Modelling of material damage process under tensile stress with stable loading rate and application of the additional high-frequency cyclic component

• Autorzy: Yasniy P. , Halaushchak M. , Fedak S.
• Konferencja: Sympozjum Mechaniki Zniszczenia Materiałów i Konstrukcji (23-26.05.2001 ; Augustów ; Polska)
• Języki publikacji: EN

Abstrakty

EN

The damaging model in the material which takes into account the material grain structure as well as the increasing of the ralative voids square in the specimen cross section under one-axel tensile was developed.

Słowa kluczowe

EN

material damage; stress

PL

uszkodzenie materiału; naprężenie

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Zeszyty Naukowe Politechniki Białostockiej. Mechanika
• Rocznik: 2001
• Tom: Z. 24
• Strony: 477--481
• Opis fizyczny: Bibliogr. 7 poz., wykr.

Twórcy

autor

Yasniy P.

• Ternopil Ivan Pul'uj State Technical University, 56 Ruska St, Ternopil, Ukraine

autor

Halaushchak M.

• Ternopil Ivan Pul'uj State Technical University, 56 Ruska St, Ternopil, Ukraine

autor

Fedak S.

• Ternopil Ivan Pul'uj State Technical University, 56 Ruska St, Ternopil, Ukraine

Bibliografia

• 1. Bozydarnyk V. V., Sulym G. T. (1990): Elements of theory of plasticity and strength, Vol.1, Lviv: Svit.
• 2. Chen I.-W., Argon A. S. (1981): Creep cavitation in 304 stainless steel, Acta Met., 29, 1321-1333.
• 3. Dal V., Anton V. (eds) (1986): Static strength and mechanics of failure, M., Metalurgia, 556.
• 4. Galushchak M. P., Yasniy P. V., Stoyanova O. M., Fedak S. I. (2001): Microstructural peculiaries of Al-Mg6 Alloy deformation at creep and tensile, Physicochemical Mechanics of Materials, (to be published).
• 5. Karzov G. P., Margolin B. Z., Shvetsova V. A. (1993): Physical and mechanic modelling i fracture processes, S. Petersbourg: Politekhnika.
• 6. Kuklina O. V., Margolin B. Z. (1990): Physical and mechanic model of failure and cree. Problems of strength, No. 10, 23-29.
• 7. Yasniy P. V., Galushchak M. P. (1998): Methods and some results of studying of the influence of cyclic loading on diagrams of Al-Mg alloy deformation, Visnyk Ternopilskogo derzhavncogo tekhnichnogo universutetu, Vol. 3., Part 4. 62-66.