Wybrane zagadnienia kontaktowe teorii sprężystości ośrodków warstwowych

• Autorzy: Kulczycki-Żyhajło R. , Kołodziejczyk W. , Rogowski G.

Warianty tytułu

EN

Selected issues of theory of elasticity for layered bodies

• Języki publikacji: PL

Abstrakty

PL

Rozpatrzono wybrane zagadnienia kontaktowe teorii sprężystości dotyczące wciskania nieodkształcalnego stempla w półprzestrzeń niejednorodną. Rozpatrywana półprzestrzeń składa się z półprzestrzeni jednorodnej oraz pakietu n izotropowych jednorodnych warstw. Algorytm rozwiązywania, oparty na wykorzystaniu przekształceń całkowych, zweryfikowano, modelując ośrodki warstwowe o strukturze periodycznej oraz warstwy, których moduł Younga zmienia się wzdłuż grubości według zależności wykładniczej.

EN

Selected issues of contact theory of elasticity for pressing the rigid punch in non-homogeneous half-space are considered. Half-space consists of homogeneous half-space and a package of n isotropic homogeneous layers. Algorithm of calculation was based on integral transformation and was verified by modeling the layered bodies by periodic layers or layers, which the Young’s module is changed along the thickness of the layer with the exponential dependence.

Słowa kluczowe

PL

sprężystość; zagadnienie kontaktowe; ośrodki warstwowe

EN

issues of contact theory; elasticity; layered bodies

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2009
• Tom: Vol. 3, no. 3
• Strony: 32--38
• Opis fizyczny: Bibliogr. 36 poz., Wykr.

Twórcy

autor

Kulczycki-Żyhajło R.

autor

Kołodziejczyk W.

autor

Rogowski G.

