Parametrical models of working rotor machine blade diagnostics with its unmeasurable environment elimination

• Autorzy: Lindstedt P. , Grądzki R.
• Języki publikacji: EN

Abstrakty

EN

The paper presents the basic of the new method of rotor machine blades during their operation. The method utilizes such diagnostic models as a quotient of diagnostic signal y(t) amplification being a result of blade operation and x(t) signal of its environment as the blade tip approaches the sensor as well as amplification of these signals as the blade tip recedes from the sensor and phase shift difference of these signals as the blade tip approaches and recedes from the sensor. The adopted diagnostic models indirectly take the current blade environment x(t) into account with no necessity of measuring (Kotowski and Lindstedt, 2007; Lindstedt and Kotowski, 2004). Therefore the model is sensitive to blade technical condition changes remaining only slightly sensitive to environment changes. Suggested method may prove very important in diagnostics of rotor blades during operation of rotor machines (turbines, compressors etc.).

Słowa kluczowe

EN

rotor blade; diagnostic; parametrical model

PL

łopatka wirnikowa; diagnostyka; model parametryczny

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2010
• Tom: Vol. 4, no. 4
• Strony: 56--63
• Opis fizyczny: Bibliogr. 25 poz., rys., tab., wykr.

Twórcy

autor

Lindstedt P.

autor

Grądzki R.

• Bialystok Technical University, Poland,

Bibliografia

• 1. Bendat J. S., Piersol A. G. (1976), Metody analizy i pomiaru sygnałów losowych, PWN, Warszawa.
• 2. Bovishanskii K. N. (2000) A metod for continously monitoring the vibrational state of the rotating blades of turbomachines, Thermal engineering (Teploenegetika), Vol 47 No 5, St. Petersburg.
• 3. Dołgolienko G. P. (1984) Lietczyje ispytanija spienialnych ustrojstw i sistiem samolietow i wiertolietow Maszinostrożenije, Moskwa.
• 4. Duan F., Fang Z., Sun Y., Ye S. (2005) Real-time vibration measurement technique based on tip-timing for rotating blades, Opto-Electronic Energineering, 30 (1) 29-31
• 5. von Flotow A., Mercadal H. (2000) Turbine rotor health management with blade-tip sensors, From Laboratory Tool To Fielded System.
• 6. High Cycle Fatigue S & program 1997 Annual Report http://stimet.dtic.mil
• 7. High Cycle Fatigue S & program 1998 Annual Report http://stimet.dtic.mil
• 8. High Cycle Fatigue S & program 1999 Annual Report http://stimet.dtic.mil
• 9. High Cycle Fatigue S & program 2000 Annual Report http://stimet.dtic.mil
• 10. High Cycle Fatigue S & program 2001 Annual Report http://stimet.dtic.mil
• 11. High Cycle Fatigue S & program 2002 Annual Report http://stimet.dtic.mil
• 12. Klein B. (2004) Non-Contact Vibration measurements Turbocharges Turbine and Compressor Blades, Proceedings of 1st EVI-GTI International Conference on Gas Turbine Instrumentation, Barcelona.
• 13. Kotowski A., Lindstedt P. (2007) The using of signals of impulse acoustic response in test of rotor blades in stationary conditions, The International Symposium on Stability Control of Rotating Machinery ISCORMA 4, Calgary Alberta Canada.
• 14. Kurowski W. (1994) Podstawy teoretyczne komputerowego miernictwa systemów mechanicznych, Wyd. Politechniki Białostockiej, Białystok.
• 15. Lindstedt P., Kotowski A. (2004) Basic for innovations In vibroacoustic diagnostics of transport machines rotor blades, The Archives of Transport, Vd XVI. No 4.
• 16. Lindstedt P. (2002) Praktyczna diagnostyka maszyn i jej teoretyczne podstaw, Wyd. Naukowe ASKON, Warszawa.
• 17. Lindstedt P., Rokicki E., Borowczyk H., Majewski P.(2009) Application of the correlation function and Fourier transformation to evaluation of technical condition demonstrated by blade sof a rotor machine during the operation process, Journal of KONES Powertrain and transport. Vol 16 No 2, Warsaw.
• 18. Lindstedt P., Rokicki E., Borowczyk H., Majewski P.(2009) Rotor blades condition monitoring method based on the elimination of the environment signal, Research Works of AFIT Issve, 15÷24, Warsaw.
• 19. Niederliński A. (1985) Systemy komputerowe automatyki przemysłowej T2 Zastosowania, WNT, Warszawa.
• 20. Roberts J. P. (2007) Comparison of Tip Timing with strain Ganges for rotor blade vibration measurement, Proceedings of lecture series on Tip Timing an Tip Clearnce Problems in Turbomachines von Belgium.
• 21. Skubacziewskij G. S. (1974) Awiacionnyje gazoturbinnyje dwigatieli Maszinostrojenije, Moskwa.
• 22. Szabatin J. (2000) Podstawy teorii sygnałów, WKŁ Warszawa.
• 23. Szczepanik R., Przysowa R. (2004) Wykonanie badańi pomiarów drgań łopatek metodą bezstykową w odwirowni ALSTOM Power w Elblągu, Sprawozdanie ITWL nr 36/3/2004 Warszawa.
• 24. Szczepanik R. (1999) Ocena propagacji pęknięć zmęczeniowych w wirujących łopatkach sprężarki turbinowego silnika lotniczego, Książka Problemy Badań i Eksploatacji Techniki Lotniczej T4, Wyd. ITWL, Warszawa.
• 25. Zieliński M., Ziller G. (2005) Non-contact Blade Vibration Measurement system for aero engine application, 17th International Symposium on Airbreathing Engines, Semptember 4-9 2005 Munich Germany Paper No ISABE – 2005-1220.