PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Corrosion resistance of Zi-Ni coatings exposured to neutral salt spray

Identyfikatory
Warianty tytułu
PL
Charakterystyka odporności korozyjnej powłok Zn-Ni poddanych działaniu obojętnej mgły solnej
Języki publikacji
EN
Abstrakty
EN
Zn-Ni coatings (c.a. 30 wt.% Ni) have been deposited under galvanostatic conditions on a carbon steel substrate (St3S) from an ammonia bath. The corrosion resistance of the obtained coatings was examined using accelerated corrosion test (NSS - neutral salt spray) according to ISO 9227:2007. In order to compare corrosion properties of the as-deposited Zn-Ni coating, Zn-Ni coating after exposure to the NSS environment and Zn coating the potentiodynamic technique, electrochemical impedance spectroscopy (EIS) and scanning Kelvin probe (SKP) methods were used. The obtained results indicate that as-deposited and after NSS test Zn-Ni coatings exhibit better corrosion resistance in 5% NaCl than Zn coating. It was found that addition of nickel in zinc matrix improves corrosion properties of the oxide layer formed on the coating surface. Moreover Zn-Ni coating after exposure to the neutral salt spray have higher corrosion resistance in comparison with as-deposited Zn-Ni coating. It was stated that improved corrosion resistance of the Zn-Ni coatings after salt spray test could be attributed to the presence of Zn5(OH)8Cl2źH2O phase formed on the coating surface.
PL
Elektrolityczne powłoki Zn-Ni (Ni ok. 30% mas.) wytworzono w warunkach galwanostatycznych na podłożu stalowym (S235JR) z kąpieli amoniakalnej. Powłoki Zn-Ni poddano działaniu obojętnej mgły solnej (NSS) zgodnie z ISO 9227:2007. Porównano odporność korozyjną powłok: Zn, Zn-Ni w stanie wyjściowym oraz Zn-Ni po przyśpieszonych badaniach w komorze solnej. Stosowano następujące metody badań: technikę polaryzacji potencjodynamicznej, elektrochemiczną spektroskopię impedancyjną (EIS) i skaningową technikę z użyciem sondy Kelvina (SKP). Analiza wyników badań wskazuje, że powłoki Zn-Ni w stanie wyjściowym oraz poddane działaniu mgły solnej mają większą odporność korozyjną w środowisku 5% NaCl w porównaniu z powłoką Zn. Większa odporność korozyjna powłok stopowych Zn-Ni jest spowodowana przede wszystkim obecnością niklu - poprawia właściwości ochronne warstewki tlenkowej powstałej na powierzchni powłoki. Ponadto stwierdzono, że powłoki Zn-Ni w obecności mgły solnej charakteryzuje większa odporność korozyjna w porównaniu z powłokami Zn-Ni w stanie wyjściowym. Większą odporność korozyjną powłoki Zn-Ni poddanej działaniu mgły solnej można przypisać obecności produktów korozji na jej powierzchni, których głównym składnikiem jest faza Zn5(OH)8CI2źH2O.
Rocznik
Strony
59--70
Opis fizyczny
Bibliogr. 29 poz., fot., rys., tab.
Twórcy
autor
autor
autor
  • University of Silesia, Institute of Materials Science, Bankowa 12, 40-007 Katowice. Tel.+48-32-3591582, Fax: +48-32-3592133, j.kubiszt@o2.pl
Bibliografia
  • [1] M.E. SOARES, C.A.C. SOUZA, S.E. KURI: Corrosion resistance of a Zn-Ni electrodeposited alloy obtained with a controlled electrolyte flow and gelatin additive. Surf. Coat. Technol., 201 (2006) 6, 2953-2959.
  • [2] H. ASHASSI-SORKHABI, A. HAGRAH, N. PARVINI-AHMADI, J. MAN- ZOORI: Zinc-nickel alloy coatings electrodeposited from a chloride bath using direct and pulse current. Surf. Coat. Technol., 140 (2001) 3, 278-283.
  • [3] C.C. LIN, C.M. HUANG: Zinc-Nickel alloy coatings electrodeposited by pulse current and their corrosion behavior. J. Coat. Technol. Research, 3 (2006) 2, 99-104.
  • [4] A.P. ORDINE, S.L. DIAZ, I.C.P. MARGARIT, O.R. MATTOS: Zn-Ni and Zn-Fe alloy deposits modified by P incorporation: anticorrosion properties. Electrochim. Acta., 49 (2004) 17-18, 2815-2823.
  • [5] N. PISTOFIDIS et al.: The combined effect of nickel and bismuth on the structure of hot-dip zinc coatings. Mat. Let., 61 (2007) 10, 2007-2010.
  • [6] R. FRATESI et al.: Contemporary use of Ni and Bi in hot-dip galvanizing. Surf. Coat. Technol., 157 (2002) 1, 34-39.
