Casting structure change caused by magnetic field

• Autorzy: Szajnar J.
• Języki publikacji: EN

Abstrakty

EN

Purpose: In this work problems of crystallization process for pure metal and alloy castings solidifying under forced convection resulting from use of rotational or rotational reversing magnetic field are presented. Design/methodology/approach: Influence of changes caused by forced convection in solidification conditions on columnar crystals zone and its limitation was studied. Obtained results show that magnetic field changes thermal and concentration conditions. Both conditions are connected with magnetic field induction B, that is with liquid metal velocity Vcm ahead of crystallization front. Examples of magnetic field application for casting structure change are shown. Findings: Model of columnar to equiaxed structure transition was based on modified concentration stability criterion of crystallization front, in which measurements of alloy addition concentration along ingot radius were incorporated. Gradient-kinetic conditions were evaluated with use of computer simulation of solidification process. Crystallization conditions at the interface enabled tracking of solidification process for actual casting from its surface to its axis. It was then possible to analyze relation between thermal and concentration conditions in time of solidification and to determine position of crystallization front stability loss, which after some simplifications can be considered as the columnar crystals zone width. Research limitations/implications: Experimental results confirmed justness of introduced model. In analysis also simulation results were used describing liquid metal flow ahead of crystallization front for different types of the interface showing qualitative relations between crystallization front geometry and structure changes. Practical implications: Relations are proposed, which can be used for columnar crystals zone width taking into account nominal concentration of alloy addition Co, forced by magnetic field liquid metal velocity Vcm and thermal conditions represented by pouring temperature Tzal, thermal gradient at the crystallization front at the moment of forced convection termination GT or difference in temperature on casting cross section delta T. Originality/value: This paper is a result of several studies conducted in Foundry Department since many years and connected of physical factors (ultrasonic vibrations, electromagnetic field) influence on crystallization process of static and continuous castings.

Słowa kluczowe

EN

forced convection; magnetic field; simulation; copper concentration; structure transformation

PL

konwekcja wymuszona; pole magnetyczne; symulacja; stężenie pierwiastków; stężenie miedzi; przekształcenia struktury

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2007
• Tom: Vol. 24, nr 1
• Strony: 297--306
• Opis fizyczny: Bibliogr. 44 poz., fot., rys.

Twórcy

autor

Szajnar J.

