Experimental and numerical approach to chosen types of mandibular fractures cured by means of miniplate osteosynthesis

• Autorzy: Kromka M. , Milewski G.
• Języki publikacji: EN

Abstrakty

EN

The paper presents experimental and numerical analyses of two cases of mandibular corpus fractures cured by means of miniplate implantation. In the laboratory tests, strain gauges and electronic speckle pattern interferometry methods were used, while in the numerical simulations finite element analyses were applied. The aim of such a combined approach was to verify a correctness of the numerical model applied with regard to the assumptions and simplifications which had been done when creating FEM for human mandible: healthy, broken and stabilized with miniplate implants.

Słowa kluczowe

EN

strain gauges; ESPI; FEM; mandibular fractures

PL

implant; metoda elementów skończonych; żuchwa

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Acta of Bioengineering and Biomechanics
• Rocznik: 2007
• Tom: Vol. 9, nr 2
• Strony: 49--54
• Opis fizyczny: Bibliogr. 6 poz., rys., tab., wykr.

Twórcy

autor

Kromka M.

autor

Milewski G.

• Cracow University of Technology, Institute of Applied Mechanics, Al. Jana Pawła II 37, 31-864 Kraków

Bibliografia

• [1] BARTKOWSKI S., (editor), Chirurgia szczękowa, Wydawnictwa Collegium Medicum UJ, Kraków, 1996.
• [2] OSBORN J.W., Features of human jaw design which maximize the bite force, Journal of Biomechanics, 1996, Vol. 29, No. 5, 589–595.
• [3] CHLADEK W., Systemy modelowania wybranych stanów mechanicznych żuchwy ludzkiej, Zeszyty Naukowe Politechniki Śląskiej, Gliwice, 2000.
• [4] KROMKA M., Analiza wytrzymałościowa osteosyntezy minii makropłytkowej urazów żuchwy, PhD thesis, Kraków, 2006.
• [5] HÄRLE F., CHAMPY M., TERRY B.C., Atlas of Craniomaxillofacial Osteosynthesis, Thieme, Stuttgart–New York, 1999.
• [6] KROMKA M., MILEWSKI G., BĘDZIŃSKI R., ŚCIGAŁA K., Applicationof speckle holographic interferometry in miniplates osteosynthesis of mandibular fractures, 22nd Danubia–Adria Symposium on Experimental Methods in Solid Mechanics, 2005, 118–119.