Shakedown of elastic-thermo-plastic structures

• Autorzy: Vranković N. , Stegic M. , Kranjčević N.
• Konferencja: International Conference on Numerical Methods and Continuum Mechanics (7 ; October 6-9, 1998, Stará Lesná ; High Tatras ; Slovakia)
• Języki publikacji: EN

Abstrakty

EN

Recently formulated shakedown theorems for materials with temperature-dependent yield stress [1] are applied to evaluation of the elastic shakedown boundary. In order to simulate actual shakedown behavior of elastic-thermo-plastic structures resulting from experimental investigations, the material model of the German mild steel St 37 is considered. It is found that the obtained elastic shakedown boundaries are within the corresponding boundaries based on the classical shakedown theory. Two examples are compared with the well-known solutions obtained for the neglected yield stress dependence on temperature.

Słowa kluczowe

EN

thermomechanical treatment; continuum mechanics

PL

obróbka cieplno-mechaniczna; mechanika ośrodka ciągłego

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Computer Assisted Mechanics and Engineering Sciences
• Rocznik: 2000
• Tom: Vol. 7, No. 2
• Strony: 239--245
• Opis fizyczny: Bibliogr. 13 poz., rys., wykr.

Twórcy

autor

Vranković N.

• University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lucica 5, 10000 Zagreb, Croatia

autor

Stegic M.

• University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lucica 5, 10000 Zagreb, Croatia

autor

Kranjčević N.

• University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lucica 5, 10000 Zagreb, Croatia

Bibliografia

• [1] G. Borino, C. Polizzotto. Shakedown theorems for a class of materials with temperature-dependent yield stress. In: D.R.J. Owen, E. Onate, E. Hinton, eds., Proceedings of the 5-th International Conference on Computational Plasticity, 475-480. CIMNE, Barcelona, 1997.
• [2] F. Giambanco, L. Palizzolo, T. Panzeca. A bounding technique for plastic deformations. Cornputcitional Mechanics, 9: 153-171, 1992.
• [3] D. A. Gokhfeld, O. F. Cherniaysky. Limit Analysis of Structures at Thermal Cycling. Sijthoff and Noordhoff, The Netherlands, 1980.
• [4] M. Kleiber, J.A. K6nig. Incremental shakedown analysis in the case of thermal effects. Int. J. Num. Meth. Engng., 20: 1567-1573, 1984.
• [5] J. A. K6nig. A shakedown theorem for temperature-dependent elastic moduli. Bull. Acad. Pol. Sci. Ser. Sci. Tech., 17: 161-165, 1969.
• 16] J. A. Kónig. On the incremental collapse criterion accounting for temperature dependence of yield-point stress. Arch. Mech. Stos., 31: 317-325, 1979.
• [7] J. A. Kiinig. Shakedown criteria in the case of loading and temperature variations. J. Mech. Teor. Appl., 21 special issue: 92-108, 1982.
• [8] M. M. Megahed. Influence of hardening rules on the elasto-plastic behavior of a simple structure under cyclic loading. Int. J. Mech. Sci., 23: 169-182, 1981.
• [9] R. S. Ponter, A.C.F. Cocks. The incremental strain growth of elastic-plastic bodies subjected to high levels of cyclic thermal loading. Journal of Applied Mechanics, 51: 470-474, 1984.
• [10] R. S. Ponter, S. Karadeniz. An extended shakedown theory for structures that suffer cyclic thermal loading: Part I — Theory and Part II — Applications. Journal of Applied Mechanics, 52: 877-889, 1985.
• [11] W. Prager. Shakedown in elastic-plastic media subjected to cycles of load and temperature. In: Proceedings of the Symposium in honour of Arturo Dannusso, 239-244. N. Zanichelli, Bologna, 1956.
• [12] J.C. Simo, C. Miehe. Associative coupled thermoplasticity at finite strains: formulation, numerical analysis and implementation. Comput. Meths. Appl. Mech. Enging., 98: 41-104, 1992.
• [13] F. Szepan. Ein elastisch-viskoplastisches Stoffgesetz sur Beschreibung grosser Formanderungen unter Berficksichtigung der thermomechanischen Kopplung. Mitt. Inst. f. Mechanik No. 70, Ruhr-Universitat Bochum, 1989.