Determination of limit pore size distributions of porous materials from mercury intrusion curves

• Autorzy: Cieszko M. , Kempiński M.
• Języki publikacji: EN

Abstrakty

EN

The application of the capillary and chain models of pore architecture are proposed in the paper for determination of limit pore size distributions of porous materials based on the mercury intrusion curves. They estimate the range of pore sizes in the investigated material. It is proved that for a given pore size distribution, the capillary model of pore architecture, commonly used in the mercury porosimetry, and its chain model, are two limit cases of the network model of pore architecture, considered in the paper as a proper model for most real porous materials. For both limit pore architectures, the expressions describing capillary potential curves have been derived that are the basis for the procedure of determination of two limit pore size distributions. This procedure has been illustrated by determining the limit distributions for porous materials made of sintered glass beads.

Słowa kluczowe

EN

porous material; intrusion

PL

materiał porowaty; intruzja

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Engineering Transactions
• Rocznik: 2006
• Tom: Vol. 54, iss. 2
• Strony: 143--158
• Opis fizyczny: Bibliogr. 14 poz., rys., wykr.

Twórcy

autor

Cieszko M.

autor

Kempiński M.

• Institute of Environmental Mechanics and Applied Computer Science, Kazimierz Wielki University in Bydgoszcz, Chodkiewicza 30, 85-064 Bydgoszcz, Poland

Bibliografia

• 1. A.E. SCHEIDEGER, The physics of flow through porous media, Univ. Press, Toronto 1957.
• 2. F.A.L. DULLIEN, Porous media, Academic Press, New York 1979.
• 3. C.A. LEON Y LEON, M.A. THOMAS, Recent advances in the interpretation of mercury porosimetry data, GIT Laboratory Journal, 1, 101-104 1997.
• 4. D.N. WINSLOW, Advances in experimental techniques for mercury intrusion porosimetry, Surf. Colloid Sci., 13, 259-82 1984.
• 5. P.A. WEBB, C. ORR, Analytical methods in fine particle technology, Micrometitics Instrument Corporation, Norcross, GA USA, 1997.
• 6. P. LECLAIRE, M.J. SWIFT, V. HOROSHENKOV, Determining the specific area of porous accustic material from water extraction data, J. Appl. Phys., 10, 1998.
• 7. S. DIAMOND, A critical comparison of mercury intrusion porosimetry and capillary condensation pore size distribution of Portland cement pastes, Cem. Concr. Res., 11, 5, 531-545, 1971.
• 8. R.A. OLSON, M. Neubauer, H.M. Jennings, Damage to the pore structure of hardened Portland cement paste by mercury intrusion, J. Am. Ceram. Soc, 80, 9, 2454-58, 1997.
• 9. F.A.L. DULLIEN, New network permeability model of porous media, AIChE Journal, 21, 2, 299-307, 1975.
• 10. I. CHATZIS, F.A.L. DULLIEN, Modeling pore structure by 2D and 3D networks with applications to sandstones, Journal of Canadian Petroleum Technology, 97-108, 1977.
• 11. M. YANUKA, F.A.L. DULLIEN, D.E. ERLICK, Percolation processes and porous media, I. Geometrical and topological model of porous media using a three-dimensional joint pore size distribution, Journal of Colloid and Interface Science, 112, 1, 24-41 1986.
• 12. G.P. MATTHEWS, A.K. Moss, M.C. SPEARING, F. VOLAND, Network calculation of mercury intrusion and absolute permability in sandstone and other porous media, Powder Technology, 76, 95-107 1993.
• 13. J.E.P. MONTEAGUDO, K. RAJAGOPOL, P.L.C. LAGE, Scaling laws in network models: porous medium property prediction during morphological evolution, Journal of Petroleum Science and Engineering, 32, 179-190 2001.
• 14. LA. CHUZMADZHEW, W.S. MARKIN, M.R. TRANSEWICH, Macrokinetics of processes in porous media [in Russian], Nauka, Moscow 1971.