• Division of Foundry, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland,

Bibliografia

• [1] J. Szajnar, Doctoral dissertation, Silesian University of Technology, Gliwice, 1986 (in Polish).
• [2] J. Gawroński, J. Szajnar, Solidification of Metals and Alloys 13 (1987) 5-18.
• [3] J. Szajnar, J. Gawroński, Crystallization control in magnetic field, Final report research project No. 3 0862 91 01 The State Committee for Scientific Research (SCSR), Silesian University of Technology, Gliwice 1993 (in Polish).
• [4] J. Szajnar, Theoretical model and experimental validation of columnar crystal growth process in castings solidifying in electromagnetic field, Final report research project No. P407 020 07 SCSR, Silesian University of Technology, Gliwice 1995 (in Polish).
• [5] Y. Birol, An improved practice to manufacture Al-Ti-B master alloys by reacting halide salts with molten aluminium, Journal of Alloys and Compounds 420 (2006) 71-76.
• [6] J. Szajnar, J. Gawroński, M. Cholewa, Columnar to equiaxed transition at casting solidification with convection forced, Final report research project No. 7 T08B 030 17 SCSR, Silesian University of Technology, Gliwice, 2001 (in Polish).
• [7] J. Szajnar, Columnar to equiaxed transition at casting solidification with convection forced by rotating magnetic field. Mechanics 138, Monograph, Silesian University of Technology, Gliwice, 2001 (in Polish).
• [8] J. Szajnar. The change of geometry of crystallization front in columnar crystals zone in solidification casts with magnetic field, Archives of Foundry 1 (2001) 379-384.
• [9] J. Szajnar, Changes in Cu distribution as the reason for structure transformation in castings solidifying in magnetic field. Archives of Foundry 2 (2002) 454-469 (in Polish).
• [10] B. Kusznir, Development of alloy layers technology on iron castings with use of magnetic field, Doctoral dissertation, Silesian University of Technology, Gliwice, 1979 (in Polish).
• [11] A. Pilarz, Use of electrodynamics forces for solid particles deposition in casting Doctoral dissertation, Silesian University of Technology, Gliwice, 1983 (in Polish).
• [12] J. Szajnar, T. Wróbel, Influence of magnetic field and inoculation on columnar structure transaction, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 209-212.
• [13] L.P. Gorbaczev, N.W. Nikitin, A.L. Ustinov Magnetohydrodinamic 4 (1984) 32 (in Russian).
• [14] J. Partinen, N.I. Saluja, J. Szekely, J. Kirtley, Experimental and computional invetigation of rotary electromagnetic stirring in a woods metal system, ISIJ International 34 (1994) 707-714.
• [15] O.J. Ilegbushi, J. Szekely, Metallurgical and Materials Transactions 21B (1990) 183.
• [16] S. Gansen, R. Speiser, D.R. Poirier, Metallurgical and Materials Transactions 18B (1987) 421.
• [17] N. Saluja O.J. Ilegbusi, J. Szekely, On the calculation of the electromagnetic force field in the circular stirring of metallic melts, Journal of Applied Physics 68 (1990) 5845 - 5850.
• [18] J. Gawroński, J. Szajnar, Patent PL No. 134 861 (1987).
• [19] J. Braszczyński, M. Mitko, Z. Konopka, S. Tomczyński, Influence of the vibration in the metal alloys crystallization, Fonderie 20 (1982) 23.
• [20] J. Campbell, Effects of vibration during solidification, International Metals Reviews 2 (1981) 71-108.
• [21] J. Braszczyński at all, Fonderie 20 (1982) 23, Solidification of Metals and Alloys 30 (1997) 213 (in Polish).
• [22] M.H. Burden, J.D. Hunt, Journal of Crystal Growth 22 (1974) 99.
• [23] K. Somboonsuk, J.T. Mason, R.K. Trivedi, Interdendritic spacing. I: Experimental studies Metallurgical and Materials Transactions 15A (1984) 967 - 975.
• [24] K. Somboonsuk, R. Trivedi, Dynamical studies of dendritic growth, Acta Metallurgica 33 (1985) 1051-1060.
• [25] Y. Miyata, T. Suzuki, J.I. Uno, Metall. Trans., vol. 16A, 1985, 1799.
• [26] W. Wołczyński, Role of the temperature gradient in orientated crystallization of regular eutectics, Metallurgy No. 8, Monograph, Silesian University of Technology, Gliwice, 1993 (in Polish).
• [27] I. Ziv, F.B. Weinberg, The columnar-to-equiaxed transition in Al 3 pct Cu, Metallurgical Transaction 20B (1989) 731-734.
• [28] W.J. Poole, F.B. Weinberg, Observations of the Columnar-to-Equiaxed Transition in Stainless Steel, Metallurgical Transaction, 29A (1998) 855-861.
• [29] A.E. Ares, C.E. Schvezov, Solidification parameters during the columnar to equiaxed transition in lead-tin alloys. Metallurgical and Materials Transactions 31A (2000) 1611-1625.
• [30] H. Fredrikson, El. Mahallawy, M. Taha, Scandinavian Journal of Metallurgy 15 (1986) 127.
• [31] G. Lesoult, P. Neu, J.P. Birat, Modeling of equiaxed solidification induced by electromagnetic stirring on a steel continuous caster, Proceedings of the Symposium Metallurgical Applications of Magnetohydrodynamics, Cambridge, 6-8 September 1982.
• [32] J. Braszczyński, Castings Solidification, WNT, Warszawa 1991 (in Polish).
• [33] E. Fraś, Solidification of Metals and Alloys, WN PWN, Warszawa 1992 (in Polish).
• [34] W. Kurz, D.J. Fisher, Fundamentals of solidification, 1st edition, Trans Tech Publications, Paris 1984.
• [35] J. Głownia, Solidification of Metals and Alloys 7 (1984) 147.
• [36] E. Fraś, Solidification Metals and Alloys 7 (1984) 167.
• [37] W.W. Mullins, R.F. Sekerka, Stability of a Planar Interface During Solidification of a Dilute Binary Alloy Journal of Applied Physics 35/2 (1964) 444-451.
• [38] J. Szajnar, Role of crystallization front stability at solidification of casting under magnetic field, Solidification Metals and Alloys 37 (1998) 139-149.
• [39] J. Szajnar, Columnar crystals growth stability in traditional and manufactured in magnetic field castings, Solidification of Metals and Alloys 40 (1999) 213 (in Polish).
• [40] J. Szajnar, The influence of shape of crystallization front on action effect of forced convection, Archives of Foundry 1 (2001) 385-392.
• [41] J. Gawroński, J. Szajnar, The change of columnar crystals zone in casts of solidifying in magnetic field, Archives of Foundry 1 (2003) 191-198 (in Polish).
• [42] J. Szajnar, Cu distribution in columnar crystals in castings solidifying in magnetic field, Archives of Foundry 2 (2002) 213-218 (in Polish).
• [43] J. Szajnar, The columnar to equiaxed transition at casting solidification with convection forced, Archives of Foundry, 3 (2003) 47-56 (in Polish).
• [44] J. Szajnar, The columnar crystals shape and castings structure cast in magnetic field, Journal of Materials Processing Technology 157-158 (2004) 761-764.