A polyoptimal catalogue of rolled profiles for a given class of spatial trusses

• Autorzy: Badower A. , Paczkowski W. M. , Jendo S.
• Języki publikacji: EN

Abstrakty

EN

The purpose of this polyoptimization was to find optimal tubular cross section catalogues for the specified spatial trusses. Five different spans of trusses have been analyzed, starting from 24x24 m ending at 72x72 m, trusses supported at every other perimeter node, with loading conditions typical for roofs. Four decision variables were taken under consideration, i.e. the catalogue size t, its arrangement T in a metallurgical catalogue T_M, minimal and maximal diameters of tubular elements D_{min} and D_{max}. Two objective functions: truss mass and manufacturability of particular solutions were evaluated. For that purpose, some design, technological, and computational constraints were taken into account. For the specified spans L, different catalogues of cross sections were defined by TOPSIS method.

Słowa kluczowe

EN

polyoptimization; spatial structure; spatial truss

PL

polioptymalizacja; przekrycie konstrukcyjne; kratownica przestrzenna

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Computer Assisted Mechanics and Engineering Sciences
• Rocznik: 2000
• Tom: Vol. 7, No. 1
• Strony: 103--116
• Opis fizyczny: Bibliogr. 14 poz., tab., wykr.

Twórcy

autor

Badower A.

• Technical University of Szczecin, Department of Civil Engineering [Politechnika Szczecińska, Instytut Inżynierii Lądowej], al. Piastów 50, 70-311 Szczecin, Poland

autor

Paczkowski W. M.

• Technical University of Szczecin, Department of Civil Engineering [Politechnika Szczecińska, Instytut Inżynierii Lądowej], al. Piastów 50, 70-311 Szczecin, Poland

autor

Jendo S.

• Polish Academy of Science, Swiętokrzyska 21, 00-049 Warszawa, Poland

Bibliografia

• [1] W. Bogucki, M. Żyburtowicz. Tables for design of metallic structures (in Polish). Arkady, Warszawa, 1996.
• [2] J. Bródka, A. Czechowski, A. Grudka, J. Karczewski, J. Kordjak, Z. Kowal, M. Kwaśniewski, M. Lubiński. Spatial truss structures (in Polish). Arkady, Warszawa, 1985.
• [3] W. Gutkowski. Regular Bar Structures (in Polish). PWN, Warszawa, 1973.
• [4] W. Gutkowski, J. Zawidzka. Sequential algorithm for discrete minimum weight design of structures. In: W. Gutkowski, Z. Mróz, eds., WCMSO-2 Second World Congress of Structural and Multidisciplinary Optimization, May 26-30, 1997, Zakopane, IFTR PAS, 1: 313-318. Wydawnictwo Ekoinżynieria, Lublin, 1997.
• [5] E. J. Haug, J. S. Arora. Applied optimal design; mechanical and structural systems. John Wiley and Sons, New York, 1979.
• [6] S. Jendo, W.M. Paczkowski, Multicriteria discrete optimization of large scale truss systems. Structural Optimization, 6: 238-249, 1993.
• [7] S. Jendo, W.M. Paczkowski. Multicriterion optimum space truss design by catalogue. Materiały XIII Konferencji Polioptymalizacja ż CAD '99. Zeszyt Naukowy Wydziału Mechanicznego Nr 19, WSIni. w Koszalinie, 99-110, Koszalin—Kołobrzeg, 1995.
• [8] J.A. Karczewski, W.M. Paczkowski. Discrete multicriterion optimization of a space truss. Int. T. Space Structures, 9(1): 27-38, 1994.
• [9] M. Mengeringhausen. Raumfachwerke aus Stdben und Knoten. Bauverlag GmbH, Wiesbaden und Berlin, 1975.
• [10] W.M. Paczkowski, A. Badower. The selection of cross sections catalogue for space trusses of different span. In: W. Gutkowski, Z. Mróz, eds., WCMSO-2 Second World Congress of Structural and Multidisciplinary Optimization, May 26-30, 1997, Zakopane, IFTR PAS, 2: 773-778. Wydawnictwo Ekoinżynieria, Lublin, 1997.
• [11] W.M. Paczkowski, S. Jendo. Techniques in multi-criteria optimization of large-scale bar systems. In: T. C. Leondes, ed., Structural Dynamic Systems, Computational Techniques and Optimization, Optimization Techniques, Chapter 2, 73-167. Gordon and Breach International Series in Engineering, Technology and Applied Science, Vol. 9, 1999.
• [12] W.M. Paczkowski, S. Jendo. An application of a decomposed ortho-diagonal method to discrete polyoptimization of a hall with spatial grid structure. GAMES, 6: 137-162, 1999.
• [13] S. Pyrak, ed. Choice of building codes (in Polish). Komitet Doskonalenia Kadr ZG PZITB, Warszawa, 1992.
• [14] M. Pyrz. Minimum weight design of trusses using heuristic rules. Engineering Transactions, 3(3-4): 361-373, 1996.