PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Computer processing of some surface images of technical objects after influence of the high temperature conditions

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Computer processing of the image of surface of operating gas turbine blades was proposed in order to make the method of the evaluation of the condition of these blades more objective. The dependences and connections between the degree of blade material overheating and the colour of analyzed surfaces were shown on the basis of images registered in visible range of electromagnetic wave (digital image – Charge Coupled Device matrix). The proposal of methodology to assign the overheated areas on the blade’s surface in order to assess the range (of degradation) of thermal usage of the blade and to forecast it's working resources, might be useful to monitor the situation in the operating conditions. Moreover in the article the problematic of acquisition of the form digital images dates was presented by showing physical basis of analysis of reflected signal from metallic surface are showed in aspect of recording by photoelectric light sensor (matrix CCD).
Rocznik
Strony
19--23
Opis fizyczny
Bibliogr. 10 poz., il., rys., wykr.
Twórcy
autor
  • Białystok Technical University, Faculty of Mechanical Engineering, Department of Automatics and Robotics, ul. Wiejska 45c, 15-351 Białystok, Poland, marbog@doktoranci.pb.edu.pl
Bibliografia
  • 1. Błachnio J. (2005), Non-destructive testing methods as applied to the diagnosing of turbine engines, IV International Scientific – Technical Conference, Gdańsk – Kopenhaga.
  • 2. Błachnio J., Bogdan M.: The assessment of the jet gas-turbine blade condition, Archives of Transport (in print).
  • 3. Błachnio J., The effect of high temperature on the degradation of heat-resistant and high-temperature alloys, MSM2008 (in progress).
  • 4. Bogdan M.: Błachnio J.(2006), Analiza sygnału świetlnego odbitego od powierzchni w diagnostyce obiektów technicznych, VI Krajowa Konferencja Diagnostyka techniczna urządzeń i systemów DIAG'2006, Ustroń, Diagnostyka Nr 2/38/2006, 175÷186.
  • 5. Dudziński A. (1987), Analiza rentgenostrukturalna stopu EI-929 poddanego długotrwałemu wygrzewaniu, Doctor’s Disseration, WAT, Warszawa.
  • 6. Manabe Y.: Inokuchi S. (1996), 13th International Conference on Pattern Recognition (ICPR'96), Vol. 1, 840÷843.
  • 7. Poznańska A. (2000), Żywotność łopatek silników lotniczych ze stopu EI-867 w aspekcie odkształcenia niejednorodnego i zmian strukturalnych, Ph.D. Disseration, Politechnika Rzeszowska, Rzeszów.
  • 8. Rafałowski M. (2004), Scalone analizatory w pomiarach techniki świetlnej i oceny kształtu obiektów, Rozprawy naukowe Nr 114, Wydawnictwo Politechniki Białostockiej, Białystok.
  • 9. Sanecki J. (2006), Teledetekcja - pozyskiwanie danych, WNT, Warszawa.
  • 10. Wiatrek R. (1982), Napędy Lotnicze: Zespoły wirnikowe silników turbinowych, WKŁ, Warszawa.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPB2-0033-0008
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.