Mechanical characterization of steel for fastening in a wide range of strain rate

• Autorzy: Cadoni E. , Bragov A. M. , Dotta M. , Forni D. , Konstantinov A. , Lomunov A. , Ripamonti A.
• Języki publikacji: EN

Abstrakty

EN

In this paper, the preliminary results of the mechanical characterization in a wide range of strain rate of the 30MnB4 steel, usually adopted for fasteners, are described. In this study the di?erent issues required to implement the dynamic test results in numerical code have been analyzed. Different experimental techniques have been used for di?erent strain rates: univer- sal machine, Hydro-Pneumatic Machine, JRC-Modi?ed Hopkinson Bar and Split Hopkinson Pressure Bar. The failure at high strain rate has been examined by means of fast digital image recording systems. The material shows enhanced mechanical properties increasing the strain rate: this fact can be taken into consideration to improve the product design and the manu- facturing process. The experimental research has been developed in the DynaMat laboratory of the University of Applied Sciences of Southern Switzerland and in the Laboratory of Dy- namic Investigation of Materials in Nizhny Novgorod, in the frame of the Swiss – Russian Joint Research Program.

Słowa kluczowe

EN

steel; strain

PL

stal; odkształcenie

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Engineering Transactions
• Rocznik: 2011
• Tom: Vol. 59, iss. 2
• Strony: 101--117
• Opis fizyczny: Bibliogr. 16 poz., rys., wykr.

Twórcy

autor

Cadoni E.

autor

Bragov A. M.

autor

Dotta M.

autor

Forni D.

autor

Konstantinov A.

autor

Lomunov A.

autor

Ripamonti A.

• University of Applied Sciences of Southern Switzerland DynaMat Laboratory, Switzerland

Bibliografia

• 1. EN 10263-4: 2003. “Steel rod, bars and wire for cold heading and cold extrusion. Part 4: technical delivery conditions for steels for quenching and tempering”.
• 2. M. A. Meyers, Dynamic Behavior of Materials, Wiley Interscience, New York, 1994.
• 3. J. E. Field, Review of experimental techniques for high rate deformation and shock studies, Int. J. Imp. Eng., 30, 725–775, 2004.
• 4. G. T. Gray III, Classic Split-Hopkinson pressure bar testing, [in:] ASM Handbook, Vol. H. Kuhn, D. Medlin [Eds.], ASM Int., Materials Park Ohio 2000, pp. 462–476.
• 5. K. A. Hartley, J. Duffy, R. H. Hawley, The torsional Kolsky (Split-Hopkinson) bar, [in:] ASM Handbook, Vol. 8, H. Kuhn, D. Medlin [Eds.], ASM Int., Materials Park Ohio 1985, pp. 218–228.
• 6. S. Vaynman, M. E. Fine, S. Leeb, H. D. Espinosa, Effect of strain rate and temperature on mechanical properties and fracture mode of high strength precipitation hardened ferritic steels, Scripta Materialia, 55, 351–354, 2006.
• 7. T. Nicholas, A. M. Rajendran, Material characterization at high strain-rates, [in:] High Velocity Impact Dynamics, J.A. Zukas [Ed.], Wiley, New York 1990, pp. 127–296.
• 8. C. Albertini, M. Montagnani, Testing techniques based on the split Hopkinson bar, Institute of Physics Conference series No. 21, pp. 22–32, London, 1974.
• 9. C. Albertini, M. Montagnani, Waves propagation effects on dynamic loading, Journal NED 37, pp. 115–124, North Holland Publishing Company, 1976.
• 10. R. M. Davis, A critical study of the Hopkinson bar, Cambridge University Press, 240, 375–457, 1948.
• 11. H. Kolsky, An investigation of the mechanical properties of materials at very high rates of loading, Proc. Phys. Soc. Sect. B62, 676–700, 1949.
• 12. U. S. Lindholm, High strain rate tests, Techniques of metal research, J. Wiley [Ed.], 5, 1, 1971.
• 13. A. M. Bragov, P. V. Demenko, A. K. Lomunov, I. V. Sergeichev, L. Kruszka, Investigation of behaviour of materials of different physical nature using the Kolsky method and its modifications, New Experimental Methods in Material Dynamics and Impact, Trends in Mechanics of Materials, W.K. Nowacki, J.R. Klepaczko [Eds.], Warsaw, 2001, pp. 337–348.
• 14. T. Nicholas, Tensile testing of materials at high rates of strain, Exp. Mech., 21, 5, 177–195, 1981.
• 15. P. W. Bridgman, Studies in large plastic flow and fracture, Mc Graw-Hill, 1952.
• 16. G. J. Johnson, W. H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, Proceedings of the Seventh International Symposium on Ballistics, The Hague, 1983, pp. 541–547.