Microstructural Changes of Ods Ferritic Steel Powders During Mechanical Alloying

• Autorzy: Oksiuta Z.
• Języki publikacji: EN

Abstrakty

EN

The ODS ferritic steel powder with chemical composition of Fe-14Cr-2W-0.3Ti-0.3Y2O3 was mechanically alloyed (MA) either from elemental or pre-alloyed powders in a planetary ball mill. Different milling parameters have been used to investigate their influence on the morphology and microstructure of the ODS ferritic steel powder. The time of MA was optimized by studying the structural evolution of the powder by means of X-ray diffractometry and TEM. In the case of elemental powder very small, about 10 žm in diameter, spherical particles with a large surface area have been obtained. Flakey-like particles with an average size of about 45 žm were obtained in the case of the pre-alloyed powder. The lattice strain calculated from XRD spectra of the elemental and pre-alloyed powders exhibits a value of about 0.51 % and 0.67, respectively. The pre-alloyed powder after consolidation process showed the highest density and microhardness value.

Słowa kluczowe

EN

ferritic-pearlitic steel; powder metallurgy; mechanical alloying

PL

stal ferrytyczno-perlityczna; metalurgia proszków; mechaniczne stapianie

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2011
• Tom: Vol. 5, no. 2
• Strony: 74--78
• Opis fizyczny: Bibliogr. 10 poz., Rys., Wykr.

Twórcy

autor

Oksiuta Z.

• Białystok University of Technology, Białystok, Poland,

Bibliografia

• 1. Carpinteri F., Mainardi A. [ed.] (1997) Fractals and Fractional Calculus in Continuum Mechanics, Springer Verlag, Wien and New York.
• 2. Coimbra C. F. M. (2003), Mechanics with Variable Order Diferential Operators, Annalen der Physik, Vol. 12, no. 11-12, 692 – 703.
• 3. Günther M. (1986), Zeitdiskrete Steuerungssysteme, VEB Verlag Technik, Berlin, Germany.
• 4. Ifeachor E. C., Jervis B. W. (1993), Digital Signal processing, A Practical Approach, Addison Wesley Longman Limited, Edinburg Gate, England.
• 5. Isermann R. (1998), Digitale Regelsysteme, Springer-Verlag, Berlin, Germany.
• 6. Lorenzo C. F., Hartley T. T. (2002), Variable Order and Distributed Order Fractional Operators, Journal of Nonlinear Dynamics, Vol. 20, no. 1-4, 201-233.
• 7. Lubich C. H. (1986), Discretized fractional calculus, SIAM Journal of Mathematica1 Analysis, Vol. 17, 704-719.
• 8. Machado J. A. T. (2001), Discrete-time fractional-order controllers”, FCAA Journal, Vol. 1, 47-66.
• 9. Miller K. S., Ross B. (1993), An Introduction to the Fractional Calculus and Fractional Differential Equations, John Wiley & Sons Inc., New York, USA.
• 10. Ogata K. (1987), Discrete-time Control Systems, PrenticeHall International Editions, Englewood-Cliffs, USA.
• 11. Ostalczyk P. (2000), The non-integer difference of the discrete-time function and its application to the control system synthesis, International Journal of System Science, Vol. 31, no. 12, 1551-1561.
• 12. Ostalczyk P. (2001), Discrete-Variable Functions, A Series of Monographs No 1018, Technical University of Łódź.
• 13. Ostalczyk P. (2003), The linear fractional-order discrete-time system description, Proceedings of the 9th IEEE International Conference on Methods and Models in Automation and Robotics, MMAR 2002, Międzyzdroje, T.I, 429 – 434.
• 14. Ostalczyk P. (2003), The time-varying fractional order difference equations, Proceedings of DETC’03, ASME 2003 Design Engineering Technical Conference & Computers and Information in Engineering Conference, Chicago, USA, 1-9.
• 15. Ostalczyk P., Derkacz M. (2003), Minimal realisation of a linear fractional-order discrete-time system, Proceedings of the 9th IEEE International Conference on Methods and Models in Automation and Robotics, MMAR 2002, Międzyzdroje, T.I, 461 – 464.
• 16. Oustaloup A. (1995), La dèrivation non entière, Éditions Hermès, Paris, France.
• 17. Podlubny I. (1999), Fractional differential equations, Academic Press, San Diego, USA.
• 18. Zhou K., Doyle J. C., Glover K. (1995), Robust and optimal control, Prentice Hall, New Jersey, USA.