Bibliografia

• 1. Abdul-Baqi A., Van der Giessen E. (2002), Numerical analysis of indentation-induced cracking of brittle coatings on ductile contact: a strain approach, Tribology International, Vol. 36, 935-941.
• 2. Chen W.T., Engel P. (1972), Impact and contact stress analysis in multilayered media, Int. J. Solids Structures, Vol. 8, 1257-1281.
• 3. Diao D. F., Kato K., Hayashi K. (1994), The maximum tensile stress on a hard coating under sliding friction, Tribology International, Vol. 27, 267-272.
• 4. Diao D.F. (1999), Finite element analysis on local yield map and critical maximum contact pressure for yielding in hard coating with an interlayer under sliding contact, Tribology International, Vol. 32, 25-32.
• 5. Fischer-Cripps A.C. (2003), Analysis of instrumented indentation test data for functionally graded materials, Surface and Coating Technology, Vol. 168, 136-141.
• 6. Giannakopoulos A.E., Pallot P. (2000), Two-dimensional contact analysis of elastic graded materials, J. Mech. Physics Solids, Vol. 48, 1597-1631.
• 7. Giannakopoulos A.E., Suresh S. (1997), Indentation of solids with gradients in elastic properties: Part II. Axisymmetric indenters, Int. J. Solids Structures, Vol. 34, 2393-2428.
• 8. Guler M.A., Erdogan F. (2004), Contact mechanics of graded coatings, Int. J. Solids Structures, Vol. 41, 3865-3889.
• 9. Guler M.A., Erdogan F. (2006), Contact mechanics of two deformable elastic solids with graded coatings, Mechanics of Materials, Vol. 38, 633-647.substrates, Int. J. Solids Structures, Vol. 39, 1427-1442.
• 10. Bragallini G.M., Cavatorta M.P., Sainsot P. (2003), Coated
• 11. Guler M.A., Erdogan F. (2007), The frictional sliding contact problems of rigid parabolic and cylindrical stamps on graded coatings, Int. J. Mech. Sci., Vol. 49, 161-182.
• 12. Houmid Bennani N., Takadoum J. (1999), Finite element model of elastic stresses in thin coatings submitted to applied forces, Surface & Coatings Technology, Vol. 111, 80-85.
• 13. Johnson K.L. (1985): Contact Mechanics, Cambridge University Press. Cambridge.
• 14. Kashtalyan M., Menshykova M. (2007), Three-dimensional elastic deformation of a functionally graded coating/substrate system, Int. J. Solids Structures, Vol. 44, 5272-5288.
• 15. Kolodziejczyk V., Kulchytsky-Zhyhailo R. (2007), Pressure of the lateral surface of a cylinder on a periodically layered half space, Materials Science, Vol. 43. 51-57.
• 16. Kouitat Njiwa R., Consiglio R., J. von Stebut (1998), Boundary element modeling of coated materials in static and sliding ball-flat elastic contact, Surface & Coatings Technology, Vol. 102, 148-153.
• 17. Kouitat Njiwa R., J. von Stebut (1999), Boundary element numerical modelling as a surface engineering tool: application to very thin coatings, Surface & Coatings Technology, 116-119 (1999), 573-579.
• 18. Kulchytsky-Zhyhailo R., Kolodziejchyk V. (2005), Stress field caused by Hertz’s pressure in non-uniform half-plane with periodic structure, Friction and Wear, Vol.26, No. 4, 358-366.
• 19. Kulchytsky-Zhyhailo R., Kolodziejczyk V. (2007), On axisymmetrical contact problem of pressure of a rigid sphere into a periodically two-layered semi-space. Int. J. Mech. Sci., Vol. 49, 704-711.
• 20. Kulchytsky-Zhyhailo R., Matysiak S.J. (2005), On heat conduction problem in a semi-infinite periodically laminated layer, Int. Comm. Heat Mass Transfer, Vol. 32, 123-132.
• 21. Kulchytsky-Zhyhailo R., Matysiak S.J. (2005), On some heat conduction problem in a periodically two-layered body: Comparative results, Int. Comm. Heat Mass Transfer, Vol. 32, 332-340.
• 22. Kulchytsky-Zhyhailo R., Matysiak S.J., Perkowski D. (2007), On displacements and stresses in a semi-infinite laminated layer: comparative results, Meccanica, Vol. 42, 117-126.
• 23. Kulchytsky-Zhyhailo R., Rogowski G. (2007), Stresses of hard coating under sliding contact, J. Theoretical Applied Mechanics, Vol. 45, No. 4, 753-772.
• 24. Kulczycki R. (2002), Przestrzenne zagadnienia kontaktowe termosprężystości, Wyd. PB, Białystok.
• 25. Kulczycki R., Rogowski G. (2005), Pole naprężeń w półpłaszczyźnie niejednorodnej wywołane ciśnieniem Hertza, Materiały III Sympozjum Mechaniki Zniszczenia Materiałów i Konstrukcji, Augustów.
• 26. Liao-Liang Ke, Yue_Sheng Wang (2007), Two-dimensional sliding frictional contact of functionally graded materials, European Journal of Mechanics and Solids, Vol. 26, 171-188.
• 27. Liao-Liang Ke, Yue-Sheng Wang (2006), Two-dimensional contact mechanics of functionally graded materials with arbitrary spatial variations of material properties, Int. J. Solids Structures, Vol. 43, 5779-5798.
• 28. Matysiak S.J., Woźniak Cz. (1987), Micromorphic effects in a modeling of periodic multilayered elastic composites, Int. J. Engng. Sci., Vol. 25, 549-559.
• 29. Nowacki W. (1970): Teoria sprężystości, Warszawa, PWN.
• 30. Schwarzer N. (2000), Coating due to analytical modelling of mechanical contact problems on multilayer systems, Surface & Coatings Technology, Vol. 133-134, 397-402.
• 31. Schwarzer N., Richter F., Hecht G. (1999), The elastic field in a coated half-space under Hertzian pressure distribution, Surface & Coatings Technology, Vol. 114, 292-304.
• 32. Shi Z., Ramalingam S. (2001), Stresses in coated solids due to normal and shear tractions on an elliptical region, Surface & Coatings Technology, Vol. 138, 192-204.
• 33. Sneddon I.N. (1972): The Use of Integral Transforms, McGraw-Hill, New York.
• 34. Suresh S., Giannakopoulos A.E., Alcala J. (1997), Spherical indentation of compositionally graded metal-ceramic compo-sites: theory and experiments, Acta mater., Vol. 45, 1307-1321.
• 35. Torskaya E.V., Goryacheva I.G. (2003), The effect of interface imperfection and external loading on the axisymmetric contact with a coated solid, Wear, Vol. 254, 538-545.
• 36. Woźniak Cz. (1987), A nonstandard method of modelling of thermoelastic periodic composites, Int. J. Engng. Sci., Vol. 25, 483-499.