Integrated method of technological processes estimation in materials engineering

• Autorzy: Szewieczek D. , Karkoszka T.
• Języki publikacji: EN

Abstrakty

EN

Purpose: of the presented paper is meant to explain the necessity of implementing the Integrated Quality, Environmental and Occupational Health and Safety Management System and using the proper methods of estimating the technological processes, which takes into account not only the final products but also the environmental influences and occupational health and safety; in this case in the steel wire production. Design/methodology/approach: applied for the survey has covered the integrated opinion of technological processes based on the quality, environmental and occupational health and safety criterion and using the Integrated Risk Ratio to estimate the risk connected with occurrence of nonconformities, environmental aspects and threats to occupational health and safety in the analyzed processes. Findings: of the carried out researches are as follows: the realization of quality, environmental and occupational health and safety policy by the integrated methods of technological processes estimation and in accordance with the proposed models results in the improvement of analyzed productive processes of steel wire rod, and in consequence - to their optimization both in the range of view of products' quality and in the aspect of quality of environmental influence and occupational safety. Practical implications: refers to the application in the steel wire production of the technological model and model of operational control lowering the Integrated Risk Ratio. Originality /value: of the presented paper has been achieved by application of the new methodology concerning the usage of integrated methods of technological processes estimation, including the Integrated Risk Ratio.

Słowa kluczowe

EN

quality management; environmental management; occupational health and safety; process estimation; integrated risk ratio; IRR; operational control centre

PL

zarządzanie jakością; zarządzanie środowiskiem; ochrona zdrowia; bezpieczeństwo pracy; BHP; ocena procesu; wskaźnik poziomu ryzyka; WPR; kontrola operacyjna

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2007
• Tom: Vol. 24, nr 1
• Strony: 456--465
• Opis fizyczny: Bibliogr. 38 poz., rys., tab.

Twórcy

autor

Szewieczek D.