  • [7] O. GIRČIENĖ et al.: Corrosion resistance of phosphated Zn-Ni alloy electrodeposits. Surf. Coat. Technol., 203 (2009) 20-21, 3072-3077.
  • [8] X. Zhang et al.: Characterization of chromate conversion coatings on zinc using XPS and SKPFM. Surf. Coat. Technol., 197 (2005) 2-3, 168-176.
  • [9] R. Ramanauskas et al.: Pulse plating effect on microstructure and corrosion properties of Zn-Ni alloy coatings. J. Solid State Electrochem., 9 (2005) 12, 900- 908.
  • [10] B. VEERARAGHAVAN, H. KIM, B. POPOV: Optimization of electroless Ni-Zn- P deposition process: experimental study and mathematical modeling. Electrochim. Acta, 49 (2004) 19, 3143-3154.
  • [11] C.E. LEHMBERG, D.B. LEWIS, G.W. MARSHALL: Composition and structure of thin electrodeposited zinc-nickel coatings. Surf. Coat. Technol., 192 (2005) 2-3, 269-277.
  • [12] I. BROOKS, U. ERB: Hardness of electrodeposited microcrystalline and nanocrystalline γ-phase Zn-Ni alloys. Scripta Materialia, 44 (2001) 5, 853-858.
  • [13] J. FEI, G.D. WILCOX: Electrodeposition of zinc-nickel compositionally modulated multilayer coatings and their corrosion behaviours. Surf. Coat. Technol., 200 (2006) 11, 3533-3539.
  • [14] I. ANNERGREN, F. ZOU, D. THIERRY: Application ot localised electrochemical techniques to study kinetics of initiation and propagation during pit growth. Electrochim. Acta, 44( 1999) 24, 4383-4393.
  • [15] G. BARIL et al.: Local electrochemical impedance spectroscopy applied to the corrosion behavior of an AZ91 magnesium alloy. J. Electrochem. Soc., 150 (2003) 10, B488-B493.
  • [16] N. IBRIS et al.: Comparative EIS study of a paste electrode containing zinc powder in neutral and near neutral solutions. J. Solid State Electrochem., 6 (2002) 2, 119- 125.
  • [17] A.Q. FU, Y.F. CHENG: Characterization of corrosion of X65 pipeline steel under disbonded coating by scanning Kelvin probe. Corrosion Science, 51 (2009) 4, 914- 920.
  • [18] A. TAHARA, T. KODAMA: Potential distribution measurement in galvanic corrosion of Zn/Fe couple by means of Kelvin probe. Corrosion Science, 42 (2000) 4, 655-673.
  • [19] C.K. CHUNG, W.T. CHANG, R.X. ZHOU: Effect of cobalt content on the work function of the electrodeposited nickel-cobalt films. Microsyst. Technol., 14 (2008) 9-11, 1389-1394.
  • [20] K. WAPNER, M. STRATMANN, G. GRUNDMEIER: Application of the scanning Kelvin probe for the study of the corrosion resistance of interfacial thin organosilane films at adhesive/metal interfaces. Silicon Chemistry, 2 (2005) 5-6, 235-245.
  • [21] J. O'M. BOCKRIS, A.K.N. REDDY: Modern Electrochemistry, vol. 2, Plenum Press, New York 1977, 883.
  • [22] E. MCCAFFERTY: Validation of corrosion rates measured by the Tafel extrapolation method. Corrosion Science, 47 (2005) 12, 3202-3215.
  • [23] M. STERN, A.L. GEARY: Electrochemical polarization: I. A theoretical analysis of the shape of polarization curves. J. Electrochem. Soc., 104 (1957) 1, 56-63.
  • [24] M.C. LI et al.: Electrochemical corrosion behavior of nanocrystalline zinc coatings in 3.5% NaCl solutions. J. Solid State Electrochem. 11 (2007) 9, 1319-1325.
  • [25] Y. HAMLAOUI, F. PEDRAZA-DIAZ, L. TIFOUTI: Comparative Study by EIS on the corrosion resistance of electroplated Zn coating in different corrosive media. J. Eng. App. Sci., 2 (2007) 4, 706-713.
  • [26] K.M. ISMAIL: Electrochemical behaviour of cadmium in NaOH solution. J. App. Electrochem., 31 (2001) 12, 1333-1338.
  • [27] B. SZCZYGIEŁ, M. KOŁODZIEJ: Composite Ni/Al2O3 coatings and their corrosion resistance. Electrochim. Acta, 50 (2005) 20, 4188-4195.
  • [28] C.H. HSU, F. MANSFELD: Technical Note: Concerning the conversion of the constant phase element parameter Y0 into a capacitance. Corrosion, 57 (2001) 9, 747-748.
  • [29] M. BOUNOUGHAZ et al.: A comparative study of the electrochemical behaviour of Algerian zinc and a zinc from a commercial sacrificial anode. J. Mat. Sci., 38 (2003) 6, 1139-1145.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BOS5-0024-0094
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.