Geometrical data extraction of axisymmetric parts from the B-Rep models

• Autorzy: Nikiel G.

Warianty tytułu

PL

Ekstrakcja danych geometrycznych elementów maszyn osiowo-symetrycznych z modeli B-Rep

• Języki publikacji: EN

Abstrakty

EN

For manufacturing processes planning the different product data are required. Especially, a geometrical description of the manufactured element is indispensable. Widely applied for this aim the 3D models have many advantages in comparison to the 2D models and usually they are more useful. Sometimes it is different. Such situation is in case of the axisymmetric parts, machined on the lathes. A manufacturing process planning can be carried out on basis of a 2D model and often so this is made. Therefore, in this paper an automatic procedure for conversion of the rotational parts 3D model to the 2D model is introduced. In this approach the B-Rep model representation method is applied and a STEP file (ISO 10303:203) as the data carrier is used. Moreover, an example is presented where effectiveness of the described procedure was confirmed.

PL

Projektowanie procesów wytwarzania elementów maszyn wymaga określenia danych wejściowych, w tym opisu postaci geometrycznej. Powszechnie używane w tym celu modele 3D mają wiele zalet, jednak ich zastosowanie jest ograniczone, na przykład podczas toczenia elementów osiowo-symetrycznych na tokarkach. Projektowanie takich procesów obróbki może i najczęściej jest oparte na modelach 2D. W pracy przedstawiono procedurę automatycznego przekształcania danych opisujących model B-Rep takich elementów na postać konturu 2D przy stosowaniu zapisu tych danych zgodnie z protokołem aplikacyjnym ISO 10303:203 (norma STEP). Omówiono także przykład potwierdzający skuteczność takiego postępowania.

Słowa kluczowe

EN

CAD/CAM; 3D model; manufacturing processes planning; STEP standard

PL

CAD/CAM; model 3D; projektowanie procesów wytwarzania; norma STEP

• Wydawca: Komitet Budowy Maszyn PAN ; De Gruyter
• Czasopismo: Advances in Manufacturing Science and Technology
• Rocznik: 2011
• Tom: Vol. 35, nr 2
• Strony: 73--86
• Opis fizyczny: Bibliogr. 19 poz., rys.

Twórcy

autor

Nikiel G.

• University of Bielsko-Biała, Department of Manufacturing Technology and Automation, 43-309 Bielsko-Biała, ul. Willowa 2,

Bibliografia

• [1] G. NIKIEL: Geometrical data exchange in the computer aided design and manufacturing. Mechanik, 83(2010)2, 125-127.
• [2] A. ERSAN, U. SEKER, N. ALPDEMIR: Data extraction from CAD model for rotational parts to be machined at turning centres. Turkish Journal of Engineering and Environmental Science, 23(1999), 339-347.
• [3] M. KUMAR, S. RAJOTIA: Development of a generative CAPP system for axisymmetric components for a job shop environment. Journal Advances Manufacturing Technology, 27(2005), 136-144.
• [4] M. KALT A, B.J. DAVIES: An IGES pre-processor to integrate CAD and CAPP for turned components. Journal Advances Manufacturing Technology, 9(1994), 291-304.
• [5] Y. YILDIZ, I. KORKUT, U. SEKER: Development of a feature based CAM system for rotational parts. Gazi University Journal Science, 19(2006), 35-40.
• [6] M.P. BHANDAKAR, R. NAGI: STEP-based feature extraction from STEP geometry for agile manufacturing. Computers in Industry, 41(2000), 3-24.
• [7] N. ISMAIL, N. ABU BAKAR, A.H. JURI: Recognition of cylindrical-based features using edge boundary technique for integrated manufacturing. Robotics and Computer-Integrated Manufacturing, 20(2004), 417-422.
• [8] N. ISMAIL, N. ABU BAKAR, A.H. JURI: Feature recognition patterns for form features using boundary representation models. Journal Advances Manufacturing Technology, 20(2002), 553-556.
• [9] E. NASR, A. KAMRANI: A new methodology for extracting manufacturing features from CAD system. Computers and Industrial Engineering, 51(2006), 389-415.
• [10] ISO 10303-42:2003. Industrial automation systems and integration - Product data representation and exchange - Part 42: Integrated generic resources: Geometric and topological representation.
• [11] ISO 10303-203:2005. Industrial automation systems and integration - Product data representation and exchange - Part 203: Application protocol: Configuration controlled 3D design of mechanical parts and assemblies (modular version).
• [12] ISO 10303-214:2010. Industrial automation systems and integration - Product data representation and exchange - Part 214: Application protocol: Core data for automotive mechanical design processes.
• [13] ISO 10303-21:2002. Industrial automation systems and integration - Product data representation and exchange - Part 21: Implementation methods: Clear text encoding of the exchange structure.
• [14] ISO 10303-28:2007. Industrial automation systems and integration - Product data representation and exchange - Part 28: Implementation methods: XML representations of EXPRESS schemas and data, using XML schemat.
• [15] ISO 10303-201:1994. Industrial automation systems and integration - Product data representation and exchange - Part 201: Application protocol: Explicit draughting.
• [16] B. BAUMGART: A polyhedron representation for computer vision. AFIPS Conference Proceedings, 44 (1975), 589-596.
• [17] J.J. SHAH, M. MÄNTYLÄ: Parametric and feature-based CAD/CAM. Willey, New York 1995.
• [18] H. WANG, R.A. WYSK, T.C. CHANG: Computer aided manufacturing. Prentice Hall, New York 2005.
• [19] C. EASTMAN: Building product models: computer environments supporting design and construction. CRC Press LLC, 1999.