Effect of panelling, application of the Kutta condition and the way of positioning the control points on the numerical solution of panel methods : Part II

• Autorzy: Bahbah M. M. , Maruszewski B.
• Konferencja: International Conference on Numerical Mathematics and Computational Mechanics (7 ; July 1996 ; Miskolc ; Węgry)
• Języki publikacji: EN

Abstrakty

EN

An efficient, accurate, and simple numerical method is necessarv for analysis and design of an incompressible potential flow around multi-element airfoils. In this paper, which is the subject of the second part of the study, the mathematical model is built utilizing the local coordinate system, while in the first part of the study [2] only the global coordinate system is used. Mathematical model, by the vortex panel method with the use of the stream function, is written for the analysis of potential flow over multi-element airfoils. The computational model is built for both uniform and linear vortex distributions with utilizing the constant stream function boundary condition. From the fact that any study which does not consider deeply and precisely, all the parameters relevant to the computational model, might make is fragmentary. Hence, the following parameters are tested to investigate their effect on the accuracy of the method. They are: both types of the vortex distribution, two types of panelling, different ways of applying the Kutta condition, and two ways of positioning the control points. For the purpose of easier comparison, the study cases performed using the present, model are restricted only to single-element airfoils; NACA 0012 airfoil at an angle of attack a=8.3°, and a cusped trailing edge 15 percent thick Van de Vooren airfoil at a=5°.

Słowa kluczowe

EN

numerical methods; mathematical model

PL

metody numeryczne; model matematyczny

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Computer Assisted Mechanics and Engineering Sciences
• Rocznik: 1998
• Tom: Vol. 5, nr 1
• Strony: 9--19
• Opis fizyczny: Bibliogr. rys., wykr.

Twórcy

autor

Bahbah M. M.

autor

Maruszewski B.

• Poznań University of Technology, Institute of Applied Mechanics [Politechnika Poznańska, Instytut Mechaniki Stosowanej], ul. Piotrowo 3, 60-965 Poznań