 22. Ostoja-Starzewski M. (2007), Microstructural Randomness and Scaling in Mechanics of Materials, Chapman and Hall/CRC.
• 23. Pahutova M., Cadek J., Rys P. (1971), High temperature creep in copper, Phil. Mag., Vol. 22, 509-517.
• 24. Wilshire B., Battenbough A.J. (2007), Creep and creep fracture of polycrystalline copper, Mater. Sci. Eng., Vol. 443A, 156-166.
• 25. Wilshire B., Palmer C.J. (2002), Grain size effects during creep of copper, Scripta Mater., Vol. 46, 483-488.