Experimental investigation of cervical spine fixators

• Autorzy: Pezowicz C.
• Języki publikacji: EN

Abstrakty

EN

The author uses a holographic interferometry technique to measure the displacement of cervical spine fixators when applied to a section of cadaveric spine which is loaded in bending and torsion. The analysis was undertaken to assess the effect of stabilizers implanted in the cervical section of the spine on the load bearing mode and the rigidity relationships.

Słowa kluczowe

EN

biomechanics; cervical spine; medical research; fixator plates; displacement distribution

PL

biomechanika; kręgosłup; badania medyczne

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Acta of Bioengineering and Biomechanics
• Rocznik: 2001
• Tom: Vol. 3, nr 2
• Strony: 3--13
• Opis fizyczny: Bibliogr. 16 poz., rys., tab., wykr.

Twórcy

autor

Pezowicz C.

• Wrocław University of Technology [Politechnika Wrocławska], Institute of Machine Design and Operation, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław

Bibliografia

• [1] ABITBOL J.J., ZDEBLICK T., KUNZ D., MCCABE R., COOKE M.A., Biomechanical Analysis of Modern Anterior and Posterior Cervical Stabilization Techniques, Proceedings of the Ameri­ can Academy of Orthopaedic Surgeons, 1994, pp. 10-11.
• [2] Experimental analysis of strain and stress, ed. by Z. ORLOS, PWN, Warsaw, 1977.
• [3] BĘDZIŃSKI R., Biomechanics Engineering, Selected Problems, Wroclaw University of Technology, Wroclaw, 1997.
• [4] CLAUSEN J.D., GOEL V.K., TRAYNELIS V.C., RYKEN T.C., ZHENG Z., ROACH R.M., Biomechanics of Caspar and Synthes plates in quasi-static and cyclic loading models, BED 24 Bioengineer- ing Conf., 1993, pp. 618-20. ·
• [5] COE J.D., WARDEN K.E., SUTTERLIN C.E., MCAFEE P.C., Biomechanical evaluation of cervical spinal stabilization methods in a human cadaveric model, Spine, 1989, No. 14, pp. 1122-1130.
• [6] GRUBB M.R., CURRIER B.L., BONIN V., GRABOWSKI J.J., Biomechanical evaluation of ante­ rior cervical stabilization in a porcine model, Transactions of the 39th Meeting of the Orthopaedic Research Society, 1993, pp. 714.
• [7] KOTANI Y., CUNNINGHAM B.W., ABUMI K., MCAFEE P.C., Biomechanical analysis of cervical stabilization systems, Spine, 1994, Vol. 19, No. 22, pp. 2529-2539.
• [8] MALCA S.A., ROCHE P.H., ROSSET E., PELLET W., Cervical interbody xenograft with plate fixation: Evaluation of fusion after 7 years of use in post-traumatic discoligamentous instability, Spine, 1996, Vol. 21, No. 6, pp. 685-690.
• [9] PEZOWICZ C., Analysis of overload mechanics and the human cervical spine fixation, Ph.D. dissertation, University of Technology, Wroclaw, 1999.
• [10] RICHMAN J.D., THOMASE.D., ANDERSON D.D., MILLER P.L., DOUGLAS R.A., Biomechanical evaluation of cervical spine stabilization methods using a porcine model, Spine, 1995, Vol. 20, No. 20, pp. 2192.
• [11] SHEA M., EDWARDS W.T., WHITE A.A., HAYES W.C., Variations of stiffness and strength along the human cervical spine, J. Biomechanics, 1991, Vol. 24, No.2, pp. 95-107.
• [12] SPIRAKIS A., LEARMANTH L.D., GRYZAGORIDIS J., The use of holographic interferometry in the assessment of orthopaedic implants, Experimental Mechanics, Technology Transfer between High Tech. Engineering and Biomechanics, ed. by E.G. LITTLE, Amsterdam, 1992.
• [13] SUTTERLIN C.E., MCAFEE P.C., WARDEN K.E., REY R.M., A biomechanical evaluation of cervical spine stabilization methods in a bovine model, Spine, 1988, No. 13, pp. 795-802.
• [14] TRAYNELIS V.C, DONAHER P.A., ROACH R.M., KOJIMOTO H., GOEL V.K, Biomechanical com­ parison of anterior Caspar and three-level posterior fixation techniques in a human cadaveric model, J. Neurosurg, 1993, No. 79, pp. 96-103.
• [15]ULRICH C., WORSDORFER 0., CLAES L., MAGERL F., Comparative study of stability of anterior and posterior cervical spine fixation procedures, Arch. Orthop. Trauma Surg., 1987, No. 106, pp. 226-231.
• [16] WEIS J.C., CUNNINGHAM B.W., KANAYAMA M., PARKER L., MCAFEE P.C., In vitro biomechanical comparison of multistrand cables with conventional cervical stabilization, Spine, 1996, Vol. 21, No. 18, pp. 2108-2114.