autor

Karkoszka T.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland,

Bibliografia

• [1] I. Durlik, Management engineering. Strategy and design of production systems, Placet Publ., Warsaw, 1999.
• [2] A.P. Muhlemann, J.S. Oakland, K.G. Lockyer, Management. Production and services, PWN, Warsaw, 1995.
• [3] T. Karkoszka, D. Szewieczek, Analysis of the wire rod superficial processing based on the quality criterion, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 443-446.
• [4] D. Szewieczek, T. Karkoszka, The analysis of a technological process based on quality and environmental criterion, Proceedings of the 13th International Scientific Conference on "Achievements in Mechanical and Manufacturing Engineering" AMME’2005, Gliwice - Wisła, 2005, 285-288.
• [5] M. Roszak, Chosen aspect of evaluation of productive processes on the example of productive chains of gear, Journal of Achievements in Materials and Manufacturing Engineering 14 (2006) 184-189.
• [6] B. Krupińska, D. Szewieczek, Analysis of technological process on the basis of efficiency criterion, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 421-424.
• [7] T. Karkoszka, Modeling of the chosen processes the steel wire technology with regard to quality policy and environmental protection, Doctoral dissertation, Gliwice, 2004.
• [8] T. Karkoszka, M. Roszak, Quality and environmental aspects in the technological process management, Proceedings of the Polish Conference on Projecting & Managing of the realization of the production. Chosen subjects, Zielona Góra, 2005, 63-68.
• [9] St. Tkaczyk, T. Karkoszka, Integration of the management systems based on the quality criterion in technological processes, Proceedings of the International Conference on Integrated Management Systems - quality, environment, safety, technology, Szczyrk, 2001, 373-379.
• [10] St. Tkaczyk, T. Karkoszka, T., Superficial processing in the aspect of integrated management systems, Proceedings of the International Conference on Integrated Management Systems - quality, environment, safety, technology, Szczyrk, 2002, 461-469.
• [11] P. Lowe, H. Chapman, The Management of Technology. Perception and opportunities, Chapman & Hall, London, 1995.
• [12] A. Doniec, Conception of the sustainable development. Proceedings of the Seminary on Technical science environmental friendly, Łódź, 1995.
• [13] J. Michalska, Quality costs in the production process, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 425-428.
• [14] J. Michalska, The usage of the balanced Scorecard of the estimation of the enterprise's effectiveness, Journal of Materials Processing Technology 162-163 (2005) 751-758.
• [15] J. Michalska, D. Szewieczek, The improvement of the quality management by the activity based costing, Journal of Achievements in Materials and Manufacturing Engineering 21 (2007) 91-94.
• [16] R. Kolman, Quality in practice guide, Organizational Progress Centre Publ., Bydgoszcz, 1995.
• [17] J. Bank, Management by quality, Gebethner & Ska, Warsaw, 1997.
• [18] J.M. Juran, Quality Control Handbook. Mc Grow-Hill Publ., New York, 1988.
• [19] T. Karkoszka, D. Szewieczek, Risk of the processes in the aspect of quality, natural environment and occupational safety, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 539-542.
• [20] M. Skovic, D. Pavletic, E. Krulcic, Six Sigma process improvements in automotive parts production, Journal of Achievements in Materials and Manufacturing Engineering 19 (2006) 96-102.
• [21] M. Bobrek, V. Majstorovic, M. Sokovic, Design approach in management toward to business excellence, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2005, Gliwice – Zakopane 2005, 101-106.
• [22] A. Kania, M. Spilka, Optimization as an alternative in search of sustainable technological processes, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 413-416.
• [23] T. Karkoszka, D. Szewieczek, Operational control in the processes of the steel wire production, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2005, Gliwice-Zakopane, 2005, 450-456.
• [24] M. Bugdol, Modern management directed towards quality. Problems of integrated management. Ostrawa- Racibórz, 1999.
• [25] P. Scott, Management systems and sustainable development. The moving goal posts from environment to corporate responsibility. ISO Management Systems, 9/10/2003.
• [26] PN-N-18001. Occupational health and safety management systems. Requirements, PKN, Warsaw, 2004.
• [27] PN-EN ISO 9001. Quality management systems. Requirements, PKN, Warsaw, 2001.
• [28] PN-EN ISO 14001. Environmental management systems. Specification with guidance for use, PKN, Warsaw, 2005.
• [29] PN-N-18002. Occupational health and safety management systems. General guidelines for occupational risk assessment, PKN, Warsaw, 2000.
• [30] PN-EN ISO 9000. Quality management systems. Fundamentals and vocabulary, PKN, Warsaw, 2006.
• [31] M. Rączka, Processes' management in the quality system based on ISO 9000:2000 standard, Proceedings of the Scientific Conference on Changing organization in the changing Europe, Economical Information Publ., Krakow, 2000.
• [32] A. Solecki, Implementation of the quality management system according to ISO 9001:2000 with usage of Kema process' method, Proceedings of the Symposium of Forum ISO Club on Processing quality management in practice, Szczyrk, 2001.
• [33] M. Dudek-Burlikowska, Quality estimation of process with usage control charts type X-R and quality capability of process Cp, Cpk, Journal of Materials Processing Technology 162-163 (2005) 736-743.
• [34] M. Dudek-Burlikowska, Quality research methods as a factor of improvement of preproduction sphere, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 435-438.
• [35] D. Szewieczek, St. Tkaczyk, T. Karkoszka, QFD analysis as a manner of quality assurance in the technological process, Proceedings of the 12th International Scientific Conference on "Achievements in Mechanical and Materials Engineering" AMME'2003, Gliwice - Wisła, 2003, 919-922.
• [36] L.A. Dobrzański, Engineering materials and material projecting. The basis of material science and metallography, WNT, Warsaw, 2006.
• [37] Z. Steininger, Steel wires processing. Chosen aspects, Silesia Publ., Katowice, 1975.
• [38] Prototypical fluid-stream cleaner, RP pattern P.272130, device usage exclusivity due to the pattern regulations.