Kinematical analysis of mandibular motion in a sagittal plane

• Autorzy: Margielewicz. J. , Chladek W. , Lipski T.
• Języki publikacji: EN

Abstrakty

EN

The paper presents a kinematical model enabling the analysis of mandibular motion in a sagittal plane. Based on the recorded trajectories of incisors, the configuration coordinates were identified. The configuration coordinates explicitly identify the position and orientation of the mandible during motion. Such values are basic to the evaluation of alteration in muscle length and to the orientation of forces in particular muscles. This paper also deals with the influence of the coefficients of the weight matrix on the character of the solutions of the configuration coordinates applied in the model study of the kinematical chain. The results of the numerical calculations obtained demonstrated that the trajectory representation was in a considerable concordance with the data recorded.

Słowa kluczowe

EN

biomechanics; modelling; trajectory; stomatognathic system

PL

biomechanika; modelowanie; stomatognatyczny system

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Acta of Bioengineering and Biomechanics
• Rocznik: 2008
• Tom: Vol. 10, nr 1
• Strony: 9--19
• Opis fizyczny: Bibliogr. 14 poz., rys., wykr.

Twórcy

autor

Margielewicz. J.

autor

Chladek W.

autor

Lipski T.

• Silesian Technical University, Department of Medical Engineering, Poland

Bibliografia

• [1] CHLADEK W., Modelling system of selected mechanical states of the human mandible (in Polish), Silesian University of Technology, Z. 59, Metallurgy, Gliwice, 2000.
• [2] CHOLEWA W., MOCZULSKI W., Technical diagnostics of machines. Signals, measurements and analysis (in Polish), Silesian University of Technology, lecture No. 1758, Gliwice, 1993.
• [3] CRAIG J.J., Introduction to robotics. Mechanics and steering (in Polish), WNT, Warszawa, 1995.
• [4] HEIMANN B., GERTH W., POPP K., Mechatronics – components, methods and examples (in Polish), PWN, Warszawa, 2001.
• [5] IDE Y., NAKAZAWA K., Anatomical Atlas of the Temporomandibular Joint, Quintessence Publishing Co., Ltd., Osaka, 1991.
• [6] KLEINROK M., Mastication under correct and dysfunctional intra-articular conditions of the temporomandibular joints. Modern denistry technician (in Polish), 7th Conference on Biomaterial & Mechanics in Dentistry, Katowice, 2006, 99– 102.
• [7] KNAPCZYK J., LEBIEDIEW P.A., Theory of spatial mechanisms and manipulators (in Polish), WNT, Warszawa, 1990.
• [8] KOBER K., Zahnärztliche Prothetik. BD. II: Behandlungsplan, Kronenzahnersatz, Bückenzahnersatz, Partielle Prothesen, Vollprothesen, Georg Thieme Verlag Stuttgart, New York, 1980.
• [9] LEINTNER R., Outline of higher mathematics for engineers (in Polish), P. 1, WNT, Warszawa, 1981.
• [10] LYONS R.G., Introduction to digital signal processing (in Polish), WKŁ, Warszawa, 2000.
• [11] MARGIELEWICZ J., CHLADEK W., Study on modelling of mandibular inverse kinematics based on example of motions in the sagittal plane. Modern denistry technician (in Polish), 7th Conference on Biomaterial & Mechanics in Dentistry, Katowice, 2006, 147–152.
• [12] MARGIELEWICZ J., CHLADEK W., Kinematics of mandibular muscles in the sagittal plane during mastication. Modern denistry technician (in Polish), 7th Conference on Biomaterial & Mechanics in Dentistry, Katowice, 2006, 153–158.
• [13] OKESON J.P., Treatment of disfunctional mastication organs and occlusal disorders (in Polish), ed. by Czelej, Lublin, 2005.
• [14] ROSŁONIEC S., Selected numerical methods with the examples of application in engineering practice (in Polish), Publishing House of the Warsaw University of Technology, Warszawa, 2002.