Influence of the state of the mating friction elements of the drum brake on the outer thermal field

• Autorzy: Orzechowski T.
• Języki publikacji: EN

Abstrakty

EN

The analysis presented below concerns the thermal field of the outer surface of the drum brake registered by means of an AGEMA Series 900LW thermovision camera and the LINY software. Roundness deviations of the inner surface of the drum measured with a TALYROND precise measurement device were compared with the distribution of temperature on the outer surface along the circumference. The results show that these quantities are interdependent and the coefficients of correlation calculated for them are always greater than 0.8. What is more, they are not affected by the type of pressure (i.e. shoe). The distribution of temperature along the generating line of the drum represents the character of the contact between the shoe and the drum. Tests carried out for various arrangements of friction members of the drum brake confirmed the interdependence of the thermal field and the geometry of mating surfaces. A maximum temperature rise of the drum has also been discussed.

Słowa kluczowe

EN

thermal field; friction element

PL

pole temperatur; element tarcia

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Engineering Transactions
• Rocznik: 2002
• Tom: Vol.50, iss.1-2
• Strony: 19--34
• Opis fizyczny: Bibliogr. 14 poz., rys., tab., wykr.

Twórcy

autor

Orzechowski T.

• Kielce University of Technology, Al. 1000-lecia PP 7, 25-314 Kielce, Poland

Bibliografia

• 1. F. T. BARWELL, Bearing systems, Oxford Univ. Press, 1979.
• 2. M. WATREMEZ, J.P. BRICOUT, B. MARGUET, J. OUDIN, Friction, temperature, and wear analysis for ceramic coated brake disks, Journal of Tribology, 118, 457–465, 1996.
• 3. L. SEGAL, Thermal diagnostic method for vehicle brakes, Journal of Testing and Evaluation, 26, 506–509, 1998.
• 4. T.P. NEWCOMB, Temperatures reached in disk brakes, J. Mech. Engng. Sci., 2, 3,167–177, 1960.
• 5. V.V. DUNAYEVSKY, Prediction of railroad friction braking temperatures: prediction of average bulk and average surface temperatures of railroad wheels and brake discs, Tribology Transactions, 34, 343–352, 1991.
• 6. A.J. DAY, M. TIROVIC, T.P. NEWCOMB, Thermal effects and pressure distributions in brakes, Proc. Instn. Mech. Engrs., 205(D), 199–205, 1991.
• 7. A.A. YEVTUSHENKO, E.G. IVANYK, O.O. YEVTUSHENKO, Exact formulae for determination of the mean temperature and wear during braking, Heat and Mass Transfer, 35, 163–169, 1999.
• 8. K. FAUD, M. DAYMUARUYA, H. KOBAYASHI, Temperature and thermal stresses in a brake drum subjected to cyclic heating, Jour. of Thermal Stresses, 17, 515–517, 1994.
• 9. M. NAJI, M. AL.-NIMIR, S.MASOUD, Transient thermal behaviour of cylindrical brake system, Heat and Mass Transfer 36, 45–49, 2000.
• 10. P. DUFRENOY, D. WEICHERT, Prediction of railway disc brake temperatures taking the bearing surface variations into account, Proc. Instn. Mech. Engrs., 209, 67–76, 1995.
• 11. T. ORZECHOWSKI, T.L. STAŃCZYK, A. ZUSKA, Temperature of a brake drum as a diagnostic signal informing about the kind and degree of wear of the friction pair: shoe-drum [in Polish], Przegląd Mechaniczny, 3, 9–16, 2001.
• 12. S. ADAMCZAK, D. JANECKI, Reference method and their wider applicability to measurements of roundness profiles, Springer-Verlag, E &; I, 4, 197–202, 1999.
• 13. B. KUHLMANN-WILDORSF, Temperatures at interfacial contact spots: dependence on velocity and on role reversal of two materials in sliding contact, Journal of Tribology, 109, 321–329, 1987.
• 14. Y. BAYAZITOGLU, M.N. OZISIK, Elements of heat transfer, McGraw-Hill, 1988.