m-Synthesis control of flexible modes of AMB rotor

• Autorzy: Mystkowski A.
• Języki publikacji: EN

Abstrakty

EN

In the paper the optimal robust vibration control of flexible rotor supported by the active magnetic bearings (AMBs) is investigated. The purpose of the control system is stabilization of the high speed rotor and effective control of the rotor vibration due to noncollocation, gyroscopic effects and model uncertainties. The noncollocation effect is considered and frequency modal analysis of the noncollocated AMBs system with gyroscopic effects is presented. The ž-Synthesis control is applied to stabilize the rigid and flexible critical frequency modes of the rotor, with emphasis structural and parametric uncer-tainty. The input and output signals in AMBs system are limited by the weighting functions. The singular value analysis is used to obtain therobust performances of the closed-loop system. The stable operation and good stiffness of the high speed rotor supported magnetically is reached. The dynamical behaviour of the AMBs rotor is evaluated in the range up to 21 000 rpm. The experimental tests show the effectiveness of the robust control system as well as good vibrations reduction and robustness of the designed controllers.

Słowa kluczowe

EN

rotor; synteza; flexibility

PL

wirnik; synthesis; elastyczność

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2010
• Tom: Vol. 4, no. 4
• Strony: 83--90
• Opis fizyczny: Bibliogr. 30 poz., wykr.

Twórcy

autor

Mystkowski A.

• Bialystok University of Technology, Bialystok,

Bibliografia

• 1. Burrows C. R., Sahinkaya M. N, Clements S. (1989), Active Vibration Control of Flexible Rotors: an Experimental and Theoretical Study, Proceedings of the Royal Society of London, Vol. 422, 123-146.
• 2. Burrows C. R., Sahinkaya M. N., Clements S. (1983), Vibration Control of Multi-mode Rotor-bearing Systems, Proceedings of the Royal Society of London, Vol. 386, 77-94.
• 3. Fittro, R. L., Knospe, C. R. (1999), µ Control of a Highspeed Spindle Thrust Magnetic Bearing, Proceedings of the 1999 IEEE international conference on control applications, 570-575.
• 4. Fittro, R. L., Knospe, C. R., Stephens, L. S. (2003), µ-Synthesis Applied to the Compliance Minimization of an Active Magnetic Bearing HSM Spindle’s Thrust Axis, Machining Science and Tech., Vol. 7, 19-51.
• 5. Genta G. (2005), Dynamics of Rotating Systems, Spr.
• 6. Genta G., Carabelli S. (2000), Noncollocation effects on the Rigid Body Rotordynamics of Rotors on Active Magnetic Bearings, 7th Int. Symp. on Mag. B., Zurich.
• 7. Knospe C. R. (2007), Active Magnetic Bearings for Machining Applications, Control Engineering Practice, Vol. 15, 307-313.
• 8. Knospe C. R., Hope R., Fedigan S., Williams R. (1995), Experiments in the Control of Unbalance Response Using Magnetic Bearings, Mechatronics, Vol. 5, 385-400.
• 9. Knospe C. R., Tamer S., Fedigan S. (1996), Robustness of Adaptive Rotor Vibration Control to Structured Uncertainty, Journal of Vibration and Control, Vol. 2, 33-52.
• 10. Knospe, C. R., Fittro, R. L., Stephens, L. S. (1997), Control of a High Speed Machining Spindle via µ-Synthesis, Proc. of 1997 IEEE international conference on control applications, 912–917.
• 11. Losch F. (2002), Identification and Automated Controller Design for Active Magnetic Bearing Systems, Ph.D. Dissertation, Zurich.
• 12. Miatliuk K, Kim Y. H., Kim K. (2009), Motion control based on the coordination method of hierarchical systems, J. of Vibroengineering, V. 11, 523-529.
• 13. Mystkowski A. Gosiewski Z. (2009), The Robust Control of Magnetic Suspension with Rapidly Changing of Rotor Speed, Solid State Phenomena, Vols. 147-149, 302-306.
• 14. Mystkowski A. (2007a), Robust Vibration Control of Rotor Supported Magnetically, Ph.D. dissertation, AGH University of Science and Technology, Cracow.
• 15. Mystkowski A. (2007b), Comparison of H∞ and H2 Optimal Controllers for Active Magnetic Suspension, Developments in Machinery Design and Control, Vol. 6, 37-42.
• 16. Mystkowski A., Gosiewski Z. (2006), The Robust Control of Magnetic Bearings for Rotating Machinery, Solid State Phenomena, Vol. 113, 125-130.
• 17. Mystkowski A., Gosiewski Z. (2008a), Robust Control of Active Magnetic Suspension: Analytical and Experimental Results, Mechanical Systems & Signal Processing, Vol. 22, No. 6, 1297-1303.
• 18. Mystkowski A., Gosiewski Z. (2008b), Robust Control of High Speed Rotor Supported Magnetically, 9th International Conference on Motion and Vibration Control, Munich
• 19. Mystkowski A., Gosiewski Z. (2009), Uncertainty Modelling in Robust Control of Active Magnetic Suspension, Solid State Phenomena, 144, 22-26.
• 20. Nelson H. D. (1980), A Finite Rotating Element Using Timoshenko Beam Theory, ASME Journal of Mechanical Design, Vol. 102, 797-803.
• 21. Preumont A. (2002), Vibration Control of Active Structures An Introduction 2nd Edition, Kluwer Academic Publisher, Springer.
• 22. Sawicki J. T. (2008), Rationale for Mu-synthesis Control of Flexible Rotor-Magnetic Bearings System, Acta Mechanica et Automatica, Vol. 2, No. 2, 67-74.
• 23. Sawicki J. T., Maslen E. H. (2006), AMB Controller Design for a Machining Spindle using µ-Synthesis, The 10th International Symposium on Magnetic Bearings (ISMB-10), Martigny, Switzerland.
• 24. Schweitzer G., Bleuler H., Traxler A. (1994), Active Magnetic Bearings, Hoch. AG an der ETH, Zurich.
• 25. Schweitzer G., Maslen E. H, et al. (2009), Magnetic Bearings: Theory, Design and Application to Rotating Machinery, Springer.
• 26. Spector V. A., Flashner H. (1989), Sensitivity of Structural Models for Noncollocated Control Systems, ASME Journal of Dynamic Systems, Measurement and Control, Vol. 111, 646-655.
• 27. Spector V. A., Flashner H. (1990), Modelling and Design Implications of Noncollocated Control in Flexible Systems, ASME Journal of Dynamic Systems, Measurement and Control, Vol. 112, 186-193.
• 28. Stephens, L. S. (1995), Design and Control of Active Magnetic Bearings for a High Speed Spindle, Ph.D. dissertation, University of Virginia.
• 29. The MathWorks 2004, Robust Control Toolbox User’s Manual, 3rd ed.
• 30. Zhou K., Doyle J. C., Glover K. (1996), Robust and Optimal Control, Prentice-Hall, Inc.