Study on normal stresses in composite curved beams subjected to unsymmetrical bending

• Autorzy: Aimin Y.
• Języki publikacji: EN

Abstrakty

EN

Based on the formula for normal stresses in curved beams of one material, the formulae for normal stresses in composite curved beams with general cross-sectional shape under complicated loads can be derived. The novel formulae presented in this paper can be used in evaluating the normal stresses of connecting rod bush coated with bearing metal for internal combustion engine. These normal stress formulae, in special case, are reduced to those for composite curved beams subjected to symmetrical bending. A numerical example is given for verification at the end of this paper.

Słowa kluczowe

EN

stress; composite beam; composite

PL

naprężenie; belka zespołowa; kompozyt

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Engineering Transactions
• Rocznik: 2002
• Tom: Vol.50, iss.3
• Strony: 177--185
• Opis fizyczny: Bibliogr. 4 poz., rys.

Twórcy

autor

Aimin Y.

• Tongji University, Department of Engineeing Mechanics and Technology, Key Laboratory of Solid Mechanics of MOE, Shanghai, 200092, China,

Bibliografia

• 1. AIMIN YU, XINSHUANG CHEN, An analysis of the normal stress induced by combination of the bending moment and normal internal force in combined curved beam, Journal of Shanghai Institute of Building Material [in Chinese], 6, 4, 370–377, 1993.
• 2. AIMIN YU, XINSHUANG CHEN, A study of shearing and radial stresses in a composite curved beam, Shanghai Journal of Mechanics [in Chinese], 15, l, 74–80, 1994.
• 3. J.T. ODEN, E.A. RIPPERGER, Mechanics of elastic structures, New York, St. Louis, San Francisco, 1967.
• 4. AIMIN Yu, YILONG Zou, Experiment research and computation for the testing stress and displacement of bearing shoes [in Chinese], Journal of East China University of Science and Technology, 20, 2, 233–238, 